Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6: Determination of water absorption

This standard specifies the test methods for determining the water absorption of foaming structural adhesives when exposed to high humidity or immersed in water.

Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Expansionsklebstoffe - Prüfverfahren - Teil 6: Bestimmung der Wasseraufnahme

Diese Norm legt die Verfahren zur Bestimmung der Wasseraufnahme von strukturellen Expansionsklebstoffen fest, wenn diese hoher Feuchte ausgesetzt oder in Wasser eingetaucht werden.

Série aérospatiale - Matériaux non-métalliques - Adhésifs structuraux expansibles - Méthodes d'essai - Partie 6: Détermination de l'absorption d'eau

Cette norme spécifie les méthodes de détermination de l'absorption d'eau des adhésifs structuraux en films expansibles lorsqu'ils sont exposés a une grande humidité ou immergés dans l'eau.

Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6: Determination of water absorption

General Information

Status
Published
Publication Date
30-Apr-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004

Buy Standard

Standard
EN 2667-6:2004
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6: Determination of water absorptionLuft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Expansionsklebstoffe - Prüfverfahren - Teil 6: Bestimmung der WasseraufnahmeSérie aérospatiale - Matériaux non-métalliques - Adhésifs structuraux expansibles - Méthodes d'essai - Partie 6: Détermination de l'absorption d'eauAerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6: Determination of water absorption49.025.50LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 2667-6:2001SIST EN 2667-6:2004en01-maj-2004SIST EN 2667-6:2004SLOVENSKI
STANDARD



SIST EN 2667-6:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2667-6December 2001ICS 49.025.50English versionAerospace series - Non-metallic materials - Foaming structuraladhesives - Test methods - Part 6: Determination of waterabsorptionSérie aérospatiale - Matériaux non-métalliques - Adhésifsstructuraux expansibles - Méthodes d'essai - Partie 6:Détermination de l'absorption d'eauLuft- und Raumfahrt - Nichtmetallische Werkstoffe -Strukturelle Expansionsklebstoffe - Prüfverfahren - Teil 6:Bestimmung der WasseraufnahmeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2667-6:2001 ESIST EN 2667-6:2004



EN 2667-6:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn atthe latest by June 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.SIST EN 2667-6:2004



EN 2667-6:2001 (E)31ScopeThis standard specifies the test methods for determining the water absorption of foaming structural adhesiveswhen exposed to high humidity or immersed in water.2Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references thelatest edition of the publication referred to applies.EN 2667-3Aerospace series - Non-metallic materials - Foaming structural adhesive films - Testmethods - Part 3: Expansion ratio and volatile content 1)3PrincipleWeighing of test pieces before and after exposure to a specified en
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.