SIST EN 1092-3:2004

Oznaka standarda: SIST EN 1092-3:2004
Koda projekta: 00074048
Organizacija: SIST
Naslov (angleški): Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
Naslov (slovenski): Prirobnice in prirobnični spoji - Okrogle prirobnice za cevi, ventile, fitinge in pribor z oznako PN - 3. del: Prirobnice iz bakrovih zlitin
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 1092-3:2004 angleški jezik Active SIST-H: 78.65 EUR
PDF
Papir
Tehnični odbor: TLP - Tlačne posode
ICS: 23.040.60
Status: Objavljen
Objavljen: 01-Jun-2004
Refer. št. objave: Sporocila 2004-06-01
Referenčna oznaka: EN 1092-3:2003
Področje projekta (angleško): This European Standard specifies requirements for circular copper alloy flanges and copper alloy collars combined with loose steel plate flanges in PN designations from PN 6 to PN 40 and nominal sizes from DN 10 to DN 1800 in the types shown in Table 1. This standard also specifies dimensions and tolerances, materials and their associated pressure/temperature (p/T) ratings, flange facings and related surface finish, weld repairs, and marking, together with information on bolting, gaskets, application/installation and approximate flange masses. The flanges specified, with the exception of integral (type 21) flanges, are for attachment to copper or copper alloy tubes in accordance with EN 12449. NOTE 1 When the flanges specified in this standard are required for use with copper or copper alloy tubes to EN 1057 in those tube diameters which are different to EN 12449, this should be agreed between the equipment manufacturer and the flange manufacturer. NOTE 2 The size of copper and copper alloy tubes is designated by reference to the outside diameter in millimetres. NOTE 3 See also annex B. NOTE 4 Non-gasketed pipe joints are outside the scope of this standard.
Povezava na standarde
Povezava Ime Datum
Popravljen z SIST EN 1092-3:2004/AC:2005 - Prirobnice in prirobnični spoji - Okrogle prirobnice za cevi, ventile, vezne elemente (fitinge) in dodatke z oznako PN - 3. del: Prirobnice iz bakrovih zlitin 01-May-2005
Popravljen z SIST EN 1092-3:2004/AC:2007 - Prirobnice in prirobnični spoji - Okrogle prirobnice za cevi, ventile, fitinge in pribor z oznako PN - 3. del: Prirobnice iz bakrovih zlitin - Popravek AC 18-Oct-2007
Revidiran oSIST prEN 1092-3:2022 - Prirobnice in prirobnični spoji - Okrogle prirobnice za cevi, ventile, fitinge in pribor z oznako PN - 3. del: Prirobnice iz bakrovih zlitin 01-Jan-2022


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi