SIST EN 2004-7:2017

SLOVENSKI STANDARD
SIST EN 2004-7:2017
01-oktober-2017
$HURQDYWLND3UHVNXVQHPHWRGH]DSURL]YRGHL]DOXPLQLMDLQDOXPLQLMHYH]OLWLQH
GHO3ULPHUMDOQHSORãþLFH]DXPHUMDQMHPHULOQHRSUHPHNLVHXSRUDEOMD]D
XJRWDYOMDQMHHOHNWULþQHSUHYRGQRVWLJQHWHQHJDDOXPLQLMDLQDOXPLQLMHYLK]OLWLQ
Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7:
Reference blocks for the calibration of measuring equipment used in the determination of
electrical conductivity of wrought aluminium and aluminium alloy
Luft- und Raumfahrt - Prüfverfahren für Erzeugnisse aus Aluminium und
Aluminiumlegierungen - Teil 7: Referenzblöcke zur Eichung von Meßgeräten zur
Bestimmung der elektrischen Leitfähigkeit von gekneteten Aluminium und Aluminium-
Legierungen
Série aérospatiale - Méthodes d'essais applicables aux produits en aluminium et alliages
d'aluminium - Partie 7 : Blocs de référence pour l'étalonnage pour la détermination de la
conductivité électrique d'aluminium et d'alliages d'aluminium corroyés
Ta slovenski standard je istoveten z: EN 2004-7:2017
ICS:
49.025.20 Aluminij Aluminium
SIST EN 2004-7:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 2004-7:2017

---------------------- Page: 2 ----------------------

SIST EN 2004-7:2017


EN 2004-7
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2017
EUROPÄISCHE NORM
ICS 49.025.20
English Version

Aerospace series - Test methods for aluminium and
aluminium alloy products - Part 7: Reference blocks for the
calibration of measuring equipment used in the
determination of electrical conductivity of wrought
aluminium and aluminium alloys
Série aérospatiale - Méthodes d'essais applicables aux Luft- und Raumfahrt - Prüfverfahren für Erzeugnisse
produits en aluminium et alliages d'aluminium - Partie aus Aluminium und Aluminiumlegierungen - Teil 7:
7 : Blocs de référence pour l'étalonnage pour la Referenzblöcke zur Eichung von Meßgeräten zur
détermination de la conductivité électrique Bestimmung der elektrischen Leitfähigkeit von
d'aluminium et d'alliages d'aluminium corroyés gekneteten Aluminium und Aluminium-Legierungen
This European Standard was approved by CEN on 14 May 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2004-7:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 2004-7:2017
EN 2004-7:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Production and calibration of master reference standards . 4
5 Production and calibration of secondary reference blocks . 5
6 Production and calibration of operating reference blocks . 5
7 Calibration schedule . 7
8 Identification . 7
9 Records . 7
10 Availability . 7
11 Disputes . 8
Annex A (informative) National Standards Laboratories which can provide secondary reference
blocks . 9

2

---------------------- Page: 4 ----------------------

SIST EN 2004-7:2017
EN 2004-7:2017 (E)
European foreword
This document (EN 2004-7:2017) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this European
Standard has received the approval of the National Associations and the Official Services of the member
countries of ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall
be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 2004-7:2017
EN 2004-7:2017 (E)
1 Scope
This European Standard defines different types of electrical conductivity reference blocks, to be used for
the calibration of eddy current conductivity measuring equipment, their method of production and
calibration.
It is to be used in conjunction with EN 2004-1.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 2004-1, Aerospace series - Test methods for aluminium and aluminium alloy products - Part 1:
Determination of electrical conductivity of wrought aluminium alloys
ISO 10012-1, Quality assurance requirements for measuring equipment - Part 1: Metrological confirmation
system for measuring equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
master reference standards
a set of electrical conductivity reference standards, held by a National Standards Laboratory or an
Accredited Laboratory and traceable to electrical reference standards
Note 1 to entry: This set is maintained as the reference standard against which all the corresponding secondary
reference blocks shall be calibrated.
3.2
secondary reference blocks
sets of electrical conductivity reference blocks calibrated by a National Standards Laboratory or an
Accredited Laboratory against its master reference standards using eddy current conductivity measuring
equipment. Individual companies or organisations may hold sets of secondary reference blocks
Note 1 to entry: These blocks are the means by which traceability to the master reference standards is
maintained.
3.3
operating reference blocks
sets of electrical conductivity reference blocks prepared and calibrated by competent personnel against
secondary reference blocks using eddy current conductivity measuring equipment
Note 1 to entry: The operating reference blocks are used for routine instrument calibration.
4 Production and calibration of master refere
...