Candles - Specification for fire safety

Requirements and test methods for safety relevant parameters during the burning of candles

Kerzen - Spezifikation für Feuersicherheit

Bougies - Spécification relative a la sécurité incendie

La présente norme européenne spécifie les exigences et les méthodes d’essai relatives à la sécurité contre les risques d’incendie des bougies destinées à un usage intérieur.

Sveče - Specifikacije za požarno varnost

General Information

Status
Withdrawn
Publication Date
03-Apr-2008
Withdrawal Date
03-Nov-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
04-Nov-2019
Due Date
27-Nov-2019
Completion Date
04-Nov-2019

Relations

Buy Standard

Standard
EN 15493:2008
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Candles - Specification for fire safetyBougies - Spécification relative a la sécurité incendieKerzen - Spezifikation für FeuersicherheitTa slovenski standard je istoveten z:EN 15493:2007SIST EN 15493:2008en,fr,de97.18013.220.0113.120ICS:SLOVENSKI
STANDARDSIST EN 15493:200801-maj-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15493November 2007ICS 71.100.99 English VersionCandles - Specification for fire safetyBougies - Spécification relative à la sécurité incendieKerzen - Spezifikation für die FeuersicherheitThis European Standard was approved by CEN on 23 September 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15493:2007: E



EN 15493:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Safety requirements.6 4.1 Stability.6 4.2 Secondary ignition.7 4.3 Flame height.7 4.4 Behaviour by self-extinguishing at the end of the burning process.7 4.5 Re-ignition after extinguishing.7 5 Test equipment and apparatus.7 6 Sampling.7 7 Sample preparation.7 8 General test conditions.7 9 Test methods.8 9.1 General.8 9.2 Stability test.8 9.3 Burning test.8 9.4 Flame height.9 10 Test report.9 Bibliography.10



EN 15493:2007 (E) 3 Foreword This document (EN 15493:2007) has been prepared by Technical Committee CEN BT/TF 164 “Candle safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the latest by May 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 15493:2007 (E) 4 Introduction Candles have accompanied mankind for more than 2 000 years serving above all as a light source. Closely connected to the development history of the candle are the efforts made to improve its quality and its safety in use. Discussions in the past and present over possible self-forming, harmful emissions and fires caused by unsafe candles and/or inappropriate use during the burning of candles have led to consumer concern for these issues.
This European Standard helps to ensure a reasonable degree of safety during use, thereby improving personal safety and reducing the risk of fires, deaths and injuries.



EN 15493:2007 (E) 5
1 Scope This European Standard specifies requirements and test methods for the fire safety of candles intended to be burned indoors. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15494:2007, Candles - Candles - Product safety labels 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 base material intended fuel source for candle flame 3.2 burning period time the candle burns from initial being lit until it is extinguished 3.3 burn test cycle total time of a burning period and pause 3.4 candle one or more combustible wicks supported by a material that constitutes a fuel, which is solid, semisolid or quasi-rigid at room temperature (20 °C to 27 °C)
NOTE 1 It can also contain additives, which are used for colour, odour, stability, or to modify the burning characteristics; the combined function of which is to sustain a light-producing flame.
NOTE 2 Including candles with decoration attached to or contained within t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.