SIST EN 14886:2008

Oznaka standarda: SIST EN 14886:2008
Koda projekta: 00145026
Organizacija: SIST
Naslov (angleški): Rubber and plastics machines - Bandknife cutting machines for block foams - Safety requirements
Naslov (slovenski): Stroji za predelavo gume in plastike - Tračni rezalni stroji za peno v bloku - Varnostne zahteve
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 14886:2008 angleški jezik Active SIST-M: 119.79 EUR
PDF
Papir
Tehnični odbor: VSN - Varnost strojev in naprav
ICS: 83.200
Status: Objavljen
Objavljen: 01-jun-2008
Refer. št. objave: Sporočila 2008-06
Referenčna oznaka: EN 14886:2008
Področje projekta (angleško): This draft European standard applies to machines that are designed specifically to cut, split or peel block foams to commercially required shapes, using a single or double cut. All hazards listed in clause 4 are covered by this document. Cutting of the block foams may be by: 3 vertical cutting; 3 horizontal cutting; 3 tilted cutting; 3 transverse cutting; 3 contour cutting; 3 or a combination of the above. The material to be cut may be supported or transported by: 3 a fixed table; 3 a shuttle table; 3 a conveyor; 3 a turntable; 3 rollers; 3 or a combination of the above. Cutting can be either manual or automatic. Cutting tools can be: 3 smooth-edged or toothed bandknives; 3 cutting wires. Movement of the cutting tool can be either oscillating or continuous in one direction. This European Standard does not apply to: 3 laser and water jet cutting; 3 hot wire cutting; 3 wood, metal and food cutting machines. The safety requirements for the additional hazards arising from the interaction between bandknife cutting machines and ancillary equipment, especially loading and unloading devices are specified. The safety requirements for the ancillary equipment itself are not specified. This European Standard covers machines used for cutting plastics and rubber having a cellular or compact structure. However, it may also be applied when these machines are used for cutting other materials, for example textiles and mineral wool, if cutting these materials does not create additional hazards. This document is not applicable to bandknife cutting machines manufactured before the date of publication of this document by CEN .

Najbolje prodajani standardi