SIST EN 14015:2005

Oznaka standarda: SIST EN 14015:2005
Koda projekta: 00265003
Organizacija: SIST
Naslov (angleški): Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
Naslov (slovenski): Specifikacija za načrtovanje in proizvodnjo na mestu postavitve grajenih navpičnih, valjastih, varjenih, jeklenih nadzemnih posod z ravnim dnom za shranjevanje tekočin pri temperaturi okolja ali višji temperaturi
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 14015:2005 angleški jezik Active SIST-T: 165.00 EUR
PDF
Papir
Tehnični odbor: TLP - Tlačne posode
ICS: 23.020.10
Status: Objavljen
Objavljen: 01-mar-2005
Refer. št. objave: Sporocila 2005-03-01
Področje projekta (angleško): This document specifies the requirements for the materials, design, fabrication, erection, testing and inspection of site built, vertical, cylindrical, flat bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperatures and above, and the technical agreements that need to be reached (see Annex A). This document does not apply to tanks where the product is refrigerated to maintain it as a liquid at atmospheric pressure (see prEN 14620). This document is concerned with the structural integrity of the basic tank structure and does not provide requirements for considering process design, operational issues, safety and firefighting facilities, in-service inspection, maintenance or repair. These aspects are covered in detail in other Codes of Practice (see Annex B). 1.2 This document applies to closed-top tanks, with and without internal floating covers (see Annex C) and open-top tanks, with and without floating roofs (see Annexes D and E). It does not apply to 'lift-type' gas holders. 1.3 This document applies to storage tanks with the following characteristics: a) design pressure less than 500 mbar ) and design internal negative pressure not lower than 20 mbar (see 5.1 for pressure limitations); b) design metal temperature not lower than -40 °C and not higher than +300 °C (see 5.2.2); c) maximum design liquid level not higher than the top of the cylindrical shell. 1.4 The limits of application of this document terminate at the following locations. - face of the first flange in a bolted flange connection; - first threaded joint on the pipe or coupling outside of the tank shell, roof or bottom; - first circumferential joint in a pipe not having a flange connection. 1.5 This document is applicable to steel tanks with a maximum design strength L 260 N/mm2. 1.6 In addition to the definitive requirements, this document also requires the items detailed in Annex A to be documented. For compliance with this document,
Povezava na standarde
Povezava Ime Datum
Revidiran oSIST prEN 14015:2017 - Specifikacija za konstruiranje in proizvodnjo na mestu postavitve grajenih navpičnih, valjastih, varjenih, jeklenih nadzemnih posod z ravnim dnom za shranjevanje tekočin pri temperaturi okolice ali višji temperaturi 01-dec-2017
Dopolnjen z SIST EN 14015:2005/oprA1:2005 - Specifikacija za načrtovanje in proizvodnjo na mestu postavitve grajenih navpičnih, valjastih, varjenih, jeklenih nadzemnih posod z ravnim dnom za shranjevanje tekočin pri temperaturi okolja ali višji temperaturi 01-apr-2005


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi