Aircraft batteries -- Part 3: Product specification and declaration of design and performance (DDP)

This part of EN 60952 defines requirements for the product specification as well as procedures for a Declaration of Design and Performance (DDP) for nickel-cadmium and lead-acid aircraft batteries containing vented or valve-regulated cells or monoblocs. The batteries are used for both general purposes and specific aerospace applications.

Flugzeugbatterien -- Teil 3: Produktspezifikation und Erklärung zu Entwurf und Leistung (DDP)

Batteries d'aéronefs -- Partie 3: Spécification de produit et déclaration de conception et de performance (DDP)

La présente partie de la EN 60952 définit les exigences concernant la spécification de produit ainsi que les procédures en vue d'une déclaration de conception et performance pour les batteries d'aéronefs au nickel-cadmium et au plomb contenant des éléments ou monoblocs de type ouvert ou à soupape. Les batteries sont utilisées tant pour les usages généraux que pour des applications spécifiques aérospatiales.

Letalske baterije – 3. del: Specifikacija za proizvod in pojasnilo k načrtovanju in delovanju

General Information

Status
Withdrawn
Publication Date
30-Apr-2005
Withdrawal Date
15-Aug-2021
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Jul-2021
Due Date
20-Aug-2021
Completion Date
16-Aug-2021

Relations

Buy Standard

Standard
EN 60952-3:2005
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 60952-3:2005

STANDARD
maj 2005
Letalske baterije – 3. del: Specifikacija za proizvod in pojasnilo k načrtovanju
in delovanju
Aircraft batteries -- Part 3: Product specification and declaration of design and
performance (DDP)
ICS 29.220.20; 49.060 Referenčna številka
SIST EN 60952-3:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60952-3
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2004

ICS 29.220.20 ; 49.060 Supersedes EN 60952-3:1995


English version


Aircraft batteries
Part 3: Product specification and declaration of design
and performance (DDP)
(IEC 60952-3:2004)


Batteries d'aéronefs Flugzeugbatterien
Partie 3: Spécification de produit Teil 3: Produktspezifikation und Erklärung
et déclaration de conception zu Entwurf und Leistung (DDP)
et de performance (DDP) (IEC 60952-3:2004)
(CEI 60952-3:2004)






This European Standard was approved by CENELEC on 2004-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60952-3:2004 E

---------------------- Page: 2 ----------------------

EN 60952-3:2004 - 2 -
Foreword
The text of document 21/613/FDIS, future edition 2 of IEC 60952-3, prepared by IEC TC 21,
Secondary cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60952-3 on 2004-11-01.
This European Standard supersedes EN 60952-3:1995.
This standard now details the requirement for defining the declaration of performance and the detail of
a specification between supplier and purchaser.
It is recognised that additional data may be required by other organisations (national standards
bodies, AECMA, SAE, etc.). The present standard can be used as a framework to devise tests for
generation of the required data.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60952-3:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60952-3:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60952-1 2004 Aircraft batteries EN 60952-1 2004
Part 1: General test requirements and
performance levels

ISO/TR 224 1998 Aircraft – Declaration of design and - -
performance for aircraft equipment –
Standard form

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
60952-3
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2004-09
Batteries d'aéronefs –
Partie 3:
Spécification de produit et déclaration
de conception et de performance (DDP)
Aircraft batteries –
Part 3:
Product specification and declaration
of design and performance (DDP)
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
PRICE CODE N
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60952-3 © IEC:2004 – 3 –
CONTENTS
FOREWORD.5
1 Scope.9
2 Normative references.9
3 Terms and definitions .9
4 Product specification.9
4.1 General requirements.9
4.2 Example product secification .11
5 Declaration of design and performance (DDP).11
5.1 Performance.11
5.2 Limitations.11
5.3 Departures from specification .11
5.4 Verification.11
5.5 Authentication.13
5.6 Construction.13
5.7 Definition.13
Annex A (normative) Template for a typical purchaser’s product specification/requirement.15
Annex B (normative) Template for a typical declaration of design and performance.23

---------------------- Page: 6 ----------------------

60952-3 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AIRCRAFT BATTERIES –
Part 3: Product specification and declaration
of design and performance (DDP)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60952-3 has been prepared by IEC technical committee 21:
Secondary cells and batteries.
This second edition cancels and replaces the first edition published in 1993. This new edition
now details the requirement for defining the declaration of performance and the detail of a
specification between supplier and purchaser.
The text of this standard is based on the following documents:
FDIS Report on voting
21/613/FDIS 21/617/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 7 ----------------------

60952-3 © IEC:2004 – 7 –
It is recognised that additional data may be required by other organisations (national standards
bodies, AECMA, SAE etc.).The present standard can be used as a framework to devise tests
for generation of the required data.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
IEC 60952 consists of the following parts, under the general title Aircraft batteries:
Part 1: General test requirements and performance levels
Part 2: Design and construction requirements
1)
Part 3: Product specification and declaration of design and performance (DDP)
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
1)
The second edition of IEC 60952-3 (2004) replaces the first edition published in 1993 under the title: Aircraft
bateries – Part 3: External electrical connectors

---------------------- Page: 8 ----------------------

60952-3 © IEC:2004 – 9 –
AIRCRAFT BATTERIES –
Part 3: Product specification and declaration
of design and performance (DDP)
1 Scope
This part of IEC 60952 defines requirements for the product specification as well as procedures
for a Declaration of Design and Performance (DDP) for nickel-cadmium and lead-acid aircraft
batteries containing vented or valve-regulated cells or monoblocs. The batteries are
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.