Nickel and nickel alloys -- Composition and forms of wrought products

Lists the chemical composition and density of wrought nickel and nickel alloys and commercially available wrought products. Annex A contains a list of ISO methods of analysis. The definitions for nickel and nickel alloys in ISO 6372-1 and for wrought products in ISO 6372-3 apply.

Nickel et alliages de nickel -- Composition chimique et formes des produits corroyés

Nikelj in nikljeve zlitine - Sestava in oblika gnetenih izdelkov

General Information

Status
Withdrawn
Publication Date
31-Jul-1996
Withdrawal Date
22-Jun-2020
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Jun-2020
Due Date
16-Jul-2020
Completion Date
23-Jun-2020

Buy Standard

Standard
ISO 9722:1992 - Nickel and nickel alloys -- Composition and forms of wrought products
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 9722 1996
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 9722:1992 - Nickel et alliages de nickel -- Composition chimique et formes des produits corroyés
French language
8 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 9722:1992 - Nickel et alliages de nickel -- Composition chimique et formes des produits corroyés
French language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL
STANDARD
First edition
1992-11-01
-- --------m-e.---------
Nickel and nicke1 alloys - Composition and
forms of wrought products
Nickel et alliages de rkkel - Composition chimique et formes des
produifs corroyes
Reference number
ISO 9722: 1992(E)

---------------------- Page: 1 ----------------------
ISO 9722:1992(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out tht-ough ISO
technical committees. Esch member body interested in a subject fot
which a technical cornmittee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 9722 was prepared by Technical Committee
ISO/TC 155, Nickel and nicke1 alloys, Sub-Committee SC 2, Wrought and
cast nicke1 and nicke1 alloys.
Annex A forms an integral part of this International Standard.
0 ISO 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organizati on for Standardization
Case Postale 56 + CH-1 21 1 Geneve 20 0 Switzer land
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
ISO 9722:1992(E)
INTERNATIONAL STANDARD
Nickel and nicke1 alloys - Composition and forms of wrought
products
ISO 6372-3:1989, Nickel and nicke/ alloys - Terms
1 Scope
and definifions - Part 3: Wrought producfs and
castings.
This International Standard lists the Chemical com-
Position of wrought nicke1 and nicke1 alloys and the
ISO/TR 7003:1990, Unified format for the designafion
forms of wrought products in which they are com-
of metals.
mercially available.
lSO/TR 9721: -‘1, Nickel and nicke/ alloys - Code of
2 Normative references
designatiorl based on chemical Symbols.
The following Standards contain provisions which,
ISO 9723:1992, Nickel and nicke1 alloy bars.
through reference in ,this text, constitute provisions
of this International Standard. At the time of publi-
ISO 9724:1992, Nickel and nicke/ alloy wire and
cation, the editions indicated were valid. All stan-
drawing stock.
dards are subject to revision, and Parties to
agreements based on this International Standard
ISO 9725:1992, Nickel and nicke/ alloy forgings.
at-e encouraged to investigate the possibility of ap-
plying the rnost recent editions of the Standards in-
3 Definitions
dicated below. Members of IEC and ISO maintain
registers of currently valid International Standards.
For the purposes of this International Standard, the
definitions for nicke1 and nicke1 alloys in ISO 6372-1
ISO 62073992, Seamless nicke/ and nicke/ alioy
and for wrought products in ISO 6372-3 apply.
tube.
4 Alloy identification
ISO 62083992, Nickel and nicke1 alloy plafe, sheet
and sfrip.
For the purposes of this International Standard, the
principles for alloy identification in ISO/TR 7003 and
ISO 6372~1:1989, Nickel and nicke/ alloys - Terms
and definitions -- Part 1: Materials. ISO/TR 9721 apply.
1) 70 be published.
1

---------------------- Page: 3 ----------------------
ISO 9722:1992(E)
shall be calculated by differente
as “remainder”
5 Composition
frorn 100 % .
5.1 The compositions of nicke1 and nicke1 alloys
5.2 For a list of ISO analytical Standards, see an-
are shown in table 1.
nex A.
The composition limits do not preclude the possible
presence of other elements that are no1 specified. If 6 Forms of wrought products
the purchaser’s requirements necessitate limits for
any other element that is not specified, these shall The forms of wrought products in which nicke1 and
be agreed upon between the purchaser and the nicke1 alloys are available are indicated in table 2
supplier. The percentage content of elements shown by an “X” in the appropriate column.

---------------------- Page: 4 ----------------------
i
% DensityJ)
Alloy identificationl)
I 1 1 I Coyposition (ni/m)2) 1
Number Description Al P Otherss)
B C Co4) I Cr Cu Fe ( Mn Mo Ni s
g/cm3
I
l
' i
/ j
i f !
I
1
I
NW2200 i Ni99,O / i 99,o 8,Q
0.15 I 02 l 034 1 0,3 0,010 0,3 1
l
,
i
I / t I
' NW2201 1 Ni99,0-LC
i ’ 99,o 1 819
02 ! 084 i 0,3 0,010 0,3 I
, ]
/ i
1 !
1
NW3021 i NiCo20Cr15Mo5A14Ti ! 4,5 0,003 0,12 i 18,O 14,0 i 415 Remainder 099 Ag: 0,0005(5j 814
0,010 0,17 22,0 15,7 0,2 14 1,o 5,5 0,015 1:o 1,5 Bi: O,OOOl(l)
419
/
Pb: 0,0015(15)
i
l l
i
i 1 !
NW7263 ’ NiCo20020Mo5Ti2AI i 0,3
Ag: 0,0005(5) 8.4
Bi: O,OOOl(l)
0,6
l
Pb: 0,0020(20)
l
!
NW700 1 NiCr20Co13Mo4Ti3Ai 1,2
i,6
i l
1 NW7090 1 NiCr20Co18Ti3 i 1.0
I
NW66 17 1 NiCr22Co12Mo9
1 033
NW7750 NiCrl5Fe7Ti2AI ' 0.4 ’ Nb+Ta: 0,7 to 1,2
130
!
/ ! t
Ni01 5Fe8
I
I
I
f NW6602 1 NiCrl5F&-LC 8.4
1
1 I
to
' NbtTa: 4,7 5,5 810
0,006 0,08
0,010 0,15 2,5
NiCr22Fe20Mo6Cu2Nb i Remarnder '
’ NiCr22Fe20Mo7Cu2 TP
I i I
l
NW660 1 ' NiCr23Fe 15AI I
1:O 21,o 5830 1 870
l
0:lO 25.0 1,O Remai nder 1 ,O 6380 1 0,015 0,5
L7
1
i
1 ;“:;; 1 ::::““““‘“o”” 1 ’ 2S 24,0 2.5
OJO 4,0
! 82
w

---------------------- Page: 5 ----------------------
l
All y identificationl!
I 1 Density3)
i l
Fe 1 Mz”r:rr % ‘l;m’2’ p / s j si i Ti w /
Number
1 Descri ption 3 i 1 c 1 Co4 Cr 1 Cu i g,cm3
1
OthersS)
I
i
I I
I !
NW6455 1 NiCrl6Mol6Ti I
l4,O Remainder
1 IA’ j 3.0 Ii 1 i 1 I 8,6
i W 17,o 1 0,040 0,030 0,08 0,7
i
I
NW6022 / NiCr21Mo13Fe4W3 J
1 I 1
1 20,o 290 12,s Remainder I 2,5 V: 0,35 8,7
l
I l
NW6625 ’
NiCr22MoSNb
1 1 j ] wo 1 1 1 20,o
j 0,015 0.10 2,5 1,O 1 l 1 23,0 22,5 j ! i l l ’ 5,0 WJ / IIo ’ ~8~~~ 1 ~~~~~ 1 ~~~~~ / ~~~~ 1 o,40 1 3’5 1 3,15 to 4,15 ’ $5
i 58,O I Nb-+-Ta:

J / ’ /
1 / I Remainder ! 0,20
1 I
,
NW6621
NiCr20Ti l
Pb: 0,0050(50)
8,4
E 1 5,0 :::o 0,5 5.0
1,o
0,020 1,o 0,60
1 1 ! I
NW7080 I NiCr20Ti2A’
1 1 1 1 ’ 1 ’ I 1
Remainder { 1!,8’ i
Ag: 0,0005(5) 82
1
i:a 1 0,008 i:y: 2,0 :1:: 0,2 1 1,5 1,O 0,015 1,0 2,7 I 1
8i: O,OOOl(l)
Pb: 0.0020(20)
I
i 1 I
1
l
NW4400 ! NiCu30 i I
28,0 I
i 1 I 0,30 I I 34,0 2.5 zo 63,0 l 0.025 0,5 l l 818
1
,) !! 11: : i 1 ‘1
!
i
1 r
1
NW4402 NiCu30-LC
w3
l I
i l 1 0,04 1 1 1 ::fi 1 2,5 1 2,0 / 1 63qo 1 0,025 ’ 0.5
12.21 J ! I i I 27,O 1 1
1 !
NW5500 NiCu30Al3Ti
Remai nder
1 3!2 1 j 0,25 l 1 ’ / 34,0 zo 195 0,020 0.015 0.3 0,35 l 8,5
l 1 0,85
l
I I
f
! ;
NW8825 2,5 38,0 ’ 1
NiFe30Cr21Mo3
i ’ Remar nder
0.2 On05 23,5 I 1 0,6 I 311
1 /
l
1 , ! i I 1 i $0 l,o 3,5 46,0 0,015 0,5 , 1,2
i lQz5 lt5
NW99 11 ’ NiFe36Crl2Mo6Ti3 ’ f ( ’ ’ 1 i /
1 ! !
I 0.35 0,010 0,02 i 1,o f Remai nder 5,0 40,o 2,8 ! 82
0,020 0,06 1 14,0 0,2
0,5 6.5 45,o 0,020 0.020
0,4 3,l
J 1 J
1 I
i
I
NW0276 ’
i 14,5 j
1 NiMolGCrlSFe6W4 1 i I I l 0,010 i 2,5 16,5 i I 1 7,O 4,O 1 lt0 1 i / 15!0 17,0 1 1 1 Remainder 0,040 0,030 1 i I 0.08 l 370 415 83
1
1 l l
i
I
NW0665
NiMo28 I l 1 1 l /
26,0 Remainder
92
/ l
1 / / i l 1 / j o,05 0.02 1
...

SLOVENSKI STANDARD
SIST ISO 9722:1996
01-avgust-1996
Nikelj in nikljeve zlitine - Sestava in oblika gnetenih izdelkov
Nickel and nickel alloys -- Composition and forms of wrought products
Nickel et alliages de nickel -- Composition chimique et formes des produits corroyés
Ta slovenski standard je istoveten z: ISO 9722:1992
ICS:
77.150.40 Nikljevi in kromovi izdelki Nickel and chromium
products
SIST ISO 9722:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 9722:1996

---------------------- Page: 2 ----------------------

SIST ISO 9722:1996
INTERNATIONAL
STANDARD
First edition
1992-11-01
-- --------m-e.---------
Nickel and nicke1 alloys - Composition and
forms of wrought products
Nickel et alliages de rkkel - Composition chimique et formes des
produifs corroyes
Reference number
ISO 9722: 1992(E)

---------------------- Page: 3 ----------------------

SIST ISO 9722:1996
ISO 9722:1992(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out tht-ough ISO
technical committees. Esch member body interested in a subject fot
which a technical cornmittee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 9722 was prepared by Technical Committee
ISO/TC 155, Nickel and nicke1 alloys, Sub-Committee SC 2, Wrought and
cast nicke1 and nicke1 alloys.
Annex A forms an integral part of this International Standard.
0 ISO 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
International Organizati on for Standardization
Case Postale 56 + CH-1 21 1 Geneve 20 0 Switzer land
Printed in Switzerland
ii

---------------------- Page: 4 ----------------------

SIST ISO 9722:1996
ISO 9722:1992(E)
INTERNATIONAL STANDARD
Nickel and nicke1 alloys - Composition and forms of wrought
products
ISO 6372-3:1989, Nickel and nicke/ alloys - Terms
1 Scope
and definifions - Part 3: Wrought producfs and
castings.
This International Standard lists the Chemical com-
Position of wrought nicke1 and nicke1 alloys and the
ISO/TR 7003:1990, Unified format for the designafion
forms of wrought products in which they are com-
of metals.
mercially available.
lSO/TR 9721: -‘1, Nickel and nicke/ alloys - Code of
2 Normative references
designatiorl based on chemical Symbols.
The following Standards contain provisions which,
ISO 9723:1992, Nickel and nicke1 alloy bars.
through reference in ,this text, constitute provisions
of this International Standard. At the time of publi-
ISO 9724:1992, Nickel and nicke/ alloy wire and
cation, the editions indicated were valid. All stan-
drawing stock.
dards are subject to revision, and Parties to
agreements based on this International Standard
ISO 9725:1992, Nickel and nicke/ alloy forgings.
at-e encouraged to investigate the possibility of ap-
plying the rnost recent editions of the Standards in-
3 Definitions
dicated below. Members of IEC and ISO maintain
registers of currently valid International Standards.
For the purposes of this International Standard, the
definitions for nicke1 and nicke1 alloys in ISO 6372-1
ISO 62073992, Seamless nicke/ and nicke/ alioy
and for wrought products in ISO 6372-3 apply.
tube.
4 Alloy identification
ISO 62083992, Nickel and nicke1 alloy plafe, sheet
and sfrip.
For the purposes of this International Standard, the
principles for alloy identification in ISO/TR 7003 and
ISO 6372~1:1989, Nickel and nicke/ alloys - Terms
and definitions -- Part 1: Materials. ISO/TR 9721 apply.
1) 70 be published.
1

---------------------- Page: 5 ----------------------

SIST ISO 9722:1996
ISO 9722:1992(E)
shall be calculated by differente
as “remainder”
5 Composition
frorn 100 % .
5.1 The compositions of nicke1 and nicke1 alloys
5.2 For a list of ISO analytical Standards, see an-
are shown in table 1.
nex A.
The composition limits do not preclude the possible
presence of other elements that are no1 specified. If 6 Forms of wrought products
the purchaser’s requirements necessitate limits for
any other element that is not specified, these shall The forms of wrought products in which nicke1 and
be agreed upon between the purchaser and the nicke1 alloys are available are indicated in table 2
supplier. The percentage content of elements shown by an “X” in the appropriate column.

---------------------- Page: 6 ----------------------

SIST ISO 9722:1996

---------------------- Page: 7 ----------------------

SIST ISO 9722:1996

---------------------- Page: 8 ----------------------

SIST ISO 9722:1996

---------------------- Page: 9 ----------------------

SIST ISO 9722:1996
ISO 9722:1992(E)
...

ISO
NORME
9722
INTERNATIONALE
Première édition
1992-l l-01
Nickel et alliages de nickel - Composition
chimique et formes des produits corroyés
Nickel and nickel alloys -- Composition and forms of wrought products
Num&o de référence
ISO 9722: 1992(F)

---------------------- Page: 1 ----------------------
ISO 9722:1992(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec USO participent également aux tra-
vaux. L’ISO coHabore étroitement avec la Comrnission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 9722 a été élaborée par le comité techni-
que ISO/TC 155, Nickel et alliages de nickel, sous-comité SC 2, Nickel
et alliages de nickel corroyés et moulés.
L’annexe A fait partie intégrante de la présente Norme internationale.
0 ISO 1992
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation international e de norrnalisation
Case Postale 56 l CH-121 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 9722:1992(F)
Nickel et alliages de nickel - Composition chimique et formes
des produits corroyés
ISO 6372.3:1989, Nickel et alliages de nickel - Ter-
3 Domaine d’application
mes et définitions - Partie 3: Produits corroyés et
produits moulés.
La présente Norme internationale prescrit la com-
position chimique des nickel et alliages de nickel
ISO/TR 7003:1990, Format unillé pour la désignation
les formes des produils
corroyés, et indique
des métaux.
corroyés couramment disponibles dans le com-
merce.
ISO/TR 9721: -A Nickel et alliages de nickel - Règles
pour la descripiion de matériaux basée sur les sym-
boles chimiques.
2 Références normatives
ISO 9723:1992, Barres en nickel et alliages de
nickel.
Les normes suivantes contiennent des dispositions
qui, par suite de la référence qui en est faite,
ISO 9724:1992, Fil et fil-machine en nickel et alliages
constituent des dispositions valables pour la pré-
de nickel.
sente Norme in.lernationaIe. Au moment de la pu-
blication, les éditions indiquées étaient en vigueur.
ISO 9725:1992, Pièces forgées en nickel et alliages
Toute norme est sujette à révision et les parties
de nickel.
prenantes des accords fondés sur la présente
Norme internationale sont invitées à rechercher la
3 Définitions
possibilité d’appliquer les éditions les plus récentes
des normes indiquées ci-après. Les membres de la
Pour les besoins de la présente Norme internatio-
CEI et de I’ISO possèdent le registre des Normes
nale, les définitions données dans I’ISO 6372-l pour
internationales en vigueur à un moment donné.
le nickel et les alliages de nickel et I’ISO 6372-3 pour
les produits corroyés s’appliquent.
ISO 6207:1992, Tubes sans soudure en nickel et al-
liages de nickel.
4 Identification des alliages
ISO 6208:1992, Plaques, tôles et bandes en nickel et
Pour les besoins de la présente Norme internatio-
alliages de nickel.
nale, les principes d’identification des alliages don-
nés dans I’ISO/TR 7003 et I’ISO/TR 9721
ISO 6372-1:1989, Nickel et alliages de nickel -- Ter-
mes et définitions - Partie 1: #atériaux. s’appliquent.
P-B
1) À publier.
1

---------------------- Page: 3 ----------------------
ISO 9722:1992(F)
4e rest ebt doit être normalement calculé, par diffé-
5 Composition
rente p ar rapport à 100 %.
5.1 Les compositions chimique S des nickel et al-
5.2 Pour les méthodes d’analyse, voir l’annexe A.
liages de nickel sont do nnées au t ablea u 1.
Les limites de composition ne préjugent pas de la
6 Formes des produits corroyés
présence éventuelle d’autres éléments non spéci-
fié:. Si les exigences de l’acheteur nécessitent des
Les formes des produits corroyés dans lesquels les
teneurs limites pour d’autres éléments non spéci-
fiés, ces teneurs doivent faire l’objet d’un accord nickel et alliages de nickel existent sont indiquées
entre l’acheteur et le fournisseur. Le pourcentage au tableau 2 et désignées par t(X)> dans les colonnes
de la teneur des éléments indiqués par l’expression appropriées.
2

---------------------- Page: 4 ----------------------
Masse
Ide&ication des alliagesI) Composition % (mi’m)2)
/ , volumiqueJ1
I I
1
Numéro Descti ption Al 8 I c I CO4 1 Cr CU Fe W Autre&)
I g/cm3
I I
0””
i
NW2200 Ni99,O a,9
0,15 ”
0,2 0$4 1
t
NW2201 Ni99,0-LC
49
l
0,02 0,2 O,4 +
1 1
I x
I
NiCo20CrlSMoSAi4Ti 0,003 1 0,12 1 ia,o 1 14,o Ag: O,OOO5(5)
0,9 a,4
f)
0,2 1,o 0,015 ?,O 1,5 Bi: 0,0001(1)
0
Pb: 0,0015(15) 3
-r
i .
1 NW7263 1 NiCo2OCr20Mo5Ti2Ai 1 0,3 Reste' Ag: Ag: O,OOO5(5) O,OOO5(5)
5,6 84 v,
-.
0,005 0,08 21,0 21,o 0,2 O,? 0,6 6,l Bi: Bi: O,OOOl(l) O,OOOl(l)
P P b: b: 0,0020(20) 0,0020(20)
Ti+Al: Ti+Al: 2,4 2,4 à à 2,8 2,8
n
j ! iny
=r
NW7001 i NiCr2OCo13Mo4Ti3Ai 1,2 0,003 l 0,02 12,0 18,O Ag: Ag: 0,0005(5) 0,0005(5) a,4 3
238
Bi: Bi: 0,0005(0,5) 0,0005(0,5) -.
0,010 0'10 15,o 21,O OJO 2,0 0,015 0,l 3,3
1'6
Pb: Pb: 0,0010(10) 0,0010(10)
Zr: Zr: 0,02 0,02 à à 0,08 0,08
l--l-
i
NW7090 NiCr20ColaTi3
Reste' I i 2,0 Zr: 0,15 82
f 110
1- I I
/
0,2 1,5 0,015 1'0 3,0
290
I
NW6617 ’ NiCr22Col2Mo9
018
1 ,. i i$i / Resrei 0,015 1,0 0,6
0,5 13,o
c5
i
NW7750 ' NiCr'lSFe7Ti2AI / 0,oa l 17,0 14,0 Nb+Ta: 0,7 à 1,2
5,O 22
0'4
0,5 9,o 0,015 0,5 2,a
110
I l i
14,0 6:O
0,15 17:o 0,5 10,o
1 1
l 0,02 / 17,o 14,o
690 84
10,o 1,0 1 1 72,0 1 J-J--
0'5
NiCrl9Fel9Nb5Mo3 0,2 278 50,o - Nb+Ta: 4,7 à 5,5
096
8’0
o!a 0,006 / 0,08 / 1 ;;; 033 Reste 0,4 3,3 55,o 0,015 0,015 0,4 , 1,2
1
1
I l
NW6002 NiCr21 FelaMo9 17,0 870 Reste
0,2 42
1
/
20,o 110 10.0 0,040 0:030 1,o 1'0
/ /
1 I
NW6007 NiCr22Fe20Mo6Cu2Nb 1,5 I a,0 1,o 5,5 Reste
1,7 à 2,5 83
Nb+Ta:
2,0 7,5 0,040 0,030 1,o
1
I l
/ l
1
NW6985 NiCr22Fe20Mo7Cu2 ! 6,0 1 Reste Nb+Ta: 0,5 .
83
i I
A,5
NW6601 NiCr23Fel5Ai ] 1,o
1,7
I 1. I

---------------------- Page: 5 ----------------------
Masse
Identification des alliagesl) Composition % (m/m)2)
voiumique3)
I
l
Numéro Descrî ption Cr CU / Fe / Mn 1 Mo / Ni 1 P 1 S Si Ti W AutresS)
Al / B 1 C / cd
g/cm3
I
1
295 1
NW6333 NiCr26Fe20Co3Mo3W3
0,030
1 OJO / ::o 0,030
195 40
NW6690 ’ NiCr29Fe9
82
0,015
035
I
NW64.55 NiCrlGMolBTi 14,o 14,O i Reste
816
0,7 I I
0,08
l
17,0 0,040 0,030
18,O 3,0 1,o
1
l
NW6022 ! Ni021 Mo13Fe4W3 230 12,5 Reste
20,o
i 2,5 V: 0,35 817
0:020
1 0,015 j 2,5 22,5 6,0 0,5 14,5 f 0,025
0,08 395
I
l
I
NW6625 ’ NiCr22MoSNb 830 58,0 Nb+Ta: 3,15 à
20,o 4,15 ’ 8,5
l 0,40 0,lO 1:o 0,015 0,015 0,50 0,40
23,0 1 5!0 0,50 10,o
f !
I
NW6621 NiCr20Ti 0,OB Reste
18,O ’ 1
0,20 P b: 0,0050(50) 84
0,s 5,o 0,020 0,60
21 ,o l 0,5 1 5,o / ?,O 110
I 1
I
1 1 ! ! 1
1
NW7080 j NiCr20Ti2Al 1 Reste
198 Ag: 0,0005(5) 1 52
I
0,015 1,O 2,7 Bi: 0,0001(1)
I Pb: 0,0020(20)
NW4400 i NiCu30 i 28,O / ’ 1 63,
...

ISO
NORME
9722
INTERNATIONALE
Première édition
1992-l l-01
Nickel et alliages de nickel - Composition
chimique et formes des produits corroyés
Nickel and nickel alloys -- Composition and forms of wrought products
Num&o de référence
ISO 9722: 1992(F)

---------------------- Page: 1 ----------------------
ISO 9722:1992(F)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec USO participent également aux tra-
vaux. L’ISO coHabore étroitement avec la Comrnission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 9722 a été élaborée par le comité techni-
que ISO/TC 155, Nickel et alliages de nickel, sous-comité SC 2, Nickel
et alliages de nickel corroyés et moulés.
L’annexe A fait partie intégrante de la présente Norme internationale.
0 ISO 1992
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation international e de norrnalisation
Case Postale 56 l CH-121 Genève 20 l Suisse
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 9722:1992(F)
Nickel et alliages de nickel - Composition chimique et formes
des produits corroyés
ISO 6372.3:1989, Nickel et alliages de nickel - Ter-
3 Domaine d’application
mes et définitions - Partie 3: Produits corroyés et
produits moulés.
La présente Norme internationale prescrit la com-
position chimique des nickel et alliages de nickel
ISO/TR 7003:1990, Format unillé pour la désignation
les formes des produils
corroyés, et indique
des métaux.
corroyés couramment disponibles dans le com-
merce.
ISO/TR 9721: -A Nickel et alliages de nickel - Règles
pour la descripiion de matériaux basée sur les sym-
boles chimiques.
2 Références normatives
ISO 9723:1992, Barres en nickel et alliages de
nickel.
Les normes suivantes contiennent des dispositions
qui, par suite de la référence qui en est faite,
ISO 9724:1992, Fil et fil-machine en nickel et alliages
constituent des dispositions valables pour la pré-
de nickel.
sente Norme in.lernationaIe. Au moment de la pu-
blication, les éditions indiquées étaient en vigueur.
ISO 9725:1992, Pièces forgées en nickel et alliages
Toute norme est sujette à révision et les parties
de nickel.
prenantes des accords fondés sur la présente
Norme internationale sont invitées à rechercher la
3 Définitions
possibilité d’appliquer les éditions les plus récentes
des normes indiquées ci-après. Les membres de la
Pour les besoins de la présente Norme internatio-
CEI et de I’ISO possèdent le registre des Normes
nale, les définitions données dans I’ISO 6372-l pour
internationales en vigueur à un moment donné.
le nickel et les alliages de nickel et I’ISO 6372-3 pour
les produits corroyés s’appliquent.
ISO 6207:1992, Tubes sans soudure en nickel et al-
liages de nickel.
4 Identification des alliages
ISO 6208:1992, Plaques, tôles et bandes en nickel et
Pour les besoins de la présente Norme internatio-
alliages de nickel.
nale, les principes d’identification des alliages don-
nés dans I’ISO/TR 7003 et I’ISO/TR 9721
ISO 6372-1:1989, Nickel et alliages de nickel -- Ter-
mes et définitions - Partie 1: #atériaux. s’appliquent.
P-B
1) À publier.
1

---------------------- Page: 3 ----------------------
ISO 9722:1992(F)
4e rest ebt doit être normalement calculé, par diffé-
5 Composition
rente p ar rapport à 100 %.
5.1 Les compositions chimique S des nickel et al-
5.2 Pour les méthodes d’analyse, voir l’annexe A.
liages de nickel sont do nnées au t ablea u 1.
Les limites de composition ne préjugent pas de la
6 Formes des produits corroyés
présence éventuelle d’autres éléments non spéci-
fié:. Si les exigences de l’acheteur nécessitent des
Les formes des produits corroyés dans lesquels les
teneurs limites pour d’autres éléments non spéci-
fiés, ces teneurs doivent faire l’objet d’un accord nickel et alliages de nickel existent sont indiquées
entre l’acheteur et le fournisseur. Le pourcentage au tableau 2 et désignées par t(X)> dans les colonnes
de la teneur des éléments indiqués par l’expression appropriées.
2

---------------------- Page: 4 ----------------------
Masse
Ide&ication des alliagesI) Composition % (mi’m)2)
/ , volumiqueJ1
I I
1
Numéro Descti ption Al 8 I c I CO4 1 Cr CU Fe W Autre&)
I g/cm3
I I
0””
i
NW2200 Ni99,O a,9
0,15 ”
0,2 0$4 1
t
NW2201 Ni99,0-LC
49
l
0,02 0,2 O,4 +
1 1
I x
I
NiCo20CrlSMoSAi4Ti 0,003 1 0,12 1 ia,o 1 14,o Ag: O,OOO5(5)
0,9 a,4
f)
0,2 1,o 0,015 ?,O 1,5 Bi: 0,0001(1)
0
Pb: 0,0015(15) 3
-r
i .
1 NW7263 1 NiCo2OCr20Mo5Ti2Ai 1 0,3 Reste' Ag: Ag: O,OOO5(5) O,OOO5(5)
5,6 84 v,
-.
0,005 0,08 21,0 21,o 0,2 O,? 0,6 6,l Bi: Bi: O,OOOl(l) O,OOOl(l)
P P b: b: 0,0020(20) 0,0020(20)
Ti+Al: Ti+Al: 2,4 2,4 à à 2,8 2,8
n
j ! iny
=r
NW7001 i NiCr2OCo13Mo4Ti3Ai 1,2 0,003 l 0,02 12,0 18,O Ag: Ag: 0,0005(5) 0,0005(5) a,4 3
238
Bi: Bi: 0,0005(0,5) 0,0005(0,5) -.
0,010 0'10 15,o 21,O OJO 2,0 0,015 0,l 3,3
1'6
Pb: Pb: 0,0010(10) 0,0010(10)
Zr: Zr: 0,02 0,02 à à 0,08 0,08
l--l-
i
NW7090 NiCr20ColaTi3
Reste' I i 2,0 Zr: 0,15 82
f 110
1- I I
/
0,2 1,5 0,015 1'0 3,0
290
I
NW6617 ’ NiCr22Col2Mo9
018
1 ,. i i$i / Resrei 0,015 1,0 0,6
0,5 13,o
c5
i
NW7750 ' NiCr'lSFe7Ti2AI / 0,oa l 17,0 14,0 Nb+Ta: 0,7 à 1,2
5,O 22
0'4
0,5 9,o 0,015 0,5 2,a
110
I l i
14,0 6:O
0,15 17:o 0,5 10,o
1 1
l 0,02 / 17,o 14,o
690 84
10,o 1,0 1 1 72,0 1 J-J--
0'5
NiCrl9Fel9Nb5Mo3 0,2 278 50,o - Nb+Ta: 4,7 à 5,5
096
8’0
o!a 0,006 / 0,08 / 1 ;;; 033 Reste 0,4 3,3 55,o 0,015 0,015 0,4 , 1,2
1
1
I l
NW6002 NiCr21 FelaMo9 17,0 870 Reste
0,2 42
1
/
20,o 110 10.0 0,040 0:030 1,o 1'0
/ /
1 I
NW6007 NiCr22Fe20Mo6Cu2Nb 1,5 I a,0 1,o 5,5 Reste
1,7 à 2,5 83
Nb+Ta:
2,0 7,5 0,040 0,030 1,o
1
I l
/ l
1
NW6985 NiCr22Fe20Mo7Cu2 ! 6,0 1 Reste Nb+Ta: 0,5 .
83
i I
A,5
NW6601 NiCr23Fel5Ai ] 1,o
1,7
I 1. I

---------------------- Page: 5 ----------------------
Masse
Identification des alliagesl) Composition % (m/m)2)
voiumique3)
I
l
Numéro Descrî ption Cr CU / Fe / Mn 1 Mo / Ni 1 P 1 S Si Ti W AutresS)
Al / B 1 C / cd
g/cm3
I
1
295 1
NW6333 NiCr26Fe20Co3Mo3W3
0,030
1 OJO / ::o 0,030
195 40
NW6690 ’ NiCr29Fe9
82
0,015
035
I
NW64.55 NiCrlGMolBTi 14,o 14,O i Reste
816
0,7 I I
0,08
l
17,0 0,040 0,030
18,O 3,0 1,o
1
l
NW6022 ! Ni021 Mo13Fe4W3 230 12,5 Reste
20,o
i 2,5 V: 0,35 817
0:020
1 0,015 j 2,5 22,5 6,0 0,5 14,5 f 0,025
0,08 395
I
l
I
NW6625 ’ NiCr22MoSNb 830 58,0 Nb+Ta: 3,15 à
20,o 4,15 ’ 8,5
l 0,40 0,lO 1:o 0,015 0,015 0,50 0,40
23,0 1 5!0 0,50 10,o
f !
I
NW6621 NiCr20Ti 0,OB Reste
18,O ’ 1
0,20 P b: 0,0050(50) 84
0,s 5,o 0,020 0,60
21 ,o l 0,5 1 5,o / ?,O 110
I 1
I
1 1 ! ! 1
1
NW7080 j NiCr20Ti2Al 1 Reste
198 Ag: 0,0005(5) 1 52
I
0,015 1,O 2,7 Bi: 0,0001(1)
I Pb: 0,0020(20)
NW4400 i NiCu30 i 28,O / ’ 1 63,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.