SIST EN IEC 61439-1:2021

Oznaka standarda: SIST EN IEC 61439-1:2021
Koda projekta: 61954
Organizacija: SIST
Naslov (angleški): Low-voltage switchgear and controlgear assemblies - Part 1: General rules (IEC 61439-1:2020)
Naslov (slovenski): Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila (IEC 61439-1:2020)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN IEC 61439-1:2021 angleški jezik Active SIST-P: 151.25 EUR
PDF
Papir
Tehnični odbor: SKA - Stikalni in krmilni aparati
ICS: 29.130.20
Status: Objavljen
Objavljen: 01-jul-2021
Refer. št. objave: Sporocila 2021-07
Referenčna oznaka: EN IEC 61439-1:2021
Področje projekta (angleško): This part of IEC 61439 lays down the general definitions and service conditions, construction requirements, technical characteristics and verification requirements for low-voltage switchgear and controlgear assemblies. NOTE Throughout this document, the term assembly(s) (see 3.1.1) is used for a low-voltage switchgear and controlgear assembly(s). For the purpose of determining assembly conformity, the requirements of the relevant part of the IEC 61439 series, Part 2 onwards, apply together with the cited requirements of this document. For assemblies not covered by Part 3 onward, Part 2 applies. This document applies to assemblies only when required by the relevant assembly standard as follows: – assemblies for which the rated voltage does not exceed 1 000 V AC or 1 500 V DC; – assemblies designed for a nominal frequency of the incoming supply or supplies not exceeding 1 000 Hz; – assemblies intended for indoor and outdoor applications; – stationary or movable assemblies with or without an enclosure; – assemblies intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electrical energy consuming equipment. This document does not apply to individual devices and self-contained components such as motor starters, fuse switches, power electronic converter systems and equipment (PECS), switch mode power supplies (SMPS), uninterruptable power supplies (UPS), basic drive modules (BDM), complete drive modules (CDM), adjustable speed power drives systems (PDS), and other electronic equipment which comply with their relevant product standards. This document describes the integration of devices and self-contained components into an assembly or into an empty enclosure forming an assembly. For some applications involving, for example, explosive atmospheres, functional safety, there can be a need to comply with the requirements of other standards or legislation in addition to those specified in the IEC 61439 series.
Povezava na standarde
Povezava Ime Datum
Revidiran SIST EN 61439-1:2012 - Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila (IEC 61439-1:2011) 19-jan-2016
Nadomešča SIST EN 61439-1:2012 - Sestavi nizkonapetostnih stikalnih in krmilnih naprav - 1. del: Splošna pravila (IEC 61439-1:2011) 25-maj-2021


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi