Insulating, sheathing and covering materials for low voltage energy cables -- Part 3: PVC insulating compounds

This part of EN 50363 specifies the requirements for the physical properties of the PVC insulating compounds given in Table 1. The relevant test methods are given in EN 60811 series and EN 50395.

Isolier-, Mantel- und Umhüllungswerkstoffe für Niederspannungskabel und -leitungen -- Teil 3: PVC-Isoliermischungen

Dieser Teil der EN 50363 legt die Anforderungen an PVC Isoliermischungen fest, die in Tabelle 1 aufgeführt sind. Die entsprechenden Prüfverfahren sind in den Normen der Reihe EN 60811 und EN 50395 beschrieben.

Matériaux pour enveloppe isolante, gainage et revêtement pour les câbles d'énergie basse tension -- Partie 3: Mélanges PVC pour enveloppe isolante

La présente partie de la EN 50363 mentionne les prescriptions pour les mélanges en PVC pour enveloppe isolante, donnés dans le Tableau 1. Les méthodes d’essais appropriées sont données dans la série EN 60811 et la EN 50395.

Materiali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih kablov – 3. del: Polivinilkloridne (PVC) mase za izoliranje

General Information

Status
Published
Publication Date
30-Apr-2006
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2006
Due Date
01-May-2006
Completion Date
01-May-2006

Relations

Buy Standard

Standard
EN 50363-3:2006
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 50363-3:2006

STANDARD
maj 2006
Materiali za izoliranje, oplaščenje in prevleke nizkonapetostnih energetskih
kablov – 3. del: Polivinilkloridne (PVC) mase za izoliranje
Insulating, sheathing and covering materials for low voltage energy cables – Part 3:
PVC insulating compounds
ICS 29.035.20; 29.060.20 Referenčna številka
SIST EN 50363-3:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50363-3
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2005

ICS 29.035.20


English version


Insulating, sheathing and covering materials
for low voltage energy cables
Part 3: PVC insulating compounds


Matériaux pour enveloppe isolante, Isolier-, Mantel- und
gainage et revêtement pour les câbles Umhüllungswerkstoffe für
d'énergie basse tension Niederspannungskabel und -leitungen
Partie 3: Mélanges PVC pour enveloppe Teil 3: PVC-Isoliermischungen
isolante






This European Standard was approved by CENELEC on 2005-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50363-3:2005 E

---------------------- Page: 2 ----------------------

EN 50363-3:2005 – 2 –


Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 20, Electric cables.
The text of the draft was submitted to the formal vote and was approved by CENELEC as EN 50363-3
on 2005-11-01.
EN 50363 (in all its parts) supersedes the equivalent information at present in HD 21.1 S4,
HD 21.14 S1, HD 22.1 S4, HD 22.10 S1, HD 22.14 S2 and prHD 21.15 S1. The existing information
in these HDs will be deleted at the next maintenance review.
EN 50363-3 should be read in conjunction with EN 50363-0.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-11-01

---------------------- Page: 3 ----------------------

– 3 – EN 50363-3:2005


Contents

1 Scope.4
2 Normative references.4
3 Definitions.4
4 Properties.4
Table 1 – Types of PVC insulating compound .4
Table 2 – Requirements for the tests for PVC insulating compounds .5

---------------------- Page: 4 ----------------------

EN 50363-3:2005 – 4 –


1 Scope
This part of EN 50363 specifies the requirements for the physical properties of the PV
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.