SIST EN 1870-19:2014

Oznaka standarda: SIST EN 1870-19:2014
Koda projekta: 00142157
Organizacija: SIST
Naslov (angleški): Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws
Naslov (slovenski): Varnost lesnoobdelovalnih strojev - Krožne žage - 19. del: Krožne žage (z dodajalno mizo ali brez nje) in krožne žage, ki se uporabljajo na gradbišču
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
oSIST prEN 1870-19:2012 angleški jezik Withdrawn SIST-M: 108.90 EUR
PDF
Papir
SIST EN 1870-19:2014 angleški jezik Active SIST-M: 108.90 EUR
PDF
Papir
Tehnični odbor: VSN - Varnost strojev in naprav
ICS: 25.080.60 79.120.10 91.220
Status: Objavljen
Objavljen: 01-mar-2014
Refer. št. objave: Sporocila 2014-03
Razveljavitev: 01-nov-2019
Referenca razveljavitve: Sporocila 2019-11
Področje projekta (angleško): This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit) and building site saws, hereinafter referred to as “machines”, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to cut wood-based material may also be used for cutting hardened plastic materials with similar physical characteristics as wood. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting. For the purpose of this document, building site saws having a tiltable spindle are considered to be circular saw benches. This document is not applicable to circular saw benches (with and without sliding table) and building site saws which are manufactured before the date of its publication as EN.
Povezava na standarde
Povezava Ime Datum
Nadomeščen z SIST EN ISO 19085-10:2019 - Lesnoobdelovalni stroji - Varnost - 10. del: Žage, ki se uporabljajo na gradbišču (ISO 19085-10:2018) 12-jun-2019
Revidiran kSIST FprEN ISO 19085-9:2018 - Lesnoobdelovalni stroji - Varnost - 9. del: Krožne žage (s podajalno mizo ali brez nje) (ISO/DIS 19085-9:2016, spremenjen) 03-avg-2016
Nadomešča SIST EN 1870-1:2007+A1:2009 - Varnost lesnoobdelovalnih strojev - Krožne žage - 1. del: Delovne mize (s podajalno mizo ali brez nje), žage za rezanje na mero in žage na gradbišču 01-mar-2014


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi