SIST EN ISO 8092-3:2000

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements (ISO 8092-3:1996)Straßenfahrzeuge - Steckverbindungen für das elektrische Fahrzeug-Bordnetz - Teil 3: Flachstecker für mehrpolige Steckverbindungen - Maße und besondere Anforderungen (ISO 8092-3:1996)Véhicules routiers - Connexions pour faisceaux de câblage électrique embarqués - Partie 3: Languettes pour raccordements multipolaires - Dimensions et exigences particulieres (ISO 8092-3:1996)Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements (ISO 8092-3:1996)43.040.10RSUHPDElectrical and electronic equipmentICS:Ta slovenski standard je istoveten z:EN ISO 8092-3:1999SIST EN ISO 8092-3:2000en01-december-2000SIST EN ISO 8092-3:2000SLOVENSKI
STANDARD



SIST EN ISO 8092-3:2000



SIST EN ISO 8092-3:2000



SIST EN ISO 8092-3:2000



SIST EN ISO 8092-3:2000



SIST EN ISO 8092-3:2000



INTERNATIONAL STANDARD IS0 8092-3 First edition 1996-02-o 1 Road vehicles - Connections for on-board electrical wiring harnesses - . Part 3: Tabs for multi-pole connections - Dimensions and specific requirements V6hicules routiers - Connexions pour faisceaux de &b/age 6lectrique embarques - Partie 3: Languettes pour raccordements multipolaires - Dimensions et exigences particulikres Reference number IS0 8092-3:1996(E) SIST EN ISO 8092-3:2000



IS0 8092-3: 1996(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (I EC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 8092-3 was prepared by Technical Committee lSO/TC 22, Road vehicles, Subcommittee SC 3, Electrica/ and electronic equipment. IS0 8092 consists of the following parts, under the general title Road ve- hicles - Connections for on-board electrical wiring harnesses: - Part 7: Tabs for requirements single-pole connections - Dimensions and specific - Part 2: Definitions, test methods and genera/ performance require- ments - Part 3: Tabs for requirements multi-pole connections - Dimensions and specific - Part 4: Pins for single- and multi-pole connections - and specific requiremen ts Dimensions 0 IS0 1996 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in
...