Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)

This part of ISO 5395 specifies safety requirements and their verification for combustion-enginepowered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named “lawnmower”), and equipped with: - metallic cutting means; and/or - non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more. This part of ISO 5395 does not apply to: - robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed/semi-mounted grass-cutting machines, and scrub-clearing machines; - cutting-means assembly when used in combination with an agricultural tractor; - electrically powered and battery-powered lawnmowers.

Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene Rasenmäher - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem Benutzer (ISO 5395-3:2013)

1.1   Dieses Dokument legt Sicherheitsanforderungen und deren Überprüfung für Sichel- und Spindelmäher mit Fahrersitz (sitzend oder stehend) mit Antrieb durch integrierten Verbrennungsmotor (nachfolgend „Rasenmäher“ genannt) und ausgestattet mit:
-   metallischem Schneidwerkzeug und/oder
-   nichtmetallischem Schneidwerkzeug mit einem oder mehreren Schneidelementen, die auf einer zentralen Antriebseinheit drehbar angeordnet sind und durch Zentrifugalkraft der Schneidelemente den Schneid-vorgang erzeugen und eine kinetische Energie eines einzelnen Schneidwerkzeuges von 10 Joule oder mehr aufweisen.
Dieses Dokument gilt nicht für:
-   Robotermäher und Rasenmäher mit Fernsteuerung, Schlegelmäher, Graslandmäher, Balkenmäher, gezogene / halbgezogene Grasschneidemaschinen und Gestrüppmaschinen;
-   Schneidwerkzeugbaugruppe, wenn in Kombination mit einem landwirtschaftlichen Traktor genutzt;
-   elektrische und Batterie betriebene Rasenmäher.
1.2   Dieses Dokument behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder -ereignisse (siehe Anhang C), bezogen auf Rasenmäher, wenn sie unter dem vorgegebenen Zweck und bei vom Hersteller vernünftigerweise vorhersehbarem Missbrauch  eingesetzt werden.
1.3   Dieses Dokument gilt nicht für Rasenmäher, die vor dem Datum der Veröffentlichung dieses Dokuments hergestellt worden sind.

Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à combustion interne - Partie 3: Tondeuses à gazon à conducteur assis (ISO 5395-3:2013)

L'ISO 5395-3:2013 spécifie les exigences de sécurité, et les méthodes utilisées pour leur vérification, applicables aux tondeuses à gazon à moteur à combustion interne, à axe vertical ou à lames hélicoïdales, et à conducteur assis, équipées d'un organe de coupe métallique, et/ou d'un organe de coupe non métallique avec un ou plusieurs éléments de coupe montés sur une unité centrale, pivotante en général circulaire: l'action de coupe de ces éléments dépend de la force centrifuge et l'énergie cinétique de chacun est égale ou supérieure à 10 J.
L'ISO 5395-3:2013 n'est pas applicable: aux tondeuses à gazon robotisées et télécommandées, tondeuses à fléaux, faucheuses, motofaucheuses à barre de coupe, tondeuses remorquées/semi-portées et débroussailleuses; aux assemblages d'organes de coupe lorsqu'ils sont utilisés avec un tracteur agricole; aux tondeuses à gazon électriques et à batterie.
L'ISO 5395-3:2013 traite de tous les phénomènes dangereux significatifs, situations ou événements dangereux applicables aux tondeuses à gazon lorsqu'elles sont utilisées comme prévu et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant.
L'ISO 5395-3:2013 n'est pas applicable aux tondeuses à gazon qui sont fabriquées avant sa date de publication.

Oprema za nego vrta - Varnostne zahteve za motorne vrtne kosilnice - 3. del: Kosilnice s sedežem za košnjo v sedečem položaju (ISO 5395-3:2013)

Ta del standarda ISO 5395 določa varnostne zahteve in njihovo preverjanje za motorne vrtne kosilnice s sedežem za košnjo v sedečem položaju in cilindrične vrtne kosilnice (v nadaljnjem besedilu: »vrtna kosilnica«), ki so opremljene z: – kovinskim rezalnim mehanizmom in/ali – nekovinskim rezalnim mehanizmom z enim ali več rezalnimi elementi, ki so vrtljivo nameščeni na splošno krožno pogonsko enoto, pri čemer se ti rezalni elementi zanašajo na centrifugalno silo, da dosežejo rezanje, s kinetično energijo enega rezalnega elementa, ki presega 10 J. Ta del standarda ISO 5395 se ne uporablja za: – robotske in daljinsko vodene vrtne kosilnice, mulčerje, kosilnice za travišča, kosilnice s srpom na drogu, vlečene/polpriklopne stroje za košnjo trave in stroje za odstranjevanje grmičev; – sestave za košnjo, kadar se uporabljajo v kombinaciji s kmetijskim traktorjem; – vrtne kosilnice na električni in baterijski pogon.

General Information

Status
Published
Public Enquiry End Date
24-Apr-2010
Publication Date
17-Dec-2013
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-Oct-2013
Due Date
03-Jan-2014
Completion Date
18-Dec-2013

Relations

Buy Standard

Standard
EN ISO 5395-3:2014
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5395-3:2014
01-januar-2014
1DGRPHãþD
SIST EN 836:1998+A4:2011
SIST ISO 5395:1995
2SUHPD]DQHJRYUWD9DUQRVWQH]DKWHYH]DPRWRUQHYUWQHNRVLOQLFHGHO
.RVLOQLFHVVHGHåHP]DNRãQMRYVHGHþHPSRORåDMX ,62
Garden equipment - Safety requirements for combustion-engine-powered lawnmowers -
Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)
Gartengeräte - Sicherheitsanforderungen für verbrennungsmotorisch angetriebene
Rasenmäher - Teil 3: Rasenmäher mit Fahrersitz mit sitzendem Benutzer (ISO 5395-
3:2013)
Matériel de jardinage - Exigences de sécurité pour les tondeuses à gazon à moteur à
combustion interne - Partie 3: Tondeuses à gazon à conducteur assis (ISO 5395-3:2013)
Ta slovenski standard je istoveten z: EN ISO 5395-3:2013
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN ISO 5395-3:2014 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5395-3:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 5395-3:2014


EUROPEAN STANDARD
EN ISO 5395-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2013
ICS 65.060.70 Supersedes EN 836:1997+A4:2011
English Version
Garden equipment - Safety requirements for combustion-engine-
powered lawnmowers - Part 3: Ride-on lawnmowers with seated
operator (ISO 5395-3:2013)
Matériel de jardinage - Exigences de sécurité pour les Gartengeräte - Sicherheitsanforderungen für
tondeuses à gazon à moteur à combustion interne - Partie verbrennungsmotorisch angetriebene Rasenmäher - Teil 3:
3: Tondeuses à gazon à conducteur assis (ISO 5395- Rasenmäher mit Fahrersitz mit sitzendem Benutzer (ISO
3:2013) 5395-3:2013)
This European Standard was approved by CEN on 19 July 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5395-3:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 5395-3:2014
EN ISO 5395-3:2013 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC (PED) .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 5395-3:2014
EN ISO 5395-3:2013 (E)
Foreword
This document (EN ISO 5395-3:2013) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at
the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 836:1997+A4:2011.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 5395-3:2013 has been approved by CEN as EN ISO 5395-3:2013 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 5395-3:2014
EN ISO 5395-3:2013 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC (PED)
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC amended by 2009/127/EC.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.

WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
NOTE Compliance with Part 3, together with Part 1, is necessary to achieve presumption of conformity
with the Essential Requirements of Directive 2006/42/EC and associated EFTA regulations.


4

---------------------- Page: 6 ----------------------

SIST EN ISO 5395-3:2014
INTERNATIONAL ISO
STANDARD 5395-3
Second edition
2013-09-01
Garden equipment — Safety
requirements for
combustion-engine-powered
lawnmowers —
Part 3:
Ride-on lawnmowers with seated
operator
Matériel de jardinage — Exigences de sécurité pour les tondeuses à
gazon à moteur à combustion interne —
Partie 3: Tondeuses à gazon à conducteur assis
Reference number
ISO 5395-3:2013(E)
©
ISO 2013

---------------------- Page: 7 ----------------------

SIST EN ISO 5395-3:2014
ISO 5395-3:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 5395-3:2014
ISO 5395-3:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements for ride-on lawnmowers . 2
4.1 General . 2
4.2 Controls . 2
4.3 Operator presence control (OPC) . 6
4.4 Brakes . 6
4.5 Guards . 9
4.6 Stability .11
4.7 Rollover protective structure (ROPS) .12
4.8 Seat belts .12
4.9 Seats and foot rests .13
4.10 Transport position of the cutting-means assembly .14
4.11 Separate fan for grass collection .14
4.12 Hot surfaces .15
4.13 Exhaust fumes .15
4.14 Pressurized components of hydraulic systems .15
4.15 Liquid spillage .15
4.16 Electrical system .16
4.17 Electromagnetic immunity .16
4.18 Noise .17
4.19 Vibration .17
5 Particular requirements for ride-on rotary lawnmowers.18
5.1 Cutting means .18
5.2 Impact of the cutting means .19
5.3 Cutting-means enclosure .19
5.4 Structural integrity .23
5.5 Thrown objects .23
5.6 Grass catchers .24
6 Particular requirements for ride-on cylinder lawnmowers .24
6.1 Cutting-means enclosure .24
6.2 Throw line .27
6.3 Stopping time of the cutting means .27
7 Information for use .27
7.1 Instruction handbook .27
7.2 Markings and warnings .30
Annex A (normative) Ride-on lawnmower stability test .33
Annex B (normative) Determination of contact with moving power-driven components .36
Annex C (informative) List of significant hazards .40
Bibliography .42
© ISO 2013 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 5395-3:2014
ISO 5395-3:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5395-3 was prepared by the European Committee for Standarization (CEN) Technical Committee
CEN/TC 144, Tractors and machinery for agriculture and forestry in collaboration with ISO Technical
Committee TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 13, Powered
lawn and garden equipment, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
This second edition of ISO 5395-3, together with ISO 5395-1 and ISO 5395-2, cancels and replaces
ISO 5395:1990, which has been technically revised. These three parts also incorporate the Amendment
ISO 5395:1990/Amd.1:1992.
ISO 5395 consists of the following parts, under the general title Garden equipment — Safety requirements
for combustion-engine-powered lawnmowers:
— Part 1: Terminology and common tests
— Part 2: Pedestrian-controlled lawnmowers
— Part 3: Ride-on lawnmowers with seated operator
iv © ISO 2013 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 5395-3:2014
ISO 5395-3:2013(E)

Introduction
This document is a type-C standard as stated in ISO 12100.
The machinery concerned and the extent to which hazards, hazardous situations or hazardous events
are covered are indicated in the scope of this document.
When requirements of this type-C standard are different from those which are stated in type-A or
type-B standards, the requirements of this type-C standard take precedence over the requirements of
the other standards for machines that have been designed and built according to the requirements of
this type-C standard.
© ISO 2013 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 5395-3:2014

---------------------- Page: 12 ----------------------

SIST EN ISO 5395-3:2014
INTERNATIONAL STANDARD ISO 5395-3:2013(E)
Garden equipment — Safety requirements for
combustion-engine-powered lawnmowers —
Part 3:
Ride-on lawnmowers with seated operator
1 Scope
1.1 This part of ISO 5395 specifies safety requirements and their verification for combustion-engine-
powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named “lawnmower”),
and equipped with:
— metallic cutting means; and/or
— non-metallic cutting means with one or more cutting elements pivotally mounted on a generally
circular drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and
have a kinetic energy for each single cutting element of 10 J or more.
This part of ISO 5395 does not apply to:
— robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers,
towed/semi-mounted grass-cutting machines, and scrub-clearing machines;
— cutting-means assembly when used in combination with an agricultural tractor;
— electrically powered and battery-powered lawnmowers.
1.2 This part of ISO 5395 deals with all significant hazards, hazardous situations or events (see
Annex C) relevant to lawnmowers when used as intended and under the conditions of misuse which are
reasonably foreseeable by the manufacturer.
1.3 This part of ISO 5395 is not applicable to lawnmowers which are manufactured before the date
of publication of this document.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
IEC 61032:1997, Protection of persons and equipment by enclosures — Probes for verification
ISO 3776-2:2013, Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements
ISO 3776-3:2009, Tractors and machinery for agriculture — Seat belts — Part 3: Requirements for assemblies
ISO 5353, Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point
ISO 5395-1:2013, Garden equipment — Safety requirements for combustion-engine-powered lawnmowers —
Part 1: Terminology and common tests
ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 13849-1:2006, Safety of machinery — Safety-related parts of control systems — Part 1: General
principles for design
© ISO 2013 – All rights reserved 1

---------------------- Page: 13 ----------------------

SIST EN ISO 5395-3:2014
ISO 5395-3:2013(E)

ISO 13857:2008, Safety of machinery — Safety distances to prevent hazard zones being reached by upper
and lower limbs
ISO 14119:1998, Safety of machinery — Interlocking devices associated with guards — Principles for design
and selection
ISO 14982:1998, Agricultural and forestry machinery — Electromagnetic compatibility — Test methods
and acceptance criteria
ISO 17398:2004, Safety colours and safety signs — Classification, performance and durability of safety signs
ISO 21299:2009, Powered ride-on turf care equipment — Roll-over protective structures (ROPS) — Test
procedures and acceptance criteria
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12100 and ISO 5395-1 apply.
4 Requirements for ride-on lawnmowers
4.1 General
The lawnmower shall comply with the safety requirements and/or protective measures of this clause.
The lawnmower shall be marked and carry warnings according to 7.2 and shall be provided with an
instruction handbook which complies with 7.1.
In addition, the lawnmower shall be designed according to the principles of ISO 12100 for relevant but
not significant hazards which are not dealt with by this part of ISO 5395. An audible warning device (for
example, a horn) is not required.
Unless otherwise stated, all tests shall be carried out at an ambient temperature between 15 °C and 35 °C.
If not otherwise specified within this part of ISO 5395, the tests may be carried out in any order and on
separate machines, cutting-means enclosures, and cutting-means components.
When the order in which tests should be carried out and the number of permitted machines are not
defined in this part of ISO 5395, these conditions should be determined by agreement between the
persons carrying out the tests and the manufacturer.
Where it is specified that the engine shall run during the test, it shall be operated at the maximum
operating engine speed (see definition in ISO 5395-1). If the measured engine speed is not within the
limits specified in the instruction handbook, the engine speed shall be adjusted in accordance with the
manufacturer’s instructions.
4.2 Controls
4.2.1 General
Separate controls shall be provided for the traction drive and cutting-means engagement.
Directional control mechanisms that cause forward and reverse propulsion as well as forward and
reverse speed control shall have a neutral position.
Except for lever-steer lawnmowers, when released, a traction drive speed control shall automatically
return to the neutral position or shall be capable of being overridden by the service brake.
Foot control pedals shall have slip-resistant surfaces or other means of minimizing the possibility of the
operator’s foot slipping off the control pedal.
2 © ISO 2013 – All rights reserved

---------------------- Page: 14 ----------------------

SIST EN ISO 5395-3:2014
ISO 5395-3:2013(E)

Except for lever-steer lawnmowers, forward/reverse directional controls shall require at least one of
the following:
a) a distinct change in direction of the control actuation (for example, right angle to general path of
control motion) at a point before a change in direction occurs; or
b) a distinct change in force level at the point of entry into the selected direction; or
c) a positive means of retarding machine acceleration, for example hydrostatic control with valves
operated by rigid linkages.
The traction drive and cutting means shall automatically stop or disengage when the operator leaves
the operating position.
Compliance shall be checked by functional test and inspection to demonstrate that it meets the above
requirements.
The location of operator controls, to be operated from the operator’s position during grass cutting, shall
be within the zones of Figure 1 for an operator in the required operator position.
The operator control zone defined in Figure 1 includes the maximum movement range of the controls
but is not intended to represent preferred operator control positions.
For the seated operator, the operator control zone is established with the seat in the rear-most position.
[10]
NOTE ISO/TS 15079 gives useful information about location and operation of operator controls.
For the purpose of this clause, the following shall not be considered as operator controls that are
operated during grass cutting:
— height-of-cut setting;
— fixed cutting-means setting or adjustment;
— grass catcher discharge opening;
— hydrostatic bypass valve;
— engine-starting controls which meet 4.2.3;
— engine-stopping controls if separate from cutting-means stopping control;
— parking brake.
Compliance shall be checked by inspection and measurement.
© ISO 2013 – All rights reserved 3

---------------------- Page: 15 ----------------------

SIST EN ISO 5395-3:2014
ISO 5395-3:2013(E)

Dimensions in millimetres, tolerances ± 3 mm
305
254
140
455
Figure 1 — Operator control zone for seated operator
NOTE The operator control zone, illustrated in Figure 1 is the area into which the extremities of a 95th
percentile male can reach from the normal operator position.
4.2.2 Engine speed
The lawnmower shall be designed so that it is not possible to sustain an engine speed greater than the
maximum operating engine speed (see definition in ISO 5395-1) by the use of any control or without
replacing or reconfiguring engine speed control components.
Compliance shall be checked by inspection and measurement.
4.2.3 Engine-starting device
Any engine-starting device (e.g. start switch, recoil rope starter) shall require intentional activation in
order to start the engine.
A starter operated by means of a loose rope is not allowed.
For battery started engines, the start switch shall be operated by a removable key or a similar device to
prevent unauthorized starting.
4 © ISO 2013 – All rights reserved
R762
R610
R762
356
475
94
570
406 406

---------------------- Page: 16 ----------------------

SIST EN ISO 5395-3:2014
ISO 5395-3:2013(E)

The engine shall only start if the:
— operator is in position or parking brake is applied; and
— traction drive and cutting means are disengaged.
Compliance shall be checked by functional test and inspection.
4.2.4 Engine-stopping device
An engine-stopping device shall be provided. The device shall not depend on sustained manual pressure
for its continued operation.
NOTE An emergency stop device is not required.
Compliance shall be checked by functional test and inspection.
4.2.5 Steering wheel
If the lawnmower is equipped with a steering wheel, when moving forward a clockwise rotation shall
effect a right turn and counter-clockwise rotation shall effect a left turn.
During operation, the steering mechanism shall not lock in any position.
Compliance shall be checked by functional test and inspection.
4.2.6 Lever steering and motion controls
4.2.6.1 General
If the lawnmower is equipped with lever(s) for directional control, movement of the lever(s) forward shall
result in forward motion, and movement of the lever(s) rearward shall result in rearward motion. If the
operator releases the levers while in the rearward position, the directional controls shall automatically
return to the neutral position or the machine’s rearward motion shall stop.
Compliance shall be checked by functional test and inspection.
4.2.6.2 Lawnmower with two control levers
Movement of the right lever shall control the right drive wheel.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.