SIST EN ISO 10601:2008

SLOVENSKI STANDARD
SIST EN ISO 10601:2008
01-september-2008
Sljudasti pigmenti železovega oksida za barve - Specifikacije in metode
preskušanja (ISO 10601:2007)
Micaceous iron oxide pigments for paints - Specifications and test methods (ISO
10601:2007)
Eisenglimmer-Pigmente für Beschichtungsstoffe - Anforderungen und Prüfverfahren (ISO
10601:2007)
Pigments d'oxyde de fer micacé pour peintures - Spécifications et méthodes d'essai (ISO
10601:2007)
Ta slovenski standard je istoveten z: EN ISO 10601:2008
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 10601:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 10601
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 87.060.10

English Version
Micaceous iron oxide pigments for paints - Specifications and
test methods (ISO 10601:2007)
Pigments d'oxyde de fer micacé pour peintures - Eisenglimmer-Pigmente für Beschichtungsstoffe -
Spécifications et méthodes d'essai (ISO 10601:2007) Anforderungen und Prüfverfahren (ISO 10601:2007)
This European Standard was approved by CEN on 12 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10601:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 10601:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 10601:2008 (E)
Foreword
The text of ISO 10601:2007 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 10601:2008 by
Technical Committee CEN/TC 298 “Pigments and extenders” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 10601:2007 has been approved by CEN as a EN ISO 10601:2008 without any modification.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 10601
Second edition
2007-03-01

Micaceous iron oxide pigments for
paints — Specifications and test methods
Pigments d'oxyde de fer micacé pour peintures — Spécifications
et méthodes d'essai



Reference number
ISO 10601:2007(E)
©
ISO 2007

---------------------- Page: 5 ----------------------

ISO 10601:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2007 – All rights reserved

---------------------- Page: 6 ----------------------

ISO 10601:2007(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 2
4 Classification. 2
5 Required characteristics and their tolerances . 2
6 Sampling. 3
7 Assessment of thin-flake content . 3
8 Test report. 4

© ISO 2007 – All rights reserved iii

---------------------- Page: 7 ----------------------

ISO 10601:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 10601 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 2,
Pigments and extenders.
This second edition cancels and replaces the first edition (ISO 10601:1993), which has been technically
revised.
The main technical changes are:
a) the description of the grades has been changed and the grade “non-lamellar” deleted;
b) the requirements for the residue on sieve have been changed.
iv © ISO 2007 – All rights reserved

---------------------- Page: 8 ----------------------

ISO 10601:2007(E)
Introduction
Micaceous iron oxide pigments were previously included in ISO
...