Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure

This standard specifies the method of test for determining the resistance of paints and varnishes to the effects of heat or cold within the limits of - 50 °C to 200 °C.
The test procedure assesses the resistance of paint coatings, varnishes or related products to changes of gloss, colour, blistering, cracking and/or detachment from the substrate as a result of exposure to elevated or sub ambient temperature.
The procedure is applicable to products intended for use in aerospace applications.

Luft- und Raumfahrt - Anstrichstoffe - Thermische Belastung

Diese Norm legt die Verfahren zum Prüfen der Beständigkeit von Beschichtungen gegenüber den Auswirkungen von Hitze oder Kälte von – 50 °C bis 200 °C fest.
Das Prüfverfahren beurteilt die Beständigkeit von Beschichtungen und ähnlichen Produkten hinsichtlich der Veränderungen von Glanz, Farbe, Blasenbildung, Rissbildung und/oder Ablösung vom Untergrund als Ergebnisse der Beanspruchung mit hohen oder niedrigen Umgebungstemperaturen.
Dieses Verfahren ist auf Produkte anwendbar, die für den Einsatz in Luft- und Raumfahrt bestimmt sind.

Série aérospatiale - Peintures et vernis - Détermination de l’effet thermique

Aeronavtika - Barve in laki - Ugotavljanje toplotne obremenitve

Ta standard določa preskusno metodo za ugotavljanje odpornosti barv in lakov na učinke vročine ali mraza v mejah -50 °C do 200 °C.
Preskusni postopek oceni odpornost barvnih premazov, lakov ali povezanih proizvodov za spremembe sijaja, barve, mehurjenja, pokanja in/ali odstopanja od pripravka kot rezultat izpostavljenosti povišani temperaturi ali temperaturi, nižji od okolice.
Postopek velja za proizvode, namenjene uporabi v aeronavtiki.

General Information

Status
Published
Publication Date
23-Oct-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Oct-2011
Due Date
19-Dec-2011
Completion Date
24-Oct-2011

Buy Standard

Standard
EN 4160:2011
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Barve in laki - Ugotavljanje toplotne obremenitveLuft- und Raumfahrt - Anstrichstoffe - Thermische BelastungSérie aérospatiale - Peintures et vernis - Détermination de l’effet thermiqueAerospace series - Paints and varnishes - Determination of the effect of thermal exposure49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industryICS:Ta slovenski standard je istoveten z:EN 4160:2011SIST EN 4160:2011en01-december-2011SIST EN 4160:2011SLOVENSKI
STANDARD



SIST EN 4160:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4160
May 2011 ICS 49.040 English Version
Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure
Série aérospatiale - Peintures et vernis - Détermination de l'effet thermique
Luft- und Raumfahrt - Beschichtungsstoffe - Thermische Beanspruchung This European Standard was approved by CEN on 3 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4160:2011: ESIST EN 4160:2011



EN 4160:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .45 Apparatus .56 Specimens .57 Procedure .58 Supplementary information .69 Test report .610 Designation .6 SIST EN 4160:2011



EN 4160:2011 (E) 3 Foreword This document (EN 4160:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn at the latest by November 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4160:2011



EN 4160:2011 (E) 4 1 Scope This European Standard specifies the method of test for determining the resistance of paints and varnishes to the effects of heat or cold within the limits of − 50 °C to 200 °C. The test procedure assesses the resistance of paint coatings, varnishes or related products to changes of gloss, colour, blistering, cracking and/or detachment from the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.