Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system

This European Standard specifies the designations, nominal duty point and main dimensions of heavy duty side channel pumps with a nominal pressure of 40 bar. NOTE: Depending on special circumstances e.g. temperature, materials, sealing ofthe shaft etc., excess operating pressure need not attain the value of the nominal pressure under any circumstances.

Seitenkanalpumpen PN 40 - Nennleistung, Hauptmaße, Bezeichnungssystem

Diese Norm legt die Bezeichnung, die Nennleistung und Hauptmaße für Seitenkanalpumpen für schwere Anforderungen mit Nenndruck PN 40 fest. ANMERKUNG: Bedingt durch besondere Gegebenheiten, z.B. Temperatur, Werkstoff, Wellendichtung, muß der zulässige Betriebsüberdruck nicht in jedem Fall den Nenndruck erreichen.

Pompes a canal latéral PN 40 - Point de fonctionnement nominal, dimensions principales, systeme de désignation

La présente norme européenne prescrit les désignations, les points nominaux de fonctionnement et les dimensions principales des pompes a canal latéral de service sévere, de pression nominale 40 bar. NOTE: Sous réserve de conditions particulieres, et notamment température, matériaux, étanchéité de l'arbre etc., la pression relative de service admissible ne peut en aucun cas atteindre la pression nominale.

Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system

General Information

Status
Published
Publication Date
30-Nov-2000
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000

Buy Standard

Standard
EN 734:2000
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 734:2000
01-december-2000
Side channel pumps PN 40 - Nominal duty point, main dimensions, designation
system
Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system
Seitenkanalpumpen PN 40 - Nennleistung, Hauptmaße, Bezeichnungssystem
Pompes a canal latéral PN 40 - Point de fonctionnement nominal, dimensions
principales, systeme de désignation
Ta slovenski standard je istoveten z: EN 734:1995
ICS:
23.080 ýUSDONH Pumps
SIST EN 734:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.