SIST EN 1265:2000

Oznaka standarda: SIST EN 1265:2000
Koda projekta: 00202005
Organizacija: SIST
Naslov (angleški): Noise test code for foundry machines and equipment
Naslov (slovenski): Pravila za merjenje hrupa livarskih strojev in opreme
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 1265:2000 angleški jezik Withdrawn SIST-I: 85.91 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 17.140.20 25.120.30
Status: Razveljavljen
Objavljen: 01-apr-2000
Refer. št. objave: Sporocila 2000-04-01
Razveljavitev: 01-jan-2009
Referenca razveljavitve: Sporočila 2009-01
Referenčna oznaka: EN 1265:1999
Področje projekta (angleško): Based on EN 292-2:1991, Annex A 1.7.4 f, this noise test code specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission characteristics of several groups of foundry machinery. It specifies noise measurement methods that are available and operating and mounting conditions that shall be used for the test. Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. The determination of these quantities is necessary for: - manufacturers to declare the noise emitted; - comparing the noise emitted by machines in the group concerned; - purposes of noise control at the source at the design stage. The use of this standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3). This standard has a main body giving general requirements common to the foundry machines family. Six normative Annexes give requirements specific to the groups of foundry machinery listed below: - core making machines (EN 710); - moulding machines (EN 710); - knock-out grids and knock-out trays (EN 710); - dry abrasive blasting equipment (not restricted to foundry application) - (prEN 1248); - air blasting equipment (prEN 1248); - diecasting machines (EN 869); and six informative Annexes giving guidance for the definition of specific operating conditions. The main body of this standard also gives guidance for the measurement of the noise emission of foundry machines not dealt with in the Annexes. This standard does not cover the computation of personnel daily noise exposure.
Povezava na standarde
Povezava Ime Datum
Konsolidiran z SIST EN 1265:2000+A1:2009 - Varnost strojev - Postopki za merjenje hrupa livarskih strojev in opreme 01-jan-2009


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi