Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service; Functional capabilities and information flows

Stage 2 descriptions for priority 1 and 2 services covered in the MoU on ISDN

Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev: čakajoči klic (CW) - Funkcijske zmožnosti in informacijski tokovi

General Information

Status
Published
Publication Date
30-Apr-1997
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-1997
Due Date
01-May-1997
Completion Date
01-May-1997

Buy Standard

Standard
P ETS 300 057:1997
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETS 300 057:1997
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service; Functional capabilities and information flows33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 057 E13SIST ETS 300 057:1997en01-jDQXDU-19973SIST ETS 300 057:1997SLOVENSKI
STANDARD



SIST ETS 300 057:1997



EUROPEANETS 300 057TELECOMMUNICATIONMay 1992STANDARDSource: ETSI TC-SPSReference: T/S 22-02ICS:33.080Key words:ISDN, supplementary servicesIntegrated Services Digital Network (ISDN);Call Waiting (CW) supplementary serviceFunctional capabilities and information flowsETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1992. All rights reserved.SIST ETS 300 057:1997



Page 2ETS 300 057: May 1992Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 057:1997



Page 3ETS 300 057: May 1992ContentsForeword.51Scope.72Normative references.73Definitions.84Symbols and abbreviations.85Description.96Derivation of the functional model.96.1Functional model description.96.2Description of the functional entities.96.3Relationship with a basic service.97Information flow.107.1Information flow diagrams.107.2Definition of individual information flows.117.2.1Relationship ra.117.2.1.1Contents of INFORM.117.2.2Relationship rb.117.2.2.1Contents of SETUP.117.2.2.2Contents of CONNECTED.118SDL diagrams for functional entities.118.1CW supplementary service functions in FE1.128.2CW supplementary service functions in FE2.148.3CW supplementary service functions in FE3.199Functional entity actions (FEAs).219.1FEAs of FE1.219.2FEAs of FE2.219.3FEAs of FE3.2110Allocation of functional entities to physical locations.22History.23SIST ETS 300 057:1997



Page 4ETS 300 057: May 1992Blank pageSIST ETS 300 057:1997



Page 5ETS 300 057: May 1992ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols &Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).In accordance with CCITT Recommendation I.130 [1], the following three level structure is used todescribe the supplementary telecommunications services as provided by European publictelecommunications operators under the pan-European Integrated Services Digital Network (ISDN):-Stage 1: is an overall service description, from the user's standpoint;-Stage 2: identifies the functional capabilities and information flows needed to support the servicedescribed in stage 1; and-Stage 3: defines the signalling system protocols and switching functions needed to implement theservice described in stage 1.This ETS details the stage 2 aspects (functional capabilities and information flows) needed to support theCall Waiting (CW) supplementary service.
The stage 1 and stage 3 aspects are detailed in ETS 300 056(1991) and ETS 300 058 (1991), respectively.SIST ETS 300 057:1997



Page 6ETS 300 057: May 1992Blank pageSIST ETS 300 057:1997



Page 7ETS 300 057: May 19921ScopeThis standard defines the stage two of the Call Waiting (CW) supplementary service for the pan-EuropeanIntegrated Services Digital Network (ISDN) as provided by European public telecommunications operators.Stage two identifies the functional capabilities and the information flows needed to support the stage 1service description. The stage two description also identifies user operations not directly associated with acall (see CCITT Recommendation I.130 [1]).This standard is specified according to the methodology specified in CCITT Recommendation Q.65 [2].This standard does not formally describe the relationship between this supplementary service and thebasic call but, where possible, the information is included for guidance.In addition, this standard does not specify the requirements where the service is provided to the user via aprivate ISDN. This standard does not specify the requirements for the allocation of defined functionalentities within a private ISDN; it does however define which functional entities may be allocated to a privateISDN.This standard does not specify the additional requirements where the service is provided to the user via atelecommunications network that is not an ISDN.The CW supplementary service permits a user to be informed of an incoming call (as per basic callprocedures) with an indication that no interface information channel is available. The user then has thechoice of accepting, rejecting or ignoring the waiting call (as per basic call procedures).The CW supplementary service is considered meaningful when applied to the telephony teleservice and thespeech and 3,1 kHz audio bearer services. Furthermore, it may also be applied to other circuit-switchedservices.This standard is applicable to the stage three standards for the ISDN CW supplementary service. The term"stage three" is also defined in CCITT Recommendation I.130 [1]. Where the text indicates the status of arequirement, i.e. as a strict command or prohibition, as authorisation leaving freedom, as a capability orpossibility, this shall be reflected in the text of the relevant and stage three standards.Furthermore, conformance to this standard is met by conforming to the stage three standards with the fieldof application appropriate to the equipment being implemented. Therefore no method of testing is providedfor this standard.2Normative referencesThis ETS incorporates by dated or undated reference, provisions from other publications. These normativereferences are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this ETSonly when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies.[1]CCITT Recommendation I.130 (1988): "Method for the characterisation oftelecommunication services supported by an ISDN and network capabilities of anISDN".[2]CCITT Recommendation Q.65 (1988): "Stage 2 of the method for thecharacterisation of services supported by an ISDN".[3]ETS 300 056 (1991): "Integrated Services Digital Network (ISDN); Call Waiting(CW) supplementary service; Service description".SIST ETS 300 057:1997



Page 8ETS 300 057: May 1992[4]CCITT Recommendation I.112 (1988): "Vocabulary of terms for ISDNs".[5]ETS 300 140 (1992): "Integrated Services Digital Network (ISDN); Call Hold(HOLD) supplementary service; Functional capabilities and information flows".[6]CCITT Recommendation Q.71 (1988): "ISDN 64 kbit/s circuit mode switchedbearer services".[7]CCITT Recommendation I.210 (1988): "Principles of telecommunicationsservices supported by an ISDN and the means used to describe them".[8]CCITT Recommendation Z.100 (1988): "Functional Specification and DescriptionLanguage (SDL)".3DefinitionsFor the purposes of this standard, the following definitions apply:Information channel con
...

SLOVENSKI STANDARD
SIST ETS 300 057:1997
01-maj-1997
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL ,6'1 'RSROQLOQDVWRULWHYþDNDMRþL
NOLF &: )XQNFLMVNH]PRåQRVWLLQLQIRUPDFLMVNLWRNRYL
Integrated Services Digital Network (ISDN); Call Waiting (CW) supplementary service;
Functional capabilities and information flows
Ta slovenski standard je istoveten z: ETS 300 057 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 057:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 057:1997

---------------------- Page: 2 ----------------------

SIST ETS 300 057:1997
EUROPEAN ETS 300 057
TELECOMMUNICATION May 1992
STANDARD
Source: ETSI TC-SPS Reference: T/S 22-02
ICS: 33.080
ISDN, supplementary services
Key words:
Integrated Services Digital Network (ISDN);
Call Waiting (CW) supplementary service
Functional capabilities and information flows
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1992. All rights reserved.
New presentation - see History box

---------------------- Page: 3 ----------------------

SIST ETS 300 057:1997
Page 2
ETS 300 057: May 1992
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 057:1997
Page 3
ETS 300 057: May 1992
Contents
Foreword.5
1 Scope .7
2 Normative references .7
3 Definitions.8
4 Symbols and abbreviations.8
5 Description .9
6 Derivation of the functional model .9
6.1 Functional model description .9
6.2 Description of the functional entities.9
6.3 Relationship with a basic service .9
7 Information flow .10
7.1 Information flow diagrams.10
7.2 Definition of individual information flows.11
7.2.1 Relationship ra.11
7.2.1.1 Contents of INFORM .11
7.2.2 Relationship rb.11
7.2.2.1 Contents of SETUP.11
7.2.2.2 Contents of CONNECTED.11
8 SDL diagrams for functional entities.11
8.1 CW supplementary service functions in FE1 .12
8.2 CW supplementary service functions in FE2 .14
8.3 CW supplementary service functions in FE3 .19
9 Functional entity actions (FEAs).21
9.1 FEAs of FE1.21
9.2 FEAs of FE2.21
9.3 FEAs of FE3.21
10 Allocation of functional entities to physical locations.22
History.23

---------------------- Page: 5 ----------------------

SIST ETS 300 057:1997
Page 4
ETS 300 057: May 1992
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 057:1997
Page 5
ETS 300 057: May 1992
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols &
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).
In accordance with CCITT Recommendation I.130 [1], the following three level structure is used to
describe the supplementary telecommunications services as provided by European public
telecommunications operators under the pan-European Integrated Services Digital Network (ISDN):
- Stage 1: is an overall service description, from the user's standpoint;
- Stage 2: identifies the functional capabilities and information flows needed to support the service
described in stage 1; and
- Stage 3: defines the signalling system protocols and switching functions needed to implement the
service described in stage 1.
This ETS details the stage 2 aspects (functional capabilities and information flows) needed to support the
Call Waiting (CW) supplementary service. The stage 1 and stage 3 aspects are detailed in ETS 300 056
(1991) and ETS 300 058 (1991), respectively.

---------------------- Page: 7 ----------------------

SIST ETS 300 057:1997
Page 6
ETS 300 057: May 1992
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 057:1997
Page 7
ETS 300 057: May 1992
1 Scope
This standard defines the stage two of the Call Waiting (CW) supplementary service for the pan-European
Integrated Services Digital Network (ISDN) as provided by European public telecommunications operators.
Stage two identifies the functional capabilities and the information flows needed to support the stage 1
service description. The stage two description also identifies user operations not directly associated with a
call (see CCITT Recommendation I.130 [1]).
This standard is specified according to the methodology specified in CCITT Recommendation Q.65 [2].
This standard does not formally describe the relationship between this supplementary service and the
basic call but, where possible, the information is included for guidance.
In addition, this standard does not specify the requirements where the service is provided to the user via a
private ISDN. This standard does not specify the requirements for the allocation of defined functional
entities within a private ISDN; it does however define which functional entities may be allocated to a private
ISDN.
This standard does not specify the additional requirements where the service is provided to the user via a
telecommunications network that is not an ISDN.
The CW supplementary service permits a user to be informed of an incoming call (as per basic call
procedures) with an indication that no interface information channel is available. The user then has the
choice of accepting, rejecting or ignoring the waiting call (as per basic call procedures).
The CW supplementary service is considered meaningful when applied to the telephony teleservice and the
speech and 3,1 kHz audio bearer services. Furthermore, it may also be applied to other circuit-switched
services.
This standard is applicable to the stage three standards for the ISDN CW supplementary service. The term
"stage three" is also defined in CCITT Recommendation I.130 [1]. Where the text indicates the status of a
requirement, i.e. as a strict command or prohibition, as authorisation leaving freedom, as a capability or
possibility, this shall be reflected in the text of the relevant and stage three standards.
Furthermore, conformance to this standard is met by conforming to the stage three standards with the field
of application appropriate to the equipment being implemented. Therefore no method of testing is provided
for this standard.
2 Normative references
This ETS incorporates by dated or undated reference, provisions from other publications. These normative
references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this ETS
only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies.
[1] CCITT Recommendation I.130 (1988): "Method for the characterisation of
telecommunication services supported by an ISDN and network capabilities of an
ISDN".
[2] CCITT Recommendation Q.65 (1988): "Stage 2 of the method for the
characterisation of services supported by an ISDN".
[3] ETS 300 056 (1991): "Integrated Services Digital Network (ISDN); Call Waiting
(CW) supplementary service; Service description".

---------------------- Page: 9 ----------------------

SIST ETS 300 057:1997
Page 8
ETS 300 057: May 1992
[4] CCITT Recommendation I.112 (1988): "Vocabulary of terms for ISDNs".
[5] ETS 300 140 (1992): "Integrated Services Digital Network (ISDN); Call Hold
(HOLD) supplementary service; Functional capabilities and information flows".
[6] CCITT Recommendation Q.71 (1988): "ISDN 64 kbit/s circuit mode switched
bearer services".
[7] CCITT Recommendation I.210 (1988): "Principles of telecommunications
services supported by an ISDN and the means used to describe them".
[8] CCITT Recommendation Z.100 (1988): "Functional Specification and Description
Language (SDL)".
3 Definitions
For the purposes of this standard, the following definitions apply:
Information channel control: a terminal that has information channel control is active on a call, is alerting
for an incoming call, has an outgoing call for which a channel has been selected, or has a call on hold with
reservation.
Integrated Services Digital Network (ISDN): see CCITT Recommendation I.112 [4], § 2.3, definition 308.
Service; telecommunications service: see CCITT Recommendation I.112 [4], § 2.2, definition 201.
Subscriber B: see ETS 300 056 [3], Clause 3.
Supplementary service: see CCITT Recommendation I.210 [7], § 2.4.
User A: see ETS 300 056 [3], Clause 3.
User B: see ETS 300 056 [3], Clause 3.
User C: see ETS 300 056 [3], Clause 3.
4 Symbols and abbreviations
CC Call Control
CCA Call Control Agent
CW Call Waiting
FEA Functional Entity Action
ISDN Integrated Services Digital Network
LE Local Exchange
PTNX Private Telecommunications Network Exchange
SDL Specification and Description Language

---------------------- Page: 10 ----------------------

SIST ETS 300 057:1997
Page 9
ETS 300 057: May 1992
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.