Pneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature

Transmissions pneumatiques -- Filtres pour air comprimé -- Partie 2: Méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation des fournisseurs

Fluidna tehnika - Pnevmatika - Filtri - 2. del: Preskusne metode za ugotavljanje glavnih značilnosti, ki morajo biti navedene v dokumentaciji dobaviteljev

General Information

Status
Published
Publication Date
31-Aug-2000
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2000
Due Date
01-Sep-2000
Completion Date
01-Sep-2000

Buy Standard

Standard
ISO 5782-2:1997 - Pneumatic fluid power -- Compressed-air filters
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 5782-2:2000
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 5782-2:1997 - Transmissions pneumatiques -- Filtres pour air comprimé
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 5782-2
First edition
1997-12-15
Pneumatic fluid power — Compressed air
filters —
Part 2:
Test methods to determine the main
characteristics to be included in supplier's
literature
Transmissions pneumatiques — Filtres pour air comprimé —
Partie 2: Méthodes d'essai pour déterminer les principales caractéristiques
à inclure dans la documentation des fournisseurs
A
Reference number
ISO 5782-2:1997(E)

---------------------- Page: 1 ----------------------
ISO 5782-2:1997(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 5782-2 was prepared by Technical Committee
ISO/TC 131, Fluid power systems, Subcommittee SC 5, Control products
and components.
ISO 5782 consists of the following parts, under the general title Pneumatic
fluid power — Compressed air filters:
— Part 1: Main characteristics to be included in supplier's literature and
product-marking requirements
— Part 2: Test methods to determine the main characteristics to be
included in supplier's literature
Annex A of this part of ISO 5782 is for information only.
©  ISO 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
©
ISO ISO 5782-2:1997(E)
Introduction
In pneumatic fluid power systems, power is transmitted and controlled
through air under pressure within a circuit. Where mechanical filtration of
the air media is desired, filters are components designed to remove solid
and liquid contaminants from compressed air.
iii

---------------------- Page: 3 ----------------------
©
INTERNATIONAL STANDARD  ISO ISO 5782-2:1997(E)
Pneumatic fluid power — Compressed air filters —
Part 2:
Test methods to determine the main characteristics to be included
in supplier's literature
1 Scope
This part of ISO 5782 specifies tests, procedures and a method of presenting the results concerning the
parameters which define the main characteristics to be included in the supplier's literature of filters
conforming to ISO 5782-1.
The scope of this part of ISO 5782 is
— to facilitate the comparison of filters by standardizing test methods and presentation of test data;
— to assist in the proper application of filters in compressed air systems.
The tests specified are intended to allow comparison between the different type of filters; they are not
production tests to be carried out on each filter manufactured.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of
this part of ISO 5782. At the time of publication, the editions indicated were valid. All standards are
subject to revision, and parties to agreements based on this part of ISO 5782 are encouraged to
investigate the possibility of applying the most recent editions of the standards indicated below.
Members of IEC and ISO maintain registers of currently valid International Standards.
Preferred numbers — Series of preferred numbers.
ISO 3:1973,
ISO 2944:1974, Fluid power systems and components — Nominal pressures.
ISO 3448:1992, Industrial liquid lubricants — ISO viscosity classification.
Fluid power systems and components — Vocabulary.
ISO 5598:1985,
ISO 5782-1:1997, Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics
to be included in supplier's literature and product-marking requirements.
ISO 6358:1989, Pneumatic fluid power — Components using compressible fluids — Determination
of flow-rate characteristics.
3 Definitions
For the purposes of this part of ISO 5782, the definitions given in ISO 5598 and ISO 5782-1 apply.
1

---------------------- Page: 4 ----------------------
©
ISO
ISO 5782-2:1997(E)
4 Units
Units from ISO 1000 are generally used in pneumatic fluid power systems, in particular:
— gauge pressure, expressed in kilopascals (bars);
— temperature, expressed in degrees Celsius;
— flow rate, expressed in cubic decimetres per second (ANR).
5 Test conditions
5.1 Temperature
The temperature of the processed air, the equipment and the ambient air temperature shall be
maintained at 25 °C ± 10 °C for all tests.
5.2 Pressures
The specified pressures shall be held to within ± 2 %. The preferred test pressures are those given in
4.2.1 of ISO 5782-1:1997 or in ISO 2944. Where other tes
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YLWHOMHYTransmissions pneumatiques -- Filtres pour air comprimé -- Partie 2: Méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation des fournisseursPneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature23.100.60Filters, seals and contamination of fluidsICS:Ta slovenski standard je istoveten z:ISO 5782-2:1997SIST ISO 5782-2:2000en01-september-2000SIST ISO 5782-2:2000SLOVENSKI
STANDARD



SIST ISO 5782-2:2000



AReference numberISO 5782-2:1997(E)INTERNATIONALSTANDARDISO5782-2First edition1997-12-15Pneumatic fluid power — Compressed airfilters —Part 2:Test methods to determine the maincharacteristics to be included in supplier'sliteratureTransmissions pneumatiques — Filtres pour air comprimé —Partie 2: Méthodes d'essai pour déterminer les principales caractéristiquesà inclure dans la documentation des fournisseursSIST ISO 5782-2:2000



ISO 5782-2:1997(E)©
ISO 1997All rights reserved. Unless otherwise specified, no part of this publication may be reproducedor utilized in any form or by any means, electronic or mechanical, including photocopying andmicrofilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 · CH-1211 Genève 20 · SwitzerlandInternetcentral@iso.chX.400c=ch; a=400net; p=iso; o=isocs; s=centralPrinted in SwitzerlandiiForewordISO (the International Organization for Standardization) is a worldwidefederation of national standards bodies (ISO member bodies). The work ofpreparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for whicha technical committee has been established has the right to be representedon that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISOcollaborates closely with the International Electrotechnical Commission(IEC) on all matters of electrotechnical standardization.Draft International Standards adopted by the technical committees arecirculated to the member bodies for voting. Publication as an InternationalStandard requires approval by at least 75 % of the member bodies castinga vote.International Standard ISO 5782-2 was prepared by Technical CommitteeISO/TC 131, Fluid power systems, Subcommittee SC 5, Control productsand components.ISO 5782 consists of the following parts, under the general title Pneumaticfluid power — Compressed air filters:—Part 1: Main characteristics to be included in supplier's literature andproduct-marking requirements—Part 2: Test methods to determine the main characteristics to beincluded in supplier's literatureAnnex A of this part of ISO 5782 is for information only.SIST ISO 5782-2:2000



© ISOISO 5782-2:1997(E)iiiIntroductionIn pneumatic fluid power systems, power is transmitted and controlledthrough air under pressure within a circuit. Where mechanical filtration ofthe air media is desired, filters are components designed to remove solidand liquid contaminants from compressed air.SIST ISO 5782-2:2000



SIST ISO 5782-2:2000



INTERNATIONAL STANDARD
© ISOISO 5782-2:1997(E)1Pneumatic fluid power — Compressed air filters —Part 2:Test methods to determine the main characteristics to be includedin supplier's literature1
ScopeThis part of ISO 5782 specifies tests, procedures and a method of presenting the results concerning theparameters which define the main characteristics to be included in the supplier's literature of filtersconforming to ISO 5782-1.The scope of this part of ISO 5782 is—to facilitate the comparison of filters by standardizing test methods and presentation of test data;—to assist in the proper application of filters in compressed air systems.The tests specified are intended to allow comparison between the different type of filters; they are notproduction tests to be carried out on each filter manufactured.2
Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions ofthis part of ISO 5782. At the time of publication, the editions indicated were valid. All standards aresubject to revision, and parties to agreements based on this part of ISO 5782 are encouraged toinvestigate the possibility of applying the most recent editions of the standards indicated below.Members of IEC and ISO maintain registers of currently valid International Standards.ISO 3:1973,Preferred numbers — Series of preferred numbers.ISO 2944:1974,Fluid power systems and components — Nominal pressures.ISO 3448:1992,Industrial liquid lubricants — ISO viscosity classification.ISO 5598:1985,Fluid power systems and components — Vocabulary.ISO 5782-1:1997,Pneumatic fluid power — Compressed air filters — Part 1: Main characteristicsto be included in supplier's literature and product-marking requirements.ISO 6358:1989,Pneumatic fluid power — Components using compressible fluids — Determinationof flow-rate characteristics.3
DefinitionsFor the purposes of this part of ISO 5782, the definitions given in ISO 5598 and ISO 5782-1 apply.SIST ISO 5782-2:2000



ISO 5782-2:1997(E)© ISO24
UnitsUnits from ISO 1000 are generally used in pneumatic fluid power systems, in particular:—gauge pr
...

NORME ISO
INTERNATIONALE 5782-2
Première édition
1997-12-15
Transmissions pneumatiques — Filtres
pour air comprimé —
Partie 2:
Méthodes d'essai pour déterminer
les principales caractéristiques à inclure
dans la documentation des fournisseurs
Pneumatic fluid power — Compressed air filters —
Part 2: Test methods to determine the main characteristics to be included in
supplier's literature
A
Numéro de référence
ISO 5782-2:1997(F)

---------------------- Page: 1 ----------------------
ISO 5782-2:1997(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération
mondiale d'organismes nationaux de normalisation (comités membres de
l'ISO). L'élaboration des Normes internationales est en général confiée aux
comités techniques de l'ISO. Chaque comité membre intéressé par une
étude a le droit de faire partie du comité technique créé à cet effet. Les
organisations internationales, gouvernementales et non gouvernementales,
en liaison avec l'ISO, participent également aux travaux. L'ISO collabore
étroitement avec la Commission électrotechnique internationale (CEI) en
ce qui concerne la normalisation électrotechnique.
Les projets de Normes internationales adoptés par les comités techniques
sont soumis aux comités membres pour vote. Leur publication comme
Normes internationales requiert l'approbation de 75 % au moins des
comités membres votants.
La Norme internationale ISO 5782-2 a été élaborée par le comité technique
ISO/TC 131, Transmissions hydrauliques et pneumatiques, sous-comité
SC 5, Appareils de régulation et de distribution et leurs composants.
L'ISO 5782 comprend les parties suivantes, présentées sous le titre
général Transmissions pneumatiques — Filtres pour air comprimé:
— Partie 1: Principales caractéristiques à inclure dans la documentation
des fournisseurs et exigences de marquage du produit
— Partie 2: Méthodes d'essai pour déterminer les principales
caractéristiques à inclure dans la documentation des fournisseurs
L'annexe A de la présente partie de l'ISO 5782 est donnée uniquement à
titre d'information.
©  ISO 1997
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publi-
cation ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun pro-
cédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord
écrit de l'éditeur.
Organisation internationale de normalisation
Case postale 56 • CH-1211 Genève 20 • Suisse
Internet central@iso.ch
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Imprimé en Suisse
ii

---------------------- Page: 2 ----------------------
©
ISO ISO 5782-2:1997(F)
Introduction
Dans les systèmes de transmissions pneumatiques, l'énergie est transmise
et commandée par l'intermédiaire d'air sous pression circulant dans un
circuit. Lorsqu'une filtration mécanique de l'air est souhaitée, les filtres sont
des éléments destinés à retenir les polluants solides et liquides contenus
dans l'air comprimé.
iii

---------------------- Page: 3 ----------------------
©
NORME INTERNATIONALE  ISO ISO 5782-2:1997(F)
Transmissions pneumatiques — Filtres pour air comprimé —
Partie 2:
Méthodes d'essai pour déterminer les principales caractéristiques
à inclure dans la documentation des fournisseurs
1 Domaine d'application
La présente partie de l'ISO 5782 spécifie les essais, les modes opératoires et une méthode de
présentation des résultats relatifs aux paramètres qui définissent les principales caractéristiques à
inclure dans la documentation des fournisseurs de filtres, conformément à l'ISO 5782-1.
L'objet de la présente partie de l'ISO 5782 est
— de faciliter la comparaison des filtres en normalisant les méthodes d'essai et la présentation des
valeurs obtenues lors de ces essais;
— d'apporter une aide afin que les filtres soient correctement utilisés dans les systèmes d'air
comprimé.
Les essais spécifiés ont pour but de permettre la comparaison entre les différents types de filtres; il ne
s'agit en aucun cas d'essais de production à effectuer pour chaque filtre fabriqué.
2 Références normatives
Les normes suivantes contiennent des dispositions qui, par suite de la référence qui en est faite,
constituent des dispositions valables pour la présente partie de l'ISO 5782. Au moment de la publication,
les éditions indiquées étaient en vigueur. Toute norme est sujette à révision et les parties prenantes des
accords fondés sur la présente partie de l'ISO 5782 sont invitées à rechercher la possibilité d'appliquer
les éditions les plus récentes des normes indiquées ci-après. Les membres de la CEI et de l'ISO
possèdent le registre des Normes internationales en vigueur à un moment donné.
Nombres normaux — Séries de nombres normaux.
ISO 3:1973,
ISO 2944:1974, Transmissions hydrauliques et pneumatiques — Gamme de pressions
nominales.
ISO 3448:1992, Lubrifiants liquides industriels — Classification ISO selon la viscosité.
Transmissions hydrauliques et pneumatiques — Vocabulaire.
ISO 5598:1985,
ISO 5782-1:1997, Transmissions pneumatiques — Filtres pour air comprimé — Partie 1:
Principales caractéristiques à inclure dans la documentation des fournisseurs
et exigences de marquage du produit.
ISO 6358:1989,
Transmissions pneumatiques — Éléments traversés par un fluide
compressible — Détermination des caractéristiques de débit.
1

---------------------- Page: 4 ----------------------
©
ISO
ISO 5782-2:1997(F)
3 Définitions
Pour les besoins de la présente partie de l'ISO 5782, les définitions données dans l'ISO 5598 et
l'ISO 5782-1 s'appliquent.
4 Unités
Les unités de l'ISO 1000 sont généralement utilisées dans les transmissions pneumatiques, notamment:
— la pression relative, exprimée en kilopascals (entre parenthèses en bars);
— la température, exprimée en degrés Celsius;
— le débit, exprimé en décimètres cubes par seconde (ANR).
5 Conditions d'essai
5.1 Température
Pour tous les essais, la température de l'air traité, du matériel et de l'air ambiant doit être maintenue à
25 °C ± 10 °C.
5.2 Pressions
±
Les pressions spécifiées doivent être maintenues à 2 %. Les pressions d'essai préférentielles sont
celles données en 4.2.1 de l'ISO 5782-1:1997 ou dans l'ISO 2944. Lorsque d'autres pressions d'essai
sont requises, les valeurs doivent être choisies parmi les
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.