Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens

This part of EN 658 specifies the conditions for the determination of the interlaminar shear strength matrix composite materials with continuous fibre reinforcement at ambient temperature, by loading a notched specimen in compression. The method applies to unidirectionally and bidirectionally reinforced ceramic matrix composites, as well as to tridirectional composites with weak reinforcement in the third direction.

Hochleistungskeramik - Mechanische Eigenschaften von keramischen Verbundwerkstoffen bei Raumtemperatur - Teil 4: Bestimmung der Scherfestigkeit von gekerbten Proben unter Druckbeanspruchung

In diesem Teil von prEN 658 sind die Bedingungen zu Bestimmung der interlaminaren Scherfestigkeit von endlosfaserverstärkten Verbundwerkstoffen mit keramischer Matrix bei Raumtemperatur durch Druckbelastung von gekerbten Proben festgelegt. Dieses Verfahren ist für endlosfaserverstärkte keramische Verbundwerkstoffe mit unidirektionaler, bidirektionaler und bei tridirektionaler Faserverstärkung mit schwacher Verstärkung in der dritten Richtung anzuwenden.

Céramiques techniques avancées - Propriétés techniques des céramiques composites a température ambiante - Partie 4: Détermination de la résistance au cisaillement interlaminaire par compression d'éprouvettes entaillées

La présente partie de l'EN 658 décrit une méthode de détermination de la résistance au cisaillement interlaminaire des matériaux composites a matrice céramique a renforts continus, a la température ambiante par soumission d'une éprouvette entaillée a un essai de compression. Cette méthode s'applique a tous les composites a matrice céramique a renforts fibreux unidirectionnels (1D), bidirectionnels (2D), et tridirectionnels (xD, ou 2 < x < 3) conformément a l'ENV 13233.
Deux autres méthodes de détermination de la résistance au cisaillement interlaminaire sont données dans les autres parties de l'EN 658.
NOTE 1   Les caractéristiques de cisaillement interlaminaire peuvent varier d'une maniere significative selon la préparation et les dimensions de l'éprouvette, la vitesse d'application de la force, l'état de surface, etc.
NOTE 2   Les résultats d'essai obtenus par l'intermédiaire de la présente partie de l'EN 658 ne sont pas comparables aux essais obtenus par les deux autres méthodes.
NOTE 3   L'interprétation des résultats obtenus par l'intermédiaire des méthodes d'essai proposées doit etre faite avec précaution si l'on veut obtenir des valeurs absolues de la résistance au cisaillement laminaires des composites a matrice céramique a des fins de conception.

Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens

General Information

Status
Published
Publication Date
31-Dec-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2004
Due Date
01-Jan-2004
Completion Date
01-Jan-2004

Relations

Buy Standard

Standard
EN 658-4:2004
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 658-4:2004
01-januar-2004
1DGRPHãþD
SIST ENV 658-4:2000
Advanced technical ceramics - Mechanical properties of ceramic composites at
room temperature - Part 4: Determination of interlaminar shear strength by
compression loading of notched test specimens
Advanced technical ceramics - Mechanical properties of ceramic composites at room
temperature - Part 4: Determination of interlaminar shear strength by compression
loading of notched test specimens
Hochleistungskeramik - Mechanische Eigenschaften von keramischen
Verbundwerkstoffen bei Raumtemperatur - Teil 4: Bestimmung der Scherfestigkeit von
gekerbten Proben unter Druckbeanspruchung
Céramiques techniques avancées - Propriétés techniques des céramiques composites a
température ambiante - Partie 4: Détermination de la résistance au cisaillement
interlaminaire par compression d'éprouvettes entaillées
Ta slovenski standard je istoveten z: EN 658-4:2003
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST EN 658-4:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 658-4:2004

---------------------- Page: 2 ----------------------

SIST EN 658-4:2004
EUROPEAN STANDARD
EN 658-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2003
ICS 81.060.30 Supersedes ENV 658-4:1992
English version
Advanced technical ceramics - Mechanical properties of ceramic
composites at room temperature - Part 4: Determination of
interlaminar shear strength by compression loading of notched
test specimens
Céramiques techniques avancées - Propriétés techniques Hochleistungskeramik - Mechanische Eigenschaften von
des céramiques composites à température ambiante - keramischen Verbundwerkstoffen bei Raumtemperatur -
Partie 4: Détermination de la résistance au cisaillement Teil 4: Bestimmung der Scherfestigkeit von gekerbten
interlaminaire par compression d'éprouvettes entaillées Proben unter Druckbeanspruchung
This European Standard was approved by CEN on 28 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 658-4:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 658-4:2004
EN 658-4:2003 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Terms, definitions and symbols.4
5 Apparatus .5
5.1 Test machine .5
5.2 Load train.5
5.3 Dimension measuring devices .6
6 Test specimen .6
7 Test specimen preparation .8
7.1 Machining .8
7.2 Number of test specimens.8
8 Procedure .8
8.1 Displacement rate .8
8.2 Measurement of test specimens .8
8.3 Testing technique .8
8.4 Test validity .8
9 Calculation.9
9.1 Test specimen origin .9
9.2 Interlaminar shear strength .9
10 Test report .9
Annex A (informative) Examples of rupture .10
A.1 Valid rupture.10
A.2 Non-valid rupture .10
Bibliography .11
2

---------------------- Page: 4 ----------------------

SIST EN 658-4:2004
EN 658-4:2003 (E)
Foreword
This document (EN 658-4:2003) has been prepared by Technical Committee CEN/TC 184 "Advanced technical
ceramics", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by August 2003, and conflicting national standards shall be withdrawn at the latest by
August 2003.
This document supersedes ENV 658-4:1992.
Annex A is informative.
EN 658 'Advanced technical ceramics – Mechanical properties of ceramic composites at room temperature' has six
parts:
 Part 1 : Determination of tensile properties
 Part 2 : Determination of compressive properties
 Part 3 : Determination of flexural strength
 Part 4 : Determination of interlaminar shear strength by compression loading of notched test specimens
 Part 5 : Determination of interlaminar shear strength by short span bend test (three-points)
 Part 6 : Determination of interlaminar shear strength by double-punch shearing
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 658-4:2004
EN 658-4:2003 (E)
1 Scope
This part of EN 658 specifies the conditions for determination of the interlaminar shear strength of ceramic matrix
composite materials with continuous fibre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.