iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 312-4:1997

(Main)

Particleboards - Specifications - Part 4: Requirements for load-bearing boards for use in dry conditions

Particleboards - Specifications - Part 4: Requirements for load-bearing boards for use in dry conditions

This European standard specifies the requirements for load-bearing boards for use in dry conditions. NOTE: These boards are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing, and I-beams (see EN V 1995-1-1 and/or performance standards).

Spanplatten - Anforderungen - Teil 4: Anforderungen an Platten für tragende Zwecke zur Verwendung im Trockenbereich

Diese Europäische Norm legt Anforderungen an Platten für tragende Zwecke zur Verwendung im Trockenbereich fest. ANMERKUNG: Diese Platten sind zur Berechnung und Ausführung von tragenden oder aussteifenden Bauteilen vorgesehen, z. B. Wand-, Fußboden-, Dachkonstruktionen oder I-Trägern (siehe EN V 1995-1-1 und/oder Leistungsnormen).

Panneaux de particules - Exigences - Partie 4: Exigences pour panneaux travaillants utilisés en milieu sec

La présente norme européenne prescrit les exigences pour les panneaux de particules travaillants utilisés en milieu sec. NOTE: Ces panneaux sont destinés a etre utilisés dans la conception et la construction d'éléments de bâtiment travaillants ou raidisseurs, par exemple en mur, plancher, toiture ou poutre en I (voir EN V 1995-1-1 et/ou les normes de réalisation).

Iverne plošče - Specifikacije - 4. del: Zahteve za uporabo nosilnih plošč v suhih pogojih

General Information

Status
Withdrawn
Publication Date
31-Mar-1997
Withdrawal Date
31-Dec-2003
ICS
79.060.20 - Fibre and particle boards
Technical Committee
LII - Wood and wooden products
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jan-2004
Due Date
01-Jan-2004
Completion Date
01-Jan-2004
Directive
89/106/EEC - Construction products
Mandate
M/113 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on wood based panels
Ref Project
EN 312-4:1996 - Particleboards - Specifications - Part 4: Requirements for load-bearing boards for use in dry conditions

Relations

Replaced By
SIST EN 312:2004 - Particleboards - Specifications
Effective Date
01-Jan-2004

Buy Standard

EN 312-4:1997EN 312-4:1997
PreviousNext
Standard
EN 312-4:1997
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 312-4:1997
01-april-1997
,YHUQHSORãþH6SHFLILNDFLMHGHO=DKWHYH]DXSRUDERQRVLOQLKSORãþYVXKLK
SRJRMLK
Particleboards - Specifications - Part 4: Requirements for load-bearing boards for use in
dry conditions
Spanplatten - Anforderungen - Teil 4: Anforderungen an Platten für tragende Zwecke zur
Verwendung im Trockenbereich
Panneaux de particules - Exigences - Partie 4: Exigences pour panneaux travaillants
utilisés en milieu sec
Ta slovenski standard je istoveten z: EN 312-4:1996
ICS:
79.060.20 9ODNQHQHLQLYHUQHSORãþH Fibre and particle boards
SIST EN 312-4:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14322:2022(Main)
Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification
EN 14322:2021

This document specifies the surface requirements and dimensional tolerances for decorative melamine faced boards for interior use which are common for particleboards, extruded particleboards fibreboards and sandwich boards for furniture.
This document does not apply to boards laminated with so called priming foils or finish foils and laminates according to EN 438 1.
This document does not apply to laminate floor coverings.
Melamine faced wood-based boards in accordance with this document can be referred to as MFB.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14323:2022(Main)
Wood-based panels - Melamine faced boards for interior uses - Test methods
EN 14323:2021

This document specifies test methods for the determination of characteristics of melamine faced boards (MFB) as defined in EN 14322.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 622-4:2019(Main)
Fibreboards - Specifications - Part 4: Requirements for softboards
EN 622-4:2019

This document specifies the requirements for softboards as defined in EN 316, with a density ≥ 230 kg/m3 to 400 kg/m3.
The values listed in this document relate to product properties but they are not characteristic values to be used in design calculations.
NOTE   Panels which are intended for use exclusively as thermal insulating products are covered by EN 13171.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16368:2014(Main)
Lightweight Particleboards - Specifications
CEN/TS 16368:2014

CEN/TS 16368 specifies the requirements for uncoated particleboards for use in dry conditions in non load-bearing applications with density below 600 kg/m3. This Technical Specification applies to particleboard which is mostly homogenous and continuous in its composition and which does not contain hollow spaces, chambers or other type of cavities which can be encountered as honeycombs in sandwich panels or as tubes in extruded boards. This Technical Specification does not give requirements for extruded particleboards (see EN 14755), flaxboards (see EN 15197) and sandwich panels.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 320:2011(Main)
Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
EN 320:2011

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 312:2011(Main)
Particleboards - Specifications
EN 312:2010

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309. The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations. Additional information on supplementary properties for certain applications is also given. This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 622-5:2010(Main)
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
EN 622-5:2009

This European Standard specifies the requirements for dry process boards (MDF) as defined in EN 316. The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 316:2009(Main)
Wood fibre boards - Definition, classification and symbols
EN 316:2009

This European Standard gives the definition, classification and symbols for wood fibreboards.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 634-2:2007(Main)
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
EN 634-2:2007

This European Standard for cement-bonded particleboards specifies the requirements for particleboards bonded with Ordinary Portland Cement (OPC) for use in dry, humid ) and external ) conditions. Additional information on supplementary properties for certain applications is also given.
NOTE 1   Boards made with cement other than OPC may comply with this Standard if test values are declared according to EN 13986. However, further parts of EN 634 may be developed in the future to cover other types of cement or other materials.
NOTE 2   Cement-bonded particleboard does not contain any asbestos fibre.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300:2006(Main)
Oriented Strand Boards (OSB) - Definitions, classification and specifications
EN 300:2006

This European Standard applies to Oriented Strand Boards (OSB). It defines terms, establishes a
classification and specifies requirements.
The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.
NOTE   Test methods for determination of mechanical properties for structural purposes are given in EN 789.
Determination of characteristic values of mechanical properties and density for structural purposes is given in EN 1058. Design characteristic values for OSB are given in EN 12369-1.
Information on supplementary properties is given in Annex C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day