Bitumen and bituminous binders - Framework for specification of hard industrial bitumens

This European Standard provides a framework for the specification of hard industrial bitumens used mainly in flooring, varnishes, mineral rubber, roofing and mastic.
Within Europe several types of hard industrial bitumen are used, and dependent upon traditional practices, different grades may be used for the same purpose. The framework given in this European standard provides a basis for quality agreements to be established between supplier and client.
The hard industrial bitumen products are graded by the limits of the ring and ball softening point values, expressed as multiples of 5, and are characterised by an H in front of the values.

Bitumen und bitumenhaltige Bindemittel - Spezifikationsrahmen für Hartbitumen für industrielle Anwendungen

Diese Europäische Norm legt einen Rahmen für die Anforderungen an Hartbitumen fest, das hauptsächlich in
Fußböden, Lacken, geblasenem Bitumen, Dachbelägen und Mastix verwendet wird.
In Europa werden verschiedene Arten Hartbitumen verwendet. Je nach traditioneller Technik können
unterschiedliche Sorten für denselben Zweck verwendet werden. Der in dieser Norm enthaltene Rahmen liefert
eine Grundlage für Qualitätsvereinbarungen zwischen dem Lieferanten und dem Kunden.
Die Produkte von Hartbitumen werden durch die Grenzwerte des Erweichungspunktes Ring und Kugel unterteilt,
ausgedrückt als Vielfache von 5 und durch ein H vor den Werten gekennzeichnet.

Bitumes et liants bitumineux - Cadre de spécifications des bitumes industriels durs

La présente Norme européenne prescrit un cadre pour les spécifications des bitumes industriels durs utilisés principalement dans les revêtements de sols, les vernis, les caoutchoucs, les toitures et les mastics. Plusieurs types de bitumes industriels durs sont utilisés en Europe, et en fonction des conditions climatiques, du type de construction et des pratiques traditionnelles, des qualités différentes peuvent être utilisés pour des applications similaires. Le cadre indiqué dans la présente norme européenne fournit une base pour les accords portant sur la qualité établis entre client et fournisseur. Les bitumes industriels durs sont classés selon les limites du point de ramollissement Bille Anneau, exprimés par multiples de 5, et sont désignés par la lettre H placée avant ces valeurs.

Bitumen in bitumenska veziva - Okvirna specifikacija za trde industrijske bitumne

General Information

Status
Published
Public Enquiry End Date
04-Jan-2009
Publication Date
11-Jun-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-May-2009
Due Date
30-Jul-2009
Completion Date
12-Jun-2009

Relations

Buy Standard

Standard
EN 13305:2009
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k prEN 13305:2008
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Okvirna specifikacija za trde industrijske bitumneBitumen und bitumenhaltige Bindemittel - Spezifikationsrahmen für Hartbitumen für industrielle AnwendungenBitumes et liants bitumineux - Cadre de spécifications des bitumes industriels dursBitumen and bituminous binders - Framework for specification of hard industrial bitumens91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13305:2009SIST EN 13305:2009en,de01-julij-2009SIST EN 13305:2009SLOVENSKI
STANDARDSIST EN 13305:20031DGRPHãþD



SIST EN 13305:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13305March 2009ICS 75.140; 91.100.50Supersedes EN 13305:2003
English VersionBitumen and bituminous binders - Framework for specification ofhard industrial bitumensBitumes et liants bitumineux - Cadre de spécifications desbitumes industriels dursBitumen und bitumenhaltige Bindemittel -Spezifikationsrahmen für Hartbitumen für industrielleAnwendungenThis European Standard was approved by CEN on 10 February 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13305:2009: ESIST EN 13305:2009



EN 13305:2009 (E) 2 Contents
Page Foreword .31 Scope .42 Normative references .43 Properties and test methods .44 Typical grades .5 SIST EN 13305:2009



EN 13305:2009 (E) 3 Foreword This document (EN 13305:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to th
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Okvirna specifikacija za trde industrijske bitumneBitumen und bitumenhaltige Bindemittel - Spezifikationsrahmen für Hartbitumen für industrielle AnwendungenBitumes et liants bitumineux - Cadre de spécifications des bitumes industriels dursBitumen and bituminous binders - Framework for specification of hard industrial bitumens91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:prEN 13305kSIST prEN 13305:2008en,fr,de01-december-2008kSIST prEN 13305:2008SLOVENSKI
STANDARD



kSIST prEN 13305:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 13305October 2008ICS 75.140; 91.100.50Will supersede EN 13305:2003
English VersionBitumen and bituminous binders - Framework for specification ofhard industrial bitumensBitumes et liants bitumineux - Cadre de spécifications desbitumes industriels dursBitumen und bitumenhaltige Bindemittel -Spezifikationsrahmen für Hartbitumen für industrielleAnwendungenThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 336.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 13305:2008: EkSIST prEN 13305:2008



prEN 13305:2008 (E) 2 Contents
Page Foreword.3 1 Scope.4 2 Normative references.4 3 Properties and test methods.4 4 Typical grades.5 Bibliography.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.