Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods

This Technical Specification defines general specifications and performance criteria of other solid and liquid de-icing agents than chlorides of sodium, calcium and magnesium, hereinafter referred to products, for the use in winter service on roads and on roads for specific uses, with the exception of runways and parking areas of aircrafts. It establishes the test methods to control them. The products include inorganic and organic de-icing agents, and mixtures of chlorides of sodium, calcium, magnesium and potassium with organic and inorganic components which are intended for special properties like inhibition of corrosion, enhanced melting capacity or improved spreading pattern.
NOTE   This Technical Specification defines specifications and performance criteria and offers for each a variation in the form of classes of requirements. This does not mean that there are products likely to respond to all the classes and criteria of the standard. Therefore, when defining the demand the user needs to make sure prior the appropriateness of his choice and the availability of suitable products.

Winterdienstausrüstung und Produkte - Enteisungsmittel - Teil 3: Andere feste und flüssige Enteisungsmittel - Anforderungen und Prüfverfahren

Diese technische Spezifikation legt allgemeine Spezifikationen und Leistungskriterien für andere feste und flüssige auftauende Streustoffe als Natrium-, Calcium- und Magnesiumchlorid fest, nachfolgend bezeichnet als Produkte für die Verwendung im Winterdienst auf Straßen und auf Straßen für spezifische Anwendungen, mit Ausnahme von Start- und Landebahnen sowie Abstellplätzen für Flugzeuge. Sie legt die Prüfverfahren zur Kontrolle dieser Leistungskriterien fest. Zu den Produkten gehören auftauende Streustoffe und Gemische aus Natrium-, Calcium-, Magnesium- und Kaliumchlorid mit organischen und anorganischen Bestandteilen, die für besondere Eigenschaften vorgesehen sind, z. B. Korrosionsschutz, gesteigerte Tauleistung oder verbessertes Streubild.
ANMERKUNG   Diese Norm definiert Spezifikationen und Leistungskriterien und bietet für jedes Kriterium eine Variation in Form von Anforderungsklassen. Das bedeutet nicht, dass es Produkte gibt, die auf alle Klassen und Kriterien der Norm zutreffen. Daher muss sich der Anwender bei der Festlegung der Anforderungen im Voraus über die Angemessenheit seiner Auswahl und über die Verfügbarkeit geeigneter Produkte vergewissern.

Équipements de viabilité hivernale - Agents de dégivrage - Partie 3: Autres agents de dégivrage solides et liquides - Exigences et méthodes d'essai

Oprema in proizvodi za zimska vzdrževalna dela - Sredstva za odtajanje - 3. del: Druga trdna in tekoča sredstva za odtajanje - Zahteve in preskusne metode

Ta tehnična specifikacija določa splošne specifikacije in merila učinkovitosti drugih trdnih in tekočih sredstev za odtajanje, ki niso kloridi natrija, kalcija in magnezija (v nadaljnjem besedilu: izdelki), ki se uporabljajo za zimska vzdrževalna dela na cestah in na cestah za posebno uporabo, razen vzletno-pristajalnih stez in parkirišč za letala. Določa preskusne metode za njihov nadzor. Izdelki vključujejo anorganska in organska sredstva za odtajanje ter mešanice kloridov natrija, kalcija, magnezija in kalija z organskimi in anorganskimi sestavinami, ki imajo posebne lastnosti, kot je zaviranje korozije, večja zmogljivost taljenja ali boljši vzorec širjenja.
OPOMBA: Ta tehnična specifikacija določa specifikacije in merila učinkovitosti ter za posamezne izdelke vsebuje različice v obliki razredov zahtev. To ne pomeni, da izdelki ustrezajo vsem razredom in merilom v standardu. Zato mora uporabnik pri opredelitvi povpraševanja najprej preveriti, ali je njegova izbira primerna in ali so na voljo primerni izdelki.

General Information

Status
Published
Public Enquiry End Date
27-Feb-2015
Publication Date
13-Dec-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Nov-2015
Due Date
22-Jan-2016
Completion Date
14-Dec-2015

Buy Standard

Technical specification
TS CEN/TS 16811-3:2016
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16811-3:2016
01-januar-2016
2SUHPDLQSURL]YRGL]D]LPVNDY]GUåHYDOQDGHOD6UHGVWYD]DRGWDMDQMHGHO
'UXJDWUGQDLQWHNRþDVUHGVWYD]DRGWDMDQMH=DKWHYHLQSUHVNXVQHPHWRGH
Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid
de-icing agents - Requirements and test methods
Winterdienstausrüstung und Produkte - Enteisungsmittel - Teil 3: Andere feste und
flüssige Enteisungsmittel - Anforderungen und Prüfverfahren
Équipements de viabilité hivernale - Agents de dégivrage - Partie 3: Autres agents de
dégivrage solides et liquides - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: CEN/TS 16811-3:2015
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
71.100.45 Hladiva in antifrizi Refrigerants and antifreezes
SIST-TS CEN/TS 16811-3:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16811-3:2016

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16811-3:2016


CEN/TS 16811-3
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

October 2015
TECHNISCHE SPEZIFIKATION
ICS 71.100.45; 13.030.40
English Version

Winter maintenance equipment - De-icing agents - Part 3:
Other solid and liquid de-icing agents - Requirements and
test methods
Équipements de viabilité hivernale - Agents de Winterdienstausrüstung - Enteisungsmittel - Teil 3:
dégivrage - Partie 3: Autres agents de dégivrage solides Andere feste und flüssige Enteisungsmittel -
et liquides - Exigences et méthodes d'essai Anforderungen und Prüfmethoden
This Technical Specification (CEN/TS) was approved by CEN on 5 April 2015 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16811-3:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Requirements and test methods . 7
4.1 General . 7
4.2 De-icing performance . 7
4.2.1 General . 7
4.2.2 Nancy-Test . 7
4.2.3 Inzell-Test (informative) . 7
4.2.4 Freezing curve . 8
4.3 Slip resistance . 8
4.4 Heavy metals and hydrocarbons . 9
4.5 pH . 9
4.6 Sulphate . 9
4.7 Corrosiveness . 9
4.8 Flash point . 10
4.9 Biodegradability . 10
4.10 Water insoluble matter . 11
4.11 Kinematic viscosity . 11
4.12 Conductivity . 11
4.13 Bulk density . 11
4.14 Density . 11
4.15 Requirements for additives and mixtures . 11
4.16 Material safety data sheet . 12
4.17 Marking, transport, handling and storage . 12
4.17.1 Labelling of packaged products . 12
4.17.2 Information on delivery notes . 12
4.17.3 Transport, handling and storage . 12
4.18 Public health and environment . 13
4.19 Product description . 13
5 Sampling . 13
Annex A (normative) Product description for other solid and liquid de-icing agents . 14
Annex B (normative) Sampling . 17
Annex C (normative) Test methods . 19
Annex D (informative) Determination of de-icing performance (Inzell-Test) . 32
Annex E (informative) Transport, handling and storage . 35
Annex F (informative) Technical aspects of durability of concrete . 36
Annex G (informative) Test results with the chlorides of sodium, calcium and magnesium . 37
Bibliography . 40

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
European foreword
This document (CEN/TS 16811-3:2015) has been prepared by Technical Committee CEN/TC 337 “Road
operation equipment and products”, the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
Introduction
De-icing agents are important for the winter maintenance of roads and other traffic areas. They can
prevent or eliminate slippery conditions. The Technical Specification describes the requirements for de-
icing agents with different properties from de-icing agents according EN 16811-1 and EN 16811-2, and
which are used for specific services on roads. The testing methods are included in the Technical
Specification.
The multitude of products which can be used in winter maintenance - liquid or solid, natural or
industrial produced substances – requires the defining of performance criteria with which the products
have to comply.
These criteria are used to assess the usability of the de-icing products while taking into consideration all
aspects of the safety of the road user, of the protection of the environment and of the road conditions.
4

---------------------- Page: 6 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
1 Scope
This Technical Specification defines general specifications and performance criteria of other solid and
liquid de-icing agents than chlorides of sodium, calcium and magnesium, hereinafter referred to
products, which are used with their particular properties for specific uses in winter service on roads
and other traffic areas, with the exception of runways and parking areas of aircrafts. It establishes the
test methods to control them. The products include inorganic and organic de-icing agents, and mixtures
of chlorides of sodium, calcium, magnesium and potassium with organic and inorganic components
which are intended for special properties like inhibition of corrosion, enhanced melting capacity or
improved spreading pattern.
NOTE This Technical Specification defines specifications and performance criteria and offers for each a
variation in the form of classes of requirements. This does not mean that there are products likely to respond to all
the classes and criteria of the standard. Therefore, when defining the demand the user needs to make sure prior
the appropriateness of his choice and the availability of suitable products.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 15144, Winter maintenance equipment — Terminology — Terms for winter maintenance
prEN 16811-1:2015, Winter service equipment — De-icing agents — Part 1: Sodium chloride —
Requirements and test methods
prEN 16811-2:2015, Winter maintenance equipment — De-icing agents — Part 2: Calcium chloride and
Magnesium chloride — Requirements and test methods
EN 573-1, Aluminium and aluminium alloys — Chemical composition and form of wrought products —
Part 1: Numerical designation system
EN 573-2, Aluminium and aluminium alloys — Chemical composition and form of wrought products —
Part 2: Chemical symbol based designation system
EN 573-3, Aluminium and aluminium alloys — Chemical composition and form of wrought products —
Part 3: Chemical composition and form of products
EN 573-5, Aluminium and aluminium alloys — Chemical composition and form of wrought products —
Part 5: Codification of standardized wrought products
EN 932-1, Tests for general properties of aggregates — Part 1: Methods for sampling
EN 1236, Fertilizers — Determination of bulk density (loose) (ISO 3944, modified)
EN 10025-2, Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy
structural steels
EN 10025-5, Hot rolled products of structural steels — Part 5: Technical delivery conditions for structural
steels with improved atmospheric corrosion resistance
EN 13036-1, Road and airfield surface characteristics — Test methods — Part 1: Measurement of
pavement surface macrotexture depth using a volumetric patch technique
5

---------------------- Page: 7 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
EN 14231, Natural stone test methods — Determination of the slip resistance by means of the pendulum
tester
EN 1484, Water analysis — Guidelines for the determination of total organic carbon (TOC) and dissolved
organic carbon (DOC)
EN 27888, Water quality — Determination of electrical conductivity (ISO 7888)
EN ISO 1461, Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test
methods (ISO 1461)
EN ISO 1523, Determination of flash point — Closed cup equilibrium method (ISO 1523)
EN ISO 3104, Petroleum products — Transparent and opaque liquids — Determination of kinematic
viscosity and calculation of dynamic viscosity (ISO 3104)
EN ISO 9377-2, Water quality — Determination of hydrocarbon oil index — Part 2: Method using solvent
extraction and gas chromatography (ISO 9377-2)
EN ISO 11130, Corrosion of metals and alloys — Alternate immersion test in salt solution (ISO 11130)
EN ISO 11885, Water quality — Determination of selected elements by inductively coupled plasma optical
emission spectrometry (ICP-OES) (ISO 11885)
ISO 649-2, Laboratory glassware — Density hydrometers for general purposes — Part 2: Test methods
and use
ISO 565, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes
of openings
ISO 758, Liquid chemical products for industrial use — Determination of density at 20 degrees C
ISO 2479, Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and
preparation of principal solutions for other determinations
ISO 2480, Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate
gravimetric method
ISO 5815-1, Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 1:
Dilution and seeding method with allylthiourea addition
ISO 6060, Water quality — Determination of the chemical oxygen demand
ISO 2591-1, Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal
plate
ISO 12846, Water quality — Determination of mercury — Method using atomic absorption spectrometry
(AAS) with and without enrichment
ISO 15705, Water quality — Determination of the chemical oxygen demand index (ST-COD) — Small-scale
sealed tube method
6

---------------------- Page: 8 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 15144 and the following apply.
3.1
De-icing agent
product designed to prevent ice formation and / or to ensure the fusion of ice or snow
Note 1 to entry: It can be in a solid or liquid form. It can be applied pure, diluted, dissolved or mixed. It has a set
of physical-chemical properties giving it value for winter service operations (storage, use, efficiency, de-icing
performance, level of impact to the road structure, environment and public health).
4 Requirements and test methods
4.1 General
The solid and liquid de-icers shall be tested in accordance with the following methods and shall
conform to the following requirements.
4.2 De-icing performance
4.2.1 General
De-icing performance can be evaluated by one of the following two test methods.
4.2.2 Nancy-Test
The ability of the product to melt ice at −10 °C is determined, depending on its condition, solid or liquid
form, according the test method described in C.1.
This test determines:
— the immediate melting performance (PFI) corresponding to the amount of ice melted by the
product after 20 min of contact; and
— the efficient melting performance (PFE), which corresponds to the integration of the relationship
between the amount of ice melted by the product and the time, over a period of 60 min.
The minimum requirements for the couple PFI / PFE are:
— PFI ≥ 5,0 ml;
— PFE ≥ 300 ml x min.
These results are obtained on the products marketed before any possible future aqueous dilution or
mixing with other solid or liquid products.
4.2.3 Inzell-Test (informative)
The ability of the product to melt ice at −2 °C and −10 °C is determined, depending on its condition, solid
or liquid form, according the test method described in Annex D.
The test determines the de-icing capacity corresponding to the amount of ice melted by the product
after 10 min and 60 min of contact.
7

---------------------- Page: 9 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
4.2.4 Freezing curve
The supplier shall supply the product freezing point as a function of mass percentage (weight %) in
aqueous solution. It shall be complemented by the graph (freezing curve) with the freezing data (y-axis
is freezing temperature, x-axis is mass percentage).
Additives for liquid and solid de-icers shall be tested with the recommended additive concentration for
application in winter service.
The freezing point shall be determined by cryoscopic or spectroscopic methods. The used method shall
be documented in the test report.
4.3 Slip resistance
The measurement of the variation of adhesion on a road surface, after application of the product, is
performed according to the test method described in C.2.
The variation of the friction coefficient is evaluated using the apparatus described in EN 14231
compared to a water-wet road surface at +5 °C. The measurement with the product shall be performed
at +5 °C and −5 °C.
Depending on the type of road or road specific use, the product shall belong to one of the following two
classes (see Table 1).
Table 1 — Grip level classes
Class Grip level induced by the product
1 SRT ≥ 0,90 SRT
1 e
2 SRT ≥ 0,75 SRT
1 e

The friction coefficients SRTi correspond to surface conditions as follows:
— SRT in the presence of de-mineralized water;
e
— SRT in the presence of the product.
1
8

---------------------- Page: 10 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
4.4 Heavy metals and hydrocarbons
The limits for heavy metals, hydrocarbons can be found in table 2.
Table 2 — Heavy metals and hydrocarbons
Parameter Limit
mg/l
Aluminium (Al) ≤ 5,00
Arsenic (As) ≤ 0,25
Chromium (Cr) ≤ 0,50
Cadmium (Cd) ≤ 0,20
Copper (Cu) ≤ 0,50
Mercury (Hg) ≤ 0,05
Nickel (Ni) ≤ 0,50
Lead (Pb) ≤ 0,50
Zinc (Zn) ≤ 2,00
Cobalt (Co) ≤ 0,20
Hydrocarbons ≤ 10
NOTE 1 The limits are for an aqueous solution of 100 g product per litre buffered to pH 4.
The content of heavy metals, except for mercury, shall be determined by inductively coupled plasma
optical emission spectrometry (ICP-OES), on the basis of the test method in EN ISO 11885.
NOTE 2 Alternatively, the determination of contents of heavy metals can be carried out by atomic absorption
spectrometry (AAS), in accordance with the test method in ISO 15586.
The content of mercury shall be determined by cold vapour atomic absorption spectrometry, on the
basis of the test method in ISO 12846.
The content of hydrocarbons shall be determined on the basis of the test method EN ISO 9377-2.
4.5 pH
The pH of the product shall be between 5,5 and 11,5.
The pH shall be determined in accordance with the test method in EN ISO 10523 (modified:
determination in a 10 weight % aqueous solution; dissolving and dilution with distilled water).
4.6 Sulphate
The content of water soluble sulphates shall be less than 3 weight % (expressed as SO ).
4
The sulphate shall be determined based on the test method ISO 2480 (gravimetric method; modified).
NOTE Alternatively, the determination of content of sulphate can be carried out by inductively coupled
plasma optical emission spectrometry (ICP-OES), on basis of ISO 11885 or EN 15749. A further alternative test
method for the determination of sulphate is the ionic chromatography method (IC), on basis of EN 15749.
4.7 Corrosiveness
The corrosiveness of the product is determined for the following three reference metals:
9

---------------------- Page: 11 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
— the non-alloy steel standard quality (S355 and S450) as defined in EN 10025-2 and -5;
— the non-alloy steel standard quality (S355 and S450) as defined in EN 10025-2 and -5, having
received a galvanizing according to EN ISO 1461;
— the aluminium standard quality [EN AW 5754] according to EN 573-1, EN 573-2, EN 573-3 and
EN 573-5.
The corrosiveness is determined according to the test method described in C.3.
The product is assigned in one of the classes of corrosion (see Table 3).
Table 3 — Corrosion classes
Class Degree of corrosion Corrosiveness
(µm/year)
1 low < 50
2 average 50 to < 200
3 strong ≥ 200
The corrosiveness of the product is expressed in two forms coded as follows:
F . G . A - F . G . A
10i 10j 10k Maxi Maxj Maxk
where
— F, G, A represent the tested metals (steel, galvanized steel, aluminium);
— the indices i, j, and k represent the classes of corrosion corresponding;
— the indices Max and 10 correspond to the two concentrations tested.
4.8 Flash point
The minimum required is 100 °C.
The flash point shall be determined in accordance with EN ISO 1523.
4.9 Biodegradability
The lower the ratio of chemical oxygen demand (COD) and biochemical oxygen demand (BOD5) is (see
table 4).
Table 4 — Ratio of chemical oxygen demand (COD)
Ratio COD/BOD
5
Biodegradability

Readily biodegradable < 2
Fairly biodegradable 2 to 3
Not readily biodegradable > 3
The minimum requirement for the ratio of COD/BOD is ≤ 5.
5
This provision does not apply if the COD and / or BOD are not measurable.
5
10

---------------------- Page: 12 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
The biodegradability of the product is assessed, firstly, by determining the chemical oxygen demand
(COD) and biochemical oxygen demand in 5 days (BOD ) in accordance with ISO 6060, ISO 15705 and
5
ISO 5815-1, and on the other hand, the ratio of these two terms. These tests are performed on aqueous
dilutions to 10 g/l in distilled water or quality equivalent.
The supplier shall supply the individual values for COD and BOD .
5
For products with chlorides, the supplier shall supply the content of total organic components (TOC).
The content of TOC shall be determined on the basis of the test method in EN 1484 (modified: the
presence of chloride requires an appropriate pre-treatment).
4.10 Water insoluble matter
The content of water insoluble matter shall be less than 0,3 weight % for liquid products and less than
0m5 weight % for solid products.
The matter insoluble in water shall be determined according to the test method described in C.4.
4.11 Kinematic viscosity
The supplier shall supply results of measurements of kinematic viscosity at −5 °C, +5 °C and +20 °C.
2
Kinematic viscosity (in mm /second) expresses the ratio between dynamic viscosity and density.
The kinematic viscosity shall be determined in accordance with the test method in EN ISO 3104.
Solid and liquid de-icers with additives shall be tested with the recommended additive concentration
for the application in winter service.
4.12 Conductivity
−1
The supplier shall supply results of measurements of electrical conductivity (in mS x cm ).
The conductivity shall be determined in accordance with the test method in EN 27888.
The test is performed on liquid de-icers and concentrated aqueous solutions of solid de-icers
(saturation at 20 °C). Additives for liquid and solid de-icers with additives shall be tested with the
recommended additive concentration for the application in winter service.
4.13 Bulk density
The supplier shall supply the bulk density (loose) of solid products for information purposes.
The bulk density shall be determined in accordance with the test method in EN 1236.
4.14 Density
The supplier shall supply the density (at 20 °C) of liquid products for information purposes.
The density shall be determined in accordance with the test method in ISO 758 or in accordance with
the test method in ISO 649-2.
4.15 Requirements for additives and mixtures
Organic and inorganic additives for liquid and solid de-icers which are intended for special properties
like inhibition of corrosion, enhanced melting capacity or improved spreading pattern shall be
additional tested with the recommended additive concentration in de-icers for the application in winter
service.
Mixtures of chlorides of sodium, calcium, magnesium and potassium with organic and inorganic
components (additives) have to apply to the chemical requirements and to the requirements for sieve
analysis of sodium chloride in prEN 16811-1:2015 and to the chemical requirements and sieve analysis
of calcium chloride and magnesium chloride in prEN 16811-2:2015.
11

---------------------- Page: 13 ----------------------

SIST-TS CEN/TS 16811-3:2016
CEN/TS 16811-3:2015 (E)
4.16 Material safety data sheet
A material safety data sheet of the product is prepared in accordance with the provisions of REACH [1].
At time of delivery latest the material safety data sheet is made available for the customer.
All information shall be given in the languages of the countries of destination.
4.17 Marking, transport, handling and storage
4.17.1 Labelling of packaged products
The following information shall be marked on the packaging:
a) the name and address of the producer or supplier;
b) the name of the product;
c) the physical-chemical composition in form of a list of key components;
d) the net weight, optionally with the volume of the package, expressed in litres;
e) the term “De-icing agent for roads and other traffic areas” with the number of this European
Standard;
f) the information encoded or not, the traceability of the product, in particular its type, originally, the
corresponding batch to which it belongs, the date of manufacture and expiration date (un-coded).
g) the marking of the product shall be in accordance with Regulation (EC) No 1272/2008 of the
European Parliament and of the Council of 16 December 2008 [2].
All information shall be given in the languages of the countries of destination.
4.17.2 Information on delivery notes
The delivery note contains the following information:
a) the name and address of the producer or supplier;
b) the name of the product;
c) the net weight, optionally with the volume of the package, expressed in litres;
d) the term “De-icing agent for roads and other traffic areas” with the number of this European
Standard;
e) the date of shipment;
f) the reference to the order;
g) the place of loading.
All information shall be given in the languages of the countries of destination.
4.17.3 Transport, handling and storage
Annex E provides some information.
12
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.