SIST EN ISO 9606-4:1999

Oznaka standarda: SIST EN ISO 9606-4:1999
Koda projekta: 00121099
Organizacija: SIST
Naslov (angleški): Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
Naslov (slovenski): Preskušanje varilcev - Talilno varjenje - 4. del: Nikelj in nikljeve zlitine (ISO 9606-4:1999)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN ISO 9606-4:1999 angleški jezik Active SIST-F: 65.34 EUR
PDF
Papir
Tehnični odbor: VAR - Varjenje
ICS: 03.100.30 25.160.10 77.120.40
Status: Objavljen
Objavljen: 01-Dec-1999
Refer. št. objave: Sporocila 1999-12-01
Referenčna oznaka: EN ISO 9606-4:1999
Področje projekta (angleško): This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper. This standard applies to the approval testing of welders for the fusion welding of copper. This standard is intended to provide the basics for the mutual recognition by examining bodies for approval relating to welders' competence in the various fields of application. Tests will be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard when these are applied. During the approval test the welder should be required to show adequate practical experience and job knowledge (test non mandatory) of the welding processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A. This standard is applicable when the welder's approval testing is required by the purchaser, by inspection authorities or by other organizations. The welding processes referred to in this standard include those fusion welding proceses which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automatic processes (see 5.2). This standard covers approval testing of welders for work on semi-finished and finished products made from wrought, forged or cast material types listed in 5.4. The certificate of approval testing is issued under the sole responsibility of the examiner or examining body.

Najbolje prodajani standardi