Aerospace series - Steel 30CrNiMo8 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm

This document specifies the requirements relating to: Steel 30CrNiMo8 (1.6580) 1 100 MPa ≤ Rm ≤ 1 300 MPa Forgings - De ≤ 100 mm for aerospace applications. W.nr: 1.6580 ASD-STAN designation: FE-PL74.

Luft- und Raumfahrt - Stahl 30CrNiMo8 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Schmiedestücke - De ≤ 100 mm

Dieses Dokument legt die Anforderungen an:
Stahl 30CrNiMo8 (1.6580)
1 100 MPa ≤ Rm ≤ 1 300 MPa
Schmiedestücke
De ≤ 100 mm
für Anwendungen in der Luft- und Raumfahrt fest.
W.-Nr.: 1.6580
ASD-STAN-Bezeichnung: FE-PL74.

Série aérospatiale - Acier 30CrNiMo8 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Pièces forgées ou matricées - De ≤ 100 mm

Le présent document spécifie les exigences relatives à :
Acier 30CrNiMo8 (1.6580)
1 100 MPa ≤ Rm ≤ 1 300 MPa
Pièces forgées ou matricées
De ≤ 100 mm
pour applications aérospatiales.
W.nr : 1.6580
Désignation ASD-STAN : FE-PL74.

Aeronavtika - Jeklo 30CrNiMo8 (1.6580) - 1100 MPa ≤ Rm ≤ 1300 MPa - Izkovki - De ≤ 100 mm

Ta dokument določa zahteve, ki se navezujejo na: jeklo 30CrNiMo8 (1.6580), 1100 MPa ≤ Rm ≤ 1300 MPa, izkovki, De ≤ 100 mm, za uporabo v aeronavtiki. Št. W.: 1.6580. Oznaka ASD-STAN: FE-PL74.

General Information

Status
Published
Publication Date
16-Dec-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Dec-2019
Due Date
16-Feb-2020
Completion Date
17-Dec-2019

Buy Standard

Standard
EN 2476:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2476:2020
01-februar-2020
Aeronavtika - Jeklo 30CrNiMo8 (1.6580) - 1100 MPa ≤ Rm ≤ 1300 MPa - Izkovki - De
≤ 100 mm
Aerospace series - Steel 30CrNiMo8 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Forgings
- De ≤ 100 mm
Luft- und Raumfahrt - Stahl 30CrNiMo8 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa -
Schmiedestücke - De ≤ 100 mm
Série aérospatiale - Acier 30CrNiMo8 (1.6580) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Pièces
forgées ou matricées - De ≤ 100 mm
Ta slovenski standard je istoveten z: EN 2476:2019
ICS:
49.025.10 Jekla Steels
77.140.85 Železni in jekleni kovani Iron and steel forgings
izdelki
SIST EN 2476:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2476:2020

---------------------- Page: 2 ----------------------
SIST EN 2476:2020


EN 2476
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version

Aerospace series - Steel 30CrNiMo8 (1.6580) - 1 100 MPa
≤ Rm ≤ 1 300 MPa - Forgings - De ≤ 100 mm
Série aérospatiale - Acier 30CrNiMo8 (1.6580) - 1 100 Luft- und Raumfahrt - Stahl 30CrNiMo8 (1.6580) - 1
MPa ≤ Rm ≤ 1 300 MPa - Pièces forgées ou matricées - 100 MPa ≤ Rm ≤ 1 300 MPa - Schmiedestücke - De ≤
100 mm
De ≤ 100 mm
This European Standard was approved by CEN on 4 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2476:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2476:2020
EN 2476:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliographie . 8

2

---------------------- Page: 4 ----------------------
SIST EN 2476:2020
EN 2476:2019 (E)
European foreword
This document (EN 2476:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be
withdrawn at the latest by June 2020.
Attention is drawn to the possibility that some of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.