Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing (ISO 10751:2016)

This standard describes a method intended to determine the resistance of a slide fastener to repeated opening and closing.  The method is applicable to all types of slide fastener with a chain length greater than 80 mm

Schuhe - Prüfverfahren für Reißverschlüsse - Beständigkeit gegen wiederholtes Öffnen und Schließen (ISO 10751:2016)

Diese Norm beschreibt ein Verfahren zur Bestimmung der Beständigkeit eines Reißverschlusses gegen wiederholtes Öffnen und Schließen. Das Verfahren gilt für sämtliche Arten von Reißverschlüssen mit einer Kettenlänge von mehr als 80 mm.

Chaussures - Méthodes d'essai pour les fermetures éclair - Résistance aux ouvertures et fermetures répétées (ISO 10751:2016)

ISO 10751:2016 décrit une méthode destinée à déterminer la résistance d'une fermeture à glissière aux ouvertures et fermetures répétées. Cette méthode s'applique à tous les types de fermetures à glissière ayant une longueur supérieure à 80 mm.

Obutev - Preskusne metode za zadrge - Odpornost proti ponavljajočemu se odpiranju in zapiranju (ISO 10751:2016)

Ta standard opisuje metodo za določanje odpornosti zadrge proti ponavljajočemu se odpiranju in zapiranju.  Metoda se uporablja za vse vrste zadrg, daljših od 80 mm.

General Information

Status
Published
Public Enquiry End Date
10-Mar-2016
Publication Date
07-Jun-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
31-May-2016
Due Date
05-Aug-2016
Completion Date
08-Jun-2016

Buy Standard

Standard
EN ISO 10751:2016
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 10751:2016
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10751:2016
01-julij-2016
2EXWHY3UHVNXVQHPHWRGH]D]DGUJH2GSRUQRVWSURWLSRQDYOMDMRþHPXVH
RGSLUDQMXLQ]DSLUDQMX ,62
Footwear - Test methods for slide fasteners - Resistance to repeated opening and
closing (ISO 10751:2016)
Schuhe - Prüfverfahren für Reißverschlüsse - Beständigkeit gegen wiederholtes Öffnen
und Schließen (ISO 10751:2016)
Chaussures - Méthodes d'essai pour les fermetures éclair - Résistance aux ouvertures et
fermetures répétées (ISO 10751:2016)
Ta slovenski standard je istoveten z: EN ISO 10751:2016
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
SIST EN ISO 10751:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10751:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 10751:2016


EN ISO 10751
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2016
EUROPÄISCHE NORM
ICS 61.060
English Version

Footwear - Test methods for slide fasteners - Resistance to
repeated opening and closing (ISO 10751:2016)
Chaussures - Méthode d'essai pour les fermetures à Schuhe - Prüfverfahren für Reißverschlüsse -
glissière - Résistance aux ouvertures et fermetures Beständigkeit gegen wiederholtes Öffnen und
répétées (ISO 10751:2016) Schließen (ISO 10751:2016)
This European Standard was approved by CEN on 15 April 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10751:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10751:2016
EN ISO 10751:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10751:2016
EN ISO 10751:2016 (E)
European foreword
This document (EN ISO 10751:2016) has been prepared by Technical Committee CEN/TC 309
“Footwear” the secretariat of which is held by AENOR, in collaboration with Technical Committee
ISO/TC 216 “Footwear”.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2016, and conflicting national standards
shall be withdrawn at the latest by November 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10751:2016 has been approved by CEN as EN ISO 10751:2016 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10751:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 10751:2016
INTERNATIONAL ISO
STANDARD 10751
First edition
2016-05-01
Footwear — Test methods for slide
fasteners — Resistance to repeated
opening and closing
Chaussures — Méthode d’essai pour les fermetures à glissière —
Résistance aux ouvertures et fermetures répétées
Reference number
ISO 10751:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------

SIST EN ISO 10751:2016
ISO 10751:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10751:2016
ISO 10751:2016(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
5 Apparatus and materials. 3
6 Preparation of test specimens . 4
7 Procedure. 5
8 Test report . 6
© ISO 2016 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 10751:2016
ISO 10751:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supple
...

SLOVENSKI STANDARD
kSIST FprEN ISO 10751:2016
01-marec-2016
2EXWHY3UHVNXVQHPHWRGH]D]DGUJH2GSRUQRVWSURWLSRQDYOMDMRþHPXVH
RGSLUDQMXLQ]DSLUDQMX ,62)',6
Footwear - Test methods for slide fasteners - Resistance to repeated opening and
closing (ISO/FDIS 10751:2016)
Schuhe - Prüfverfahren für Reißverschlüsse - Beständigkeit gegen wiederholtes Öffnen
und Schließen (ISO/FDIS 10751:2016)
Chaussures - Méthodes d'essai pour les fermetures éclair - Résistance aux ouvertures et
fermetures répétées (ISO/FDIS 10751:2016)
Ta slovenski standard je istoveten z: FprEN ISO 10751
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
kSIST FprEN ISO 10751:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

kSIST FprEN ISO 10751:2016

---------------------- Page: 2 ----------------------

kSIST FprEN ISO 10751:2016
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10751
ISO/TC 216
Footwear — Test methods for slide
Secretariat: AENOR
fasteners — Resistance to repeated
Voting begins on:
201601­ 14­ opening and closing
Voting terminates on:
Chaussures — Méthodes d’essai pour les fermetures éclair —
2016­03 ­14
Résistance aux ouvertures et fermetures répétées
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 10751:2015(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2015

---------------------- Page: 3 ----------------------

kSIST FprEN ISO 10751:2016
ISO/FDIS 10751:2015(E)

ISO/CEN PARALLEL PROCESSING
This final draft has been developed within the European Committee for Standardization (CEN), and processed
under the CEN-lead mode of collaboration as defined in the Vienna Agreement. The final draft was established
on the basis of comments received during a parallel enquiry on the draft.
This final draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel two-
month approval vote in ISO and two month formal vote in CEN.
Positive votes shall not be accompanied by comments.
Negative votes shall be accompanied by the relevant technical reasons.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------

kSIST FprEN ISO 10751:2016
ISO/FDIS 10751:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 3
5 Apparatus and materials. 3
6 Preparation of test specimens . 4
7 Procedure. 5
8 Test report . 6
Bibliography . 7
© ISO 2015 – All rights reserved iii

---------------------- Page: 5 ----------------------

kSIST FprEN ISO 10751:2016
ISO/FDIS 10751:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
ISO 10751 was prepared by the European Committee Standardization (CEN) Technical Committee
CEN/TC 309, Footwear, in collaboration with ISO Technical Committee TC 216, Footwear, in accordance
with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).
iv © ISO 2015 – All rights reserved

---------------------- Page: 6 ----------------------

kSIST FprEN ISO 10751:2016
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 10751:2015(E)
Footwear — Test methods for slide fasteners — Resistance
to repeated opening and closing
1 Scope
This International Standard describes a method intended to determine the resistance of a slide fastener
to repeated opening and closing. The method is applicable to all types of slide fastener with a teeth
length greater than 80 mm.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 18454, Footwear — Standard atmospheres for conditioning and testing of footwear and
components of footwear
ISO 19952, Footwear — Vocabulary
3 Terms a nd definiti ons
For the purposes of this document,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.