Lead and lead alloys - Rolled lead sheet for building purposes

This European Standard specifies the designation, the requirements for chemical composition, surface condition and dimensional tolerances for rolled lead sheet. Lead sheet covered by this European standard is made by the roll deformation process and is intended for roofs, flashings, weatherings, claddings, pre-formed panels, damp-proof courses and similar building work.
No requirements for supporting construction, design of roof or cladding systems and methods of joining are included.

Blei und Bleilegierungen - Gewalzte Bleche aus Blei für das Bauwesen

Diese Europäische Norm legt die Bezeichnung sowie Anforderungen an die chemische Zusammensetzung, Oberflächenbeschaffenheit und Maßtoleranzen für gewalzte Bleche aus Blei fest. Bleche aus Blei nach dieser Europäischen Norm werden im Formwalzverfahren hergestellt und sind für Dächer, Verwahrungen, Ab¬deckungen, Fassadenbekleidungen, vorgefertigte Fassadenelemente, wasserdichte Sperrschichten und ähnliche bautechnische Zwecke bestimmt.
Diese Norm enthält keine Anforderungen an Tragkonstruktionen, Dachkonstruktionen, Verkleidungsverfahren sowie Verbindungsmethoden.

Plomb et alliages de plomb - Feuilles de plomb laminé pour le bâtiment

La présente Norme européenne spécifie la désignation, les exigences en matiere de composition chimique,
l'aspect de surface et les tolérances dimensionnelles des feuilles de plomb laminé. Les feuilles de plomb
traitées par la présente Norme européenne sont fabriquées par laminage et sont destinées aux toitures,
accessoires d'étanchéité et de couverture, bardages, panneaux préformés, couches isolantes et travaux de
construction similaires.
Les exigences concernant le support de la construction, la conception du toit ou des systemes de bardage et
les méthodes de raccordement ne sont pas incluses.

Svinec in svinčeve zlitine - Valjana svinčena pločevina za gradbeništvo

General Information

Status
Published
Publication Date
31-Jan-2007
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2007
Due Date
01-Feb-2007
Completion Date
01-Feb-2007

Relations

Buy Standard

Standard
EN 12588:2007
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lead and lead alloys - Rolled lead sheet for building purposesQLãWYRPlomb et alliages de plomb - Feuilles de plomb laminé pour le bâtimentBlei und Bleilegierungen - Gewalzte Bleche aus Blei für das BauwesenTa slovenski standard je istoveten z:EN 12588:2006SIST EN 12588:2007en77.150.60L]GHONLLead, zinc and tin productsICS:SIST EN 12588:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 12588:200701-februar-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12588December 2006ICS 77.150.60Supersedes EN 12588:1999
English VersionLead and lead alloys - Rolled lead sheet for building purposesPlomb et alliages de plomb - Feuilles de plomb laminé pourle bâtimentBlei und Bleilegierungen - Gewalzte Bleche aus Blei für dasBauwesenThis European Standard was approved by CEN on 19 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12588:2006: E



EN 12588:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Designation.5 4.1 Material number.5 4.2 Product.5 5 Ordering information.6 6 Requirements.7 6.1 Chemical composition.7 6.2 Dimensions and tolerances.7 6.2.1 Dimensions.7 6.2.2 Tolerances.7 6.3 Surface condition.8 7 Test methods.8 7.1 Thickness.8 7.1.1 Apparatus.8 7.1.2 Procedure.8 7.2 Chemical analysis.8 7.2.1 Sampling.8 7.2.2 Method.8 8 Declaration of conformity.8 9 Marking, labelling and packaging.8 9.1 Marking and labelling.8 9.1.1 General.8 9.1.2 Colour codes for thickness.9 9.2 Packaging.9 10 Transport, storage and handling.9 11 Safety.10 Annex A (normative)
European numbering system for lead and lead alloys.11 A.1 Introduction.11 A.2 General.11 A.3 Details of the system.11 A.3.1 General.11 A.3.2 Structure of number.11 A.4 Allocation and administration of material numbers.12



EN 12588:2006 (E) 3 Foreword This document (EN 12588:2006) has been prepared by Technical Committee CEN/TC 306 “Lead and lead alloys”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. This document supersedes EN 12588:1999. Changes to the previous version, amongst others, are the following: Chemical composition: Following extensive research carried out by TNO Institution Holland it was found that higher levels of tin content improved the products resistance to surface corrosion. Therefore the impurity maximum has been increased from 0,005 % to 0,05 %. Safety: The product covered in this standard, by definition is heavy. It has been necessary to provide clear guidance on manual lifting of the product.
Environment: Studies into construction and demolition waste carried out by Enviros Aspinall have shown that the recycling rate of the product is above 90 %. Recommendations have been included within this standard on good management of surplus material during construction. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 12588:2006 (E) 4 Introduction
In this European Standard, the performance of the product has been defined as far as possible in terms of a number of type tests. The performance of a building element made with these products depends not only on the properties of the product as it is required by this European standard, but also on the design and quality of the fabrication of the building element and on the design, construction and behaviour of the part of the building concerned in relation to the environment and conditions of use. The lead sheet supplied shall be specified and used according to the National Code of Practice, depending on service conditions such as exposure to direct sunlight and the area of the piece of lead to be fixed.



EN 12588:2006 (E) 5 1 Scope This European Standard specifies the designation, the requirements for chemical composition, surface condition and dimensional tolerances for rolled lead sheet. Lead sheet covered by this European standard is made by the roll deformation process and is intended for roofs, flashings, weatherings, claddings, pre-formed panels, damp-proof courses and similar building work.
No requirements for supporting construction, design of roof or cladding systems and methods of joining are included. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 11014-1, Safety data sheet for chemical products – Part 1: Content and order of sections 3 Terms and definitions For the purposes of this European Standard, the following term and definition applies.
rolled
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.