Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS)

This part of IEC 62056 specifies the overall structure of the OBject Identification System
(OBIS) and the mapping of all commonly used data items in metering equipment to their
identification codes.
OBIS provides a unique identifier for all data within the metering equipment, including not only
measurement values, but also abstract values used for configuration or obtaining information
about the behaviour of the metering equipment. The ID codes defined in this document are
used for the identification of:
• logical names of the various instances of the ICs, or objects, as defined in IEC 62056-6-2;
• data transmitted through communication lines;
• data displayed on the metering equipment, see Clause A.2.
This document applies to all types of metering equipment, such as fully integrated meters,
modular meters, tariff attachments, data concentrators, etc.
To cover metering equipment measuring energy types other than electricity, combined
metering equipment measuring more than one type of energy or metering equipment with
several physical measurement channels, the concepts of medium and channels are
introduced. This allows meter data originating from different sources to be identified. While
this document fully defines the structure of the identification system for other media, the
mapping of non-electrical energy related data items to ID codes is completed separately.
NOTE EN 13757-1:2014 defines identifiers for metering equipment other than electricity: heat cost allocators,
thermal energy, gas, cold water and hot water.

Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 6-1: COSEM Object Identification System (OBIS)

Echange des données de comptage de l'électricité - La suite DLMS/COSEM - Partie 6-1: Système d'identification des objets (OBIS)

L'IEC 62056-6-1:2017 spécifie la structure globale du Système d'Identification d’OBjet (OBIS) et la mise en correspondance de tous les éléments de données couramment utilisés dans le matériel de comptage avec leurs codes d'identification. Cette troisième édition annule et remplace la deuxième édition de l’IEC 62056-6-1, parue en 2015. Cette édition constitue une révision technique.
Les modifications techniques majeures par rapport à l'édition précédente sont énumérées dans l’Annexe B (informative).

Izmenjevanje podatkov za odbiranje stanja števcev - Sestav DLMS/COSEM - 6-1. del: Sistem za prepoznavanje objektov (OBIS)

Ta del standarda IEC 62056 določa splošno strukturo sistema za prepoznavanje objektov (OBIS) in preslikave vseh pogosto uporabljanih podatkovnih elementov v opremi za merjenje v njihove identifikacijske oznake. Sistem OBIS zagotavlja enolično oznako za vse podatke v opremi za merjenje, vključno z vrednostmi meritev in abstraktnimi vrednostmi, ki se uporabljajo za konfiguracijo ali pridobivanje informacij o delovanju opreme za merjenje. Oznake ID, opredeljene v tem dokumentu, se uporabljajo za prepoznavanje:
• logičnih imen različnih primerkov integriranih vezij ali objektov, kot je opredeljeno v standardu IEC 62056-6-2;
• podatkov, prenesenih prek komunikacijskih vodov;
• podatkov, prikazanih prek opreme za merjenje (glej točko A.2).
Ta dokument se uporablja za vse vrste opreme za merjenje, kot so vgrajeni števci, modularni števci, tarifni priključki, podatkovni koncentratorji itd.
Za potrebe opreme za merjenje energije, ki ni električna energija, kombinirane opreme za merjenje več kot ene vrste energije ali opreme za merjenje z več fizičnimi merilnimi kanali sta uvedena koncepta medija in kanalov. To omogoča prepoznavanje merilnih podatkov z različnih virov. Čeprav ta dokument v celoti opredeljuje strukturo sistema prepoznavanja za druge medije, se preslikava podatkovnih elementov, povezanih z energijo druge vrste, v oznake ID izvede ločeno.
OPOMBA: Standard EN 13757-1:2014 opredeljuje oznake za opremo za merjenje energije, ki ni električna energija: delilniki stroškov, toplotna energija, plin, hladna in vroča voda.

General Information

Status
Published
Publication Date
28-Jan-2018
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Jan-2018
Due Date
22-Mar-2018
Completion Date
29-Jan-2018

Relations

Buy Standard

Standard
EN 62056-6-1:2018
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62056-6-1:2018
01-marec-2018
1DGRPHãþD
SIST EN 62056-6-1:2017
Izmenjevanje podatkov za odbiranje stanja števcev - Sestav DLMS/COSEM - 6-1.
del: Sistem za prepoznavanje objektov (OBIS)
Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object
Identification System (OBIS)
Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 6-1:
COSEM Object Identification System (OBIS)
Echange des données de comptage de l'électricité - La suite DLMS/COSEM - Partie 6-1:
Système d'identification des objets (OBIS)
Ta slovenski standard je istoveten z: EN 62056-6-1:2017
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
35.040.99 Drugi standardi v zvezi s Other standards related to
kodiranjem informacij information coding
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST EN 62056-6-1:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62056-6-1:2018

---------------------- Page: 2 ----------------------

SIST EN 62056-6-1:2018


EUROPEAN STANDARD EN 62056-6-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2017
ICS 35.110; 17.220; 91.140.50 Supersedes EN 62056-6-1:2016
English Version
Electricity metering data exchange - The DLMS/COSEM suite -
Part 6-1: Object Identification System (OBIS)
(IEC 62056-6-1:2017)
Échange des données de comptage de l'électricité - La Datenkommunikation der elektrischen Energiemessung -
suite DLMS/COSEM - Partie 6-1: Système d'identification DLMS/COSEM - Teil 6-1: COSEM Object Identification
des objets (OBIS) System (OBIS)
(IEC 62056-6-1:2017) (IEC 62056-6-1:2017)
This European Standard was approved by CENELEC on 2017-09-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62056-6-1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62056-6-1:2018
EN 62056-6-1:2017 (E)

European foreword
The text of document 13/1745/FDIS, future edition 3 of IEC 62056-6-1, prepared by
IEC/TC 13 "Electrical energy measurement and control" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62056-6-1:2017.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-06-13
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-09-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62056-6-1:2016.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 62056-6-1:2017 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 62056-6-1:2018
EN 62056-6-1:2017 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition ci
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.