SIST EN ISO 13585:2012

Oznaka standarda: SIST EN ISO 13585:2012
Koda projekta: 00121537
Organizacija: SIST
Naslov (angleški): Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012)
Naslov (slovenski): Trdo spajkanje - Certificiranje spajkalcev in upravljavcev (ISO 13585:2012)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN ISO 13585:2012 angleški jezik Active SIST-F: 65.34 EUR
PDF
Papir
Tehnični odbor: VAR - Varjenje
ICS: 03.100.30 25.160.50
Status: Objavljen
Objavljen: 01-Sep-2012
Refer. št. objave: Sporočila 2012-09
Referenčna oznaka: EN ISO 13585:2012
Področje projekta (angleško): This European Standard for the approval testing of brazers (as defined in 3.1) specifies basic requirements essential to the brazing process, test conditions, assessment and certificates. Because of the wide range of applications of brazing this standard does not specify detailed acceptance criteria as these are product-specific and have in each case to be agreed prior to the contract (see clause 4). It is anticipated that, where necessary, specific requirements for individual industries will be developed within this framework and detailed in the relevant application standard. The recommended format for the certificate of approval testing is given in annex A. With regard to the approval test, the brazer should be required to show adequate practical experience and knowledge of the brazing processes, materials and safety requirements for which he is to be approved to a written procedure. This standard applies to hand torch (flame) brazing and only to approval of brazers whose manipulative skills have a direct bearing on the outcome and effectiveness of the brazed joint. It does not apply to those who are not required to apply manipulative skill, since such approval is not normally necessary. If a special professional education and examination in the domestic field included brazing, this standard does not apply to a brazer while he is employed in that field. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.
Področje projekta (slovensko): Ta mednarodni standard določa osnovne zahteve za certificiranje spajkalcev in upravljavcev ter pogoje za spajkanje, preskušanje in preiskave ter prevzemna merila in razpon kvalifikacije za certifikate.
Povezava na standarde
Povezava Ime Datum
Nadomešča SIST EN 13133:2001 - Trdo spajkanje - Preskušanje spajkalcev 01-Sep-2012
Revidiran oSIST prEN ISO 13585:2020 - Trdo spajkanje - Preskušanje kvalifikacije spajkalcev in upravljavcev (ISO/DIS 13585:2020) 01-May-2020


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi