SIST EN 869:2007

Oznaka standarda: SIST EN 869:2007
Koda projekta: 00202009
Organizacija: SIST
Naslov (angleški): Safety of machinery - Safety requirements for pressure metal diecasting units
Naslov (slovenski): Varnost strojev - Varnostne zahteve za enote za tlačno ulivanje kovin
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 869:2007 angleški jezik Withdrawn SIST-I: 85.91 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 25.120.30
Status: Razveljavljen
Objavljen: 01-jan-2007
Refer. št. objave: Sporocila 2007-01-01
Razveljavitev: 01-jun-2009
Referenca razveljavitve: Sporočila 2009-06
Referenčna oznaka: EN 869:2006
Področje projekta (angleško): This European Standard specifies the safety requirements for pressure metal diecasting units. It applies to pressure diecasting machines and to the interfaces with the following ancillary equipment: - die, - melting, holding and dosing furnaces (see EN 746-1), - metal feeding equipment, - inserting and removal devices, - spraying appliances, - heat exchanger for the die. This ancillary equipment itself is not covered. Additional risks arising from the material being cast are not covered. This standard does not apply to low pressure diecasting machines and/or gravity diecasting machines. This standard deals with all significant hazards, hazardous situations and events relevant to pressure diecasting machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable failures or malfunctions that may occur in the equipment. This document is not applicable to pressure metal diecasting units/machinery which are manufactured before the date of its publication as EN.
Povezava na standarde
Povezava Ime Datum
Nadomešča SIST EN 869:2000 - Safety requirements for high pressure metal diecasting units 01-jan-2007
Konsolidiran z SIST EN 869:2007+A1:2009 - Varnost strojev - Varnostne zahteve za enote za tlačno ulivanje kovin 01-jun-2009
Revidiran SIST EN 869:2007/kprA1:2008 - Varnost strojev - Varnostne zahteve za enote za tlačno ulivanje kovin 01-nov-2008


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi