Small craft - Craft identification - Coding system (ISO 10087:2022)

This document establishes a coding system to achieve identification of any small craft in terms of:
a) identification code of the country of the manufacturer of the craft;
b) identification code of the manufacturer;
c) serial number;
d) month and year of manufacture;
e) model year.
This document is applicable to small craft of all types and materials, of hull length, LH, up to 24 m.

Kleine Wasserfahrzeuge - Schiffskörper-Kennzeichnung - Codierungssystem (ISO 10087:2022)

Petits navires - Identification du bateau - Système de codage (ISO 10087:2022)

Le présent document établit un système de codage permettant d’obtenir l'identification de tout petit navire en termes de :
a) code d'identification du pays du fabricant du bateau ;
b) code d'identification du fabricant ;
c) numéro de série ;
d) mois et année de fabrication ;
e) année modèle.
Il s’applique aux petits navires de tous types et matériaux, de longueur de coque LH inférieure ou égale à 24 m.

Mala plovila - Identifikacija plovila - Kodirni sistem (ISO 10087:2022)

Ta dokument določa kodirni sistem za identifikacijo katerega koli malega plovila, kar zadeva:
a) identifikacijsko kodo države proizvajalca plovila;
b) identifikacijsko kodo proizvajalca;
c) serijsko številko;
d) mesec in leto izdelave;
e) leto modela.
Ta dokument se uporablja za mala plovila vseh tipov in materialov z dolžino trupa (LH) največ 24 m.

General Information

Status
Published
Public Enquiry End Date
18-Nov-2021
Publication Date
23-Mar-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-Mar-2022
Due Date
28-May-2022
Completion Date
24-Mar-2022

Relations

Buy Standard

Standard
EN ISO 10087:2022
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 10087:2021
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10087:2022
01-maj-2022
Nadomešča:
SIST EN ISO 10087:2019
Mala plovila - Identifikacija plovila - Kodirni sistem (ISO 10087:2022)
Small craft - Craft identification - Coding system (ISO 10087:2022)
Kleine Wasserfahrzeuge - Schiffskörper-Kennzeichnung - Codierungssystem (ISO
10087:2022)
Petits navires - Identification du bateau - Système de codage (ISO 10087:2022)
Ta slovenski standard je istoveten z: EN ISO 10087:2022
ICS:
35.040.99 Drugi standardi v zvezi s Other standards related to
kodiranjem informacij information coding
47.080 Čolni Small craft
SIST EN ISO 10087:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10087:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 10087:2022


EN ISO 10087
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2022
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 10087:2019
English Version

Small craft - Craft identification - Coding system (ISO
10087:2022)
Petits navires - Identification du bateau - Système de Kleine Wasserfahrzeuge - Schiffskörper-
codage (ISO 10087:2022) Kennzeichnung - Codierungssystem (ISO 10087:2022)
This European Standard was approved by CEN on 23 December 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10087:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10087:2022
EN ISO 10087:2022 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10087:2022
EN ISO 10087:2022 (E)
European foreword
This document (EN ISO 10087:2022) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with Technical Committee CEN/TC 464 “Small Craft” the secretariat of which is
held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards
shall be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10087:2019.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10087:2022 has been approved by CEN as EN ISO 10087:2022 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 10087:2022
EN ISO 10087:2022 (E)
Annex ZA
(informative)

Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered
This European Standard has been prepared under a Commission’s standardization request
M/542/C(2015) 8736 final to provide one voluntary means of conforming to essential requirements of
Directive 2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 2013/53/EU
Essential Requirements of Clause(s)/sub-clause(s) Remarks/Notes
Directive 2013/53/EU of this EN
Annex I.A.2.1 - Watercraft All Clauses of this For compliance with Annex I.A.2.1 (2),
Identification standard except sub- the ‘unique identification code’ referred
clause 4.3 to in sub-clause 4.3 of this standard shall
mean the unique code of the
manufacturer and shall be assigned
according to the particular rules set out
in Commission Implementing Regulation
(EU) 2017/1 of 3 January 2017 on
procedures for watercraft identification
under Directive 2013/53/EU of the
European Parliament and of the Council
on recreational craft and personal
watercraft.
ANNEX V - Equivalent All Clauses of this In the case of post-construction
conformity based on post standard except sub- assessment referred to in Article 19 and
construction assessment clause 4.3 Article 23 of Directive 2013/53/EU, the
(Module PCA). Watercraft Identification Number
described in Annex I.A.2.1 (2) shall
comply with the provisions set out in
Annex V.4.3 of Directive 2013/53/EU
and the procedure according to Article 8
of Commission Implementing Regulation
(EU) 2017/1 of 3 January 2017.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
4

---------------------- Page: 6 ----------------------
SIST EN ISO 10087:2022
INTERNATIONAL ISO
STANDARD 10087
Fifth edition
2022-01
Small craft — Craft identification —
Coding system
Petits navires — Identification du bateau — Système de codage
Reference number
ISO 10087:2022(E)
© ISO 2022

---------------------- Page: 7 ----------------------
SIST EN ISO 10087:2022
ISO 10087:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 10087:2022
ISO 10087:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Composition of craft identification number . 2
5 Requirements . 3
5.1 Size . 3
5.2 Permanency of marking . 3
5.3 Location . 4
5.4 Duplicate identification number . 4
5.5 Time of marking . 4
5.6 Display format . 4
6 Additional information .
...

SLOVENSKI STANDARD
oSIST prEN ISO 10087:2021
01-november-2021
Mala plovila - Identifikacija plovila - Kodirni sistem (ISO/FDIS 10087:2021)
Small craft - Craft identification - Coding system (ISO/FDIS 10087:2021)
Kleine Wasserfahrzeuge - Schiffskörper-Kennzeichnung - Codierungssystem (ISO/FDIS
10087:2021)
Petits navires - Identification du bateau - Système de codage (ISO/FDIS 10087:2021)
Ta slovenski standard je istoveten z: prEN ISO 10087
ICS:
35.040.99 Drugi standardi v zvezi s Other standards related to
kodiranjem informacij information coding
47.080 Čolni Small craft
oSIST prEN ISO 10087:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10087:2021

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10087:2021
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10087
ISO/TC 188
Small craft — Craft identification —
Secretariat: SIS
Coding system
Voting begins on:
2021­08­30
Petits navires — Identification du bateau — Système de codage
Voting terminates on:
2021­11­22
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 10087:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2021

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10087:2021
ISO/FDIS 10087:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH­1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10087:2021
ISO/FDIS 10087:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Composition of craft identification number . 2
5 Requirements . 3
5.1 Size . 3
5.2 Permanency of marking . 3
5.3 Location . 4
5.4 Duplicate identification number . 4
5.5 Time of marking . 4
5.6 Display format . 4
6 Additional information . 4
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 5
Bibliography . 6
© ISO 2021 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 10087:2021
ISO/FDIS 10087:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 188, Small craft, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 464, Small craft, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This fifth edition cancels and replaces the fourth edition (ISO 10087:2019), of which it constitutes a
minor revision.
The main changes compared to the previous edition are as follows:
— Clause 2 has been updated;
— in 3.4, a reference to the source has been added;
— a note has been added in 4.5;
— a Bibliography has been added.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 10087:2021
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 10087:2021(E)
Small craft — Craft identification — Coding system
1 Scope
This document establishes a coding system to achieve identification of any small craft in terms of:
a) identification code of the country of the manufacturer of the craft;
b) identification code of the manufacturer;
c) serial number;
d) month and year of manufacture;
e) model year.
It applies to small craft of all types and materials, of hull length, L , up to 24 m.
H
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3166­1:2020, Codes for the representation of names of countries and their subdivisions — Part 1:
Country code
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at h
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.