Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018, Corrected version 2018-05)

Standards 18541-1 to 4 are covering the field of light vehicles and 18541-5 will cover the field of heavy-duty motor vehicles.
The purpose is to treat specificities of mopeds and motorbikes, as well as all-terrain vehicles (quads) and other small vehicles with 3 or 4 wheels.

Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 6: Spezifische RMI Anwendungsfälle und Anfoderungen fü L-Kategorie Fahrzeuge (ISO 18541-6:2018, korrigierte Fassung 2018-05)

Dieses Dokument enthält alle Elemente (Definitionen, Anwendungsfälle, technische Anforderungen, Anforderungen an funktionale Nutzerschnittstellen und Konformitätsprüfungsfälle), die für den standardisierten Zugang zu Reparatur- und Wartungsinformationen für zwei- und dreirädrige Kraftfahrzeuge und leichte vierrädrige Kraftfahrzeuge (Kraftfahrzeuge der Fahrzeugklasse L) anwendbar sind.
Die Erarbeitung dieses Dokuments erfolgte auf der Grundlage von ISO 18541-1, ISO 18541-2, ISO 18541-3 und ISO 18541-4. Dieses Dokument stellt eine Anpassung der Festlegungen für den standardisierten Zugang zu RMI für Personenkraftwagen an Fahrzeuge der Fahrzeugklasse L dar, wobei die Ziele und Grundsätze des Normungsauftrages M/421 der Europäischen Kommission beibehalten wurden.
Dieses Dokument nimmt auf die Anwendung eines digitalen Anhangs genormter Suchbegriffe für RMI Bezug. Die Bereitstellung eines solchen digitalen Anhangs wird nach dem Verfahren erfolgen, das in ISO 18542 beschrieben wird.
CEN muss eine Registrierungsstelle zur Erstellung und Pflege eines geeigneten digitalen Anhangs nach ISO 18542 benennen.

Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et à la maintenance pour l'automobile (RMI) - Partie 6: Exigences et cas d'usage RMI spécifiques aux véhicules de catégorie L (ISO 18541-6:2018, Version corrigée 2018-05)

ISO 18541-6.2018 contient tous les éléments (définitions, cas d'utilisation, exigences techniques, exigences fonctionnelles relatives aux interfaces utilisateur et cas de test de conformité) applicables à l'accès normalisé aux informations relatives à la réparation et à la maintenance des véhicules à deux ou trois roues et des quadricycles (véhicules de catégorie L).
ISO 18541-6.2018 a été developpé en se fondant sur l'ISO 18541‑1, ISO 18541‑2, ISO 18541‑3 et ISO 18541‑4. Le présent document constitue une adaptation des spécifications relatives à l'accès normalisé aux RMI des voitures particulières aux véhicules de catégorie L, dans le respect des objectifs et des principes du mandat M/421 de la Commission européenne.
ISO 18541-6.2018 a fait référence à l'utilisation d'une annexe numérique de termes de recherche normalisés relatifs aux RMI.
La fourniture d'une telle annexe numérique va respecter le processus décrit dans l'ISO 18542. Le CEN va désigner une Autorité d'enregistrement conformément à l'ISO 18542 pour la création et la maintenance d'une annexe numérique appropriée.

Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju avtomobilov (RMI) - 6. del: Posebni primeri uporabe RMI in zahteve za vozila kategorije L (ISO 18541-6:2018, popravljena različica 2018-05)

Standardni od 18541-1 do 4 zajemajo področje lahkih vozil, standard 18541-5 pa bo zajemal področje težkih motornih vozil. Namen je obravnavati posebnosti mopedov in motornih koles ter terenskih vozila (štirikolesnikov) in druga manjša vozila s 3 ali 4 kolesi.

General Information

Status
Published
Public Enquiry End Date
29-Oct-2015
Publication Date
07-Mar-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Mar-2018
Due Date
10-May-2018
Completion Date
08-Mar-2018

Buy Standard

Standard
EN ISO 18541-6:2018 - BARVE
English language
167 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 18541-6:2018 - BARVE na PDF-str 28,29,30
English language
167 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 18541-6:2015 - BARVE
English language
190 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18541-6:2018
01-maj-2018
Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 6. del: Posebni primeri uporabe RMI in zahteve za vozila
kategorije L (ISO 18541-6:2018, popravljena različica 2018-05)
Road vehicles - Standardized access to automotive repair and maintenance information
(RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-
6:2018, Corrected version 2018-05)
Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 6:
Spezifische RMI Anwendungsfälle und Anfoderungen fü L-Kategorie Fahrzeuge (ISO
18541-6:2018, korrigierte Fassung 2018-05)
Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et
à la maintenance pour l'automobile (RMI) - Partie 6: Exigences et cas d'usage RMI
spécifiques aux véhicules de catégorie L (ISO 18541-6:2018, Version corrigée 2018-05)
Ta slovenski standard je istoveten z: EN ISO 18541-6:2018
ICS:
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
43.180 Diagnostična, vdrževalna in Diagnostic, maintenance and
preskusna oprema test equipment
SIST EN ISO 18541-6:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18541-6:2018

---------------------- Page: 2 ----------------------
SIST EN ISO 18541-6:2018


EN ISO 18541-6
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2018
EUROPÄISCHE NORM
ICS 43.040.15; 43.180
English Version

Road vehicles - Standardized access to automotive repair
and maintenance information (RMI) - Part 6: L-Category
vehicle specific RMI use cases and requirements (ISO
18541-6:2018, Corrected version 2018-05)
Véhicules routiers - Normalisation de l'accès aux Straßenfahrzeuge - Standardisierter Zugang zur
informations relatives à la réparation et à la Reparatur und Wartungsinformationen (RMI) - Teil 6:
maintenance pour l'automobile (RMI) - Partie 6: Spezifische RMI Anwendungsfälle und Anforderungen
Exigences et cas d'usage RMI spécifiques aux véhicules für L-Kategorie Fahrzeuge (ISO 18541-6:2018)
de catégorie L (ISO 18541-6:2018)
This European Standard was approved by CEN on 14 December 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18541-6:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 18541-6:2018
EN ISO 18541-6:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 18541-6:2018
EN ISO 18541-6:2018 (E)
European foreword
This document (EN ISO 18541-6:2018) has been prepared by Technical Committee ISO/TC 22 "Road
vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles”, the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall
be withdrawn at the latest by August 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18541-6:2018, Corrected version 2018-05 has been approved by CEN as EN ISO 18541-
6:2018 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 18541-6:2018

---------------------- Page: 6 ----------------------
SIST EN ISO 18541-6:2018
INTERNATIONAL ISO
STANDARD 18541-6
First edition
2018-02
Corrected version
2018-05
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) —
Part 6:
L-Category vehicle specific RMI use
cases and requirements
Véhicules routiers — Normalisation de l'accès aux informations
relatives à la réparation et à la maintenance pour l'automobile
(RMI) —
Partie 6: Exigences et cas d'usage RMI spécifiques aux véhicules de
catégorie L
Reference number
ISO 18541-6:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

Contents Page
Foreword .viii
Introduction .ix
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 8
4 Document overview and structure .10
5 General information .11
5.1 Access to vehicle RMI .11
5.2 Standardized access to RMI benefit examples .12
5.2.1 Independent operators .12
5.2.2 Vehicle manufacturers .13
5.3 L-Category and subcategories .13
5.4 Multi stage and RMI .13
6 Basic principles, use case and requirement overview .14
6.1 Basic principles.14
6.1.1 Basic principles for use case definition .14
6.1.2 Basic principles for requirements definition .15
6.1.3 Basic principles for functional user interface requirements definition .15
6.1.4 Basic principles for conformance test definition .15
6.2 Use case clusters .16
6.3 Requirements clusters .19
6.4 Functional user interface requirements clusters .22
6.5 Conformance test clustering .24
6.5.1 General.24
6.5.2 Main conformance test case clusters.24
7 Use cases .30
7.1 UC 1 User authentication, authorization and administration .30
7.1.1 UC 1.1 Register IO for use of the VM RMI system .30
7.1.2 UC 1.2 Register IO employee for use of the VM RMI system .31
7.1.3 UC 1.3 Maintain IO status .32
7.1.4 UC 1.4 Maintain user status .32
7.1.5 UC 1.5 Request to de-register IO employee .32
7.1.6 UC 1.6 Login to VM RMI system .33
7.1.7 UC 1.7 Grant access to security-related RMI .33
7.2 UC 2 Payment for RMI .34
7.3 UC 3 Vehicle identification .34
7.3.1 UC 3.1 Vehicle identification through product identifier .34
7.3.2 UC 3.2 Vehicle type identification via product features .35
7.4 UC 4 Provide selection methods for RMI .37
7.4.1 UC 4.1 Select information type .37
7.4.2 UC 4.2 Search by standardized terms .38
7.4.3 UC 4.3 Navigate using product structure .38
7.4.4 UC 4.4 Select by document identifier .38
7.5 UC 5 Retrieve information packages .39
7.5.1 UC 5.1 Workshop procedures .39
7.5.2 UC 5.2 Wiring diagrams .40
7.5.3 UC 5.3 Technical service bulletin .40
7.5.4 UC 5.4 Recall information .41
7.5.5 UC 5.5 Maintenance schedule .41
7.5.6 UC 5.6 Spare parts .42
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

7.5.7 UC 5.7 Accessories .42
7.5.8 UC 5.8 Labour times .43
7.5.9 UC 5.9 Special tools .44
7.5.10 UC 5.10 Type-approval related information .44
7.6 UC 6 Vehicle diagnostics .44
7.6.1 UC 6.1 DTC resolution .44
7.6.2 UC 6.2 VM symptom resolution .45
7.6.3 UC 6.3 Integrated diagnostics .45
7.7 UC 7 Updating and replacing modules (ECUs) .46
7.8 UC 8 Electronic Maintenance history .47
7.9 UC 9 Repair assistance technical support .47
7.10 UC 10 Request contact for specific RMI .47
7.10.1 UC 10.1 Electronic tool information (Diagnostic, Reprogramming, VCI) .47
7.10.2 UC 10.2 Test equipment and diagnostic tool manufacturers.48
7.10.3 UC 10.3 Training material (delegate information) .48
7.10.4 UC 10.4 Redistributors .49
7.10.5 UC 10.5 Republishers .49
7.10.6 UC 10.6 Inspection and testing services .50
7.10.7 UC 10.7 Alternative fuels retrofit systems .50
7.10.8 UC 10.8 Engine and components remanufacturing .50
7.10.9 UC 10.9 Component and parts manufacturers .51
7.10.10 UC 10.10 Validation of independently developed non-proprietary VCIs .51
7.11 UC 11 Courses and training information .52
8 Technical requirements .53
8.1 Requirements cluster 1 — Access-related data administration .53
8.1.1 [TREQ-1] General access-related data administration .53
8.1.2 Administration of IO and IO employee data by the VM .53
8.1.3 [TREQ-4] Administration of payment data by the VM .54
8.1.4 [TREQ-5] Administration of access event data by the VM .55
8.1.5 [TREQ-6] Administration of access event data to security-related RMI by
the VM .55
8.2 Requirements cluster 2 – IT architecture .56
8.2.1 [TREQ-7] Conceptual architecture .56
8.2.2 [TREQ-8] Implementation principles .57
8.3 Requirements cluster 3 – External interfaces .60
8.3.1 [TREQ-9] Vehicle communication interface (VCI) .60
8.3.2 [TREQ-10] Trust centre (certificate management).63
8.3.3 [TREQ-11] Parts ordering for security-related features .64
8.3.4 [TREQ-12] Partnered accessory provider systems.64
8.4 Requirements cluster 4 — Technical infrastructure .64
8.4.1 [TREQ-13] Type of device .64
8.4.2 [TREQ-14] Hardware features .65
8.4.3 [TREQ-15] Operating systems .65
8.4.4 [TREQ-16] Web browsers .65
8.4.5 [TREQ-17] Presentation formats for information packages .66
8.4.6 [TREQ-18] Internet connection .66
8.4.7 [TREQ-19] Performance of the VM RMI system .66
8.5 Requirements cluster 5 – Co-existence of VM software on IO client .67
8.5.1 [TREQ-20] Requirements for installing VM-specific software on the IO client .67
8.5.2 [TREQ-21] Requirements for updating of installed VM data and
applications on the IO client .68
8.5.3 [TREQ-22] Requirements for the operation of VM-specific software on
the IO client .68
8.5.4 [TREQ-23] Requirements for the uninstalling of VM-specific software on
the IO client .69
8.5.5 [TREQ-24] Requirements for restoring in case of an abnormal
termination of the VM-specific software on the IO client .69
8.6 Requirements cluster 6 – Operations .70
iv © ISO 2018 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

8.6.1 [TREQ-25] VM RMI system availability time .70
8.6.2 [TREQ-26] Support for the usage of the VM RMI system .70
8.6.3 [TREQ-27] Operation of the IO PC .71
8.7 [TREQ-28] Requirements cluster 7 – Functional user interface .71
9 Functional user interface requirements .72
9.1 General description .72
9.1.1 Navigational pathway from standardized use cases to VM-specific
navigation position .72
9.1.2 VM RMI system standardised navigation .73
9.2 Requirements cluster 8 — Standardized access mode .75
9.2.1 [FREQ-1] RMI access mode . .75
9.2.2 [FREQ-2] Registration and login support .76
9.3 Requirements cluster 9 — Use cases map .76
9.3.1 [FREQ-3] VM RMI system implemented use cases map .76
9.3.2 [FREQ-4] Download area .78
9.4 Requirements cluster 10 – Navigational pathway .78
9.4.1 [FREQ-5] Navigational pathway .78
10 Conformance test cases .79
10.1 Conformance test case — General structure . .79
10.1.1 Overview .79
10.1.2 Test case reference number and title [RMI-CT_.] [title] .79
10.1.3 Test purpose .79
10.1.4 Configuration .79
10.1.5 Preamble (setup state) .79
10.1.6 Test execution .79
10.1.7 Postamble.80
10.1.8 Result criteria .80
10.2 CT cluster 1 – Access-related data administration .80
10.2.1 [RMI-CT_TREQ-13, 14, 15, 16, 18, Annex B] Test client configuration .80
10.2.2 [RMI-CT_TREQ-17] Test presentation formats for information packages .81
10.3 CT cluster 2 — Test client’s external interfaces .82
10.3.1 [RMI-CT_TREQ-9] Test vehicle communication interface (VCI) .82
10.3.2 [RMI-CT_TREQ-11] Test parts ordering for security-related features .83
10.3.3 [RMI-CT_TREQ-12] Test partnered accessory provider systems .83
10.4 CT cluster 3 — Test user authentication, aut
...

SLOVENSKI STANDARD
SIST EN ISO 18541-6:2018
01-maj-2018
Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 6. del: Posebni primeri uporabe RMI in zahteve za vozila
kategorije L (ISO 18541-6:2018)
Road vehicles - Standardized access to automotive repair and maintenance information
(RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-
6:2018)
Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 6:
Spezifische RMI Anwendungsfälle und Anfoderungen fü L-Kategorie Fahrzeuge (ISO
18541-6:2018)
Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et
à la maintenance pour l'automobile (RMI) - Partie 6: Exigences et cas d'usage RMI
spécifiques aux véhicules de catégorie L (ISO 18541-6:2018)
Ta slovenski standard je istoveten z: EN ISO 18541-6:2018
ICS:
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
43.180 'LDJQRVWLþQDYGUåHYDOQDLQ Diagnostic, maintenance and
SUHVNXVQDRSUHPD test equipment
SIST EN ISO 18541-6:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 18541-6:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 18541-6:2018


EN ISO 18541-6
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2018
EUROPÄISCHE NORM
ICS 43.040.15; 43.180
English Version

Road vehicles - Standardized access to automotive repair
and maintenance information (RMI) - Part 6: L-Category
vehicle specific RMI use cases and requirements (ISO
18541-6:2018)
Véhicules routiers - Normalisation de l'accès aux Straßenfahrzeuge - Standardisierter Zugang zur
informations relatives à la réparation et à la Reparatur und Wartungsinformationen (RMI) - Teil 6:
maintenance pour l'automobile (RMI) - Partie 6: Spezifische RMI Anwendungsfälle und Anforderungen
Exigences et cas d'usage RMI spécifiques aux véhicules für L-Kategorie Fahrzeuge (ISO 18541-6:2018)
de catégorie L (ISO 18541-6:2018)
This European Standard was approved by CEN on 14 December 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18541-6:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 18541-6:2018
EN ISO 18541-6:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 18541-6:2018
EN ISO 18541-6:2018 (E)
European foreword
This document (EN ISO 18541-6:2018) has been prepared by Technical Committee ISO/TC 22 "Road
vehicles" in collaboration with Technical Committee CEN/TC 301 “Road vehicles”, the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall
be withdrawn at the latest by August 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 18541-6:2018 has been approved by CEN as EN ISO 18541-6:2018 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 18541-6:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 18541-6:2018
INTERNATIONAL ISO
STANDARD 18541-6
First edition
2018-02
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) —
Part 6:
L-Category vehicle specific RMI use
cases and requirements
Véhicules routiers — Normalisation de l'accès aux informations
relatives à la réparation et à la maintenance pour l'automobile
(RMI) —
Partie 6: Exigences et cas d'usage RMI spécifiques aux véhicules de
catégorie L
Reference number
ISO 18541-6:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

Contents Page
Foreword .viii
Introduction .ix
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 8
4 Document overview and structure .10
5 General information .11
5.1 Access to vehicle RMI .11
5.2 Standardized access to RMI benefit examples .12
5.2.1 Independent operators .12
5.2.2 Vehicle manufacturers .13
5.3 L-Category and subcategories .13
5.4 Multi stage and RMI .13
6 Basic principles, use case and requirement overview .14
6.1 Basic principles.14
6.1.1 Basic principles for use case definition .14
6.1.2 Basic principles for requirements definition .15
6.1.3 Basic principles for functional user interface requirements definition .15
6.1.4 Basic principles for conformance test definition .15
6.2 Use case clusters .16
6.3 Requirements clusters .19
6.4 Functional user interface requirements clusters .22
6.5 Conformance test clustering .24
6.5.1 General.24
6.5.2 Main conformance test case clusters.24
7 Use cases .30
7.1 UC 1 User authentication, authorization and administration .30
7.1.1 UC 1.1 Register IO for use of the VM RMI system .30
7.1.2 UC 1.2 Register IO employee for use of the VM RMI system .31
7.1.3 UC 1.3 Maintain IO status .32
7.1.4 UC 1.4 Maintain user status .32
7.1.5 UC 1.5 Request to de-register IO employee .32
7.1.6 UC 1.6 Login to VM RMI system .33
7.1.7 UC 1.7 Grant access to security-related RMI .33
7.2 UC 2 Payment for RMI .34
7.3 UC 3 Vehicle identification .34
7.3.1 UC 3.1 Vehicle identification through product identifier .34
7.3.2 UC 3.2 Vehicle type identification via product features .35
7.4 UC 4 Provide selection methods for RMI .37
7.4.1 UC 4.1 Select information type .37
7.4.2 UC 4.2 Search by standardized terms .38
7.4.3 UC 4.3 Navigate using product structure .38
7.4.4 UC 4.4 Select by document identifier .38
7.5 UC 5 Retrieve information packages .39
7.5.1 UC 5.1 Workshop procedures .39
7.5.2 UC 5.2 Wiring diagrams .40
7.5.3 UC 5.3 Technical service bulletin .40
7.5.4 UC 5.4 Recall information .41
7.5.5 UC 5.5 Maintenance schedule .41
7.5.6 UC 5.6 Spare parts .42
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

7.5.7 UC 5.7 Accessories .42
7.5.8 UC 5.8 Labour times .43
7.5.9 UC 5.9 Special tools .44
7.5.10 UC 5.10 Type-approval related information .44
7.6 UC 6 Vehicle diagnostics .44
7.6.1 UC 6.1 DTC resolution .44
7.6.2 UC 6.2 VM symptom resolution .45
7.6.3 UC 6.3 Integrated diagnostics .45
7.7 UC 7 Updating and replacing modules (ECUs) .46
7.8 UC 8 Electronic Maintenance history .47
7.9 UC 9 Repair assistance technical support .47
7.10 UC 10 Request contact for specific RMI .47
7.10.1 UC 10.1 Electronic tool information (Diagnostic, Reprogramming, VCI) .47
7.10.2 UC 10.2 Test equipment and diagnostic tool manufacturers.48
7.10.3 UC 10.3 Training material (delegate information) .48
7.10.4 UC 10.4 Redistributors .49
7.10.5 UC 10.5 Republishers .49
7.10.6 UC 10.6 Inspection and testing services .50
7.10.7 UC 10.7 Alternative fuels retrofit systems .50
7.10.8 UC 10.8 Engine and components remanufacturing .50
7.10.9 UC 10.9 Component and parts manufacturers .51
7.10.10 UC 10.10 Validation of independently developed non-proprietary VCIs .51
7.11 UC 11 Courses and training information .52
8 Technical requirements .53
8.1 Requirements cluster 1 — Access-related data administration .53
8.1.1 [TREQ-1] General access-related data administration .53
8.1.2 Administration of IO and IO employee data by the VM .53
8.1.3 [TREQ-4] Administration of payment data by the VM .54
8.1.4 [TREQ-5] Administration of access event data by the VM .55
8.1.5 [TREQ-6] Administration of access event data to security-related RMI by
the VM .55
8.2 Requirements cluster 2 – IT architecture .56
8.2.1 [TREQ-7] Conceptual architecture .56
8.2.2 [TREQ-8] Implementation principles .57
8.3 Requirements cluster 3 – External interfaces .60
8.3.1 [TREQ-9] Vehicle communication interface (VCI) .60
8.3.2 [TREQ-10] Trust centre (certificate management).63
8.3.3 [TREQ-11] Parts ordering for security-related features .64
8.3.4 [TREQ-12] Partnered accessory provider systems.64
8.4 Requirements cluster 4 — Technical infrastructure .64
8.4.1 [TREQ-13] Type of device .64
8.4.2 [TREQ-14] Hardware features .65
8.4.3 [TREQ-15] Operating systems .65
8.4.4 [TREQ-16] Web browsers .65
8.4.5 [TREQ-17] Presentation formats for information packages .66
8.4.6 [TREQ-18] Internet connection .66
8.4.7 [TREQ-19] Performance of the VM RMI system .66
8.5 Requirements cluster 5 – Co-existence of VM software on IO client .67
8.5.1 [TREQ-20] Requirements for installing VM-specific software on the IO client .67
8.5.2 [TREQ-21] Requirements for updating of installed VM data and
applications on the IO client .68
8.5.3 [TREQ-22] Requirements for the operation of VM-specific software on
the IO client .68
8.5.4 [TREQ-23] Requirements for the uninstalling of VM-specific software on
the IO client .69
8.5.5 [TREQ-24] Requirements for restoring in case of an abnormal
termination of the VM-specific software on the IO client .69
8.6 Requirements cluster 6 – Operations .70
iv © ISO 2018 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 18541-6:2018
ISO 18541-6:2018(E)

8.6.1 [TREQ-25] VM RMI system availability time .70
8.6.2 [TREQ-26] Support for the usage of the VM RMI system .70
8.6.3 [TREQ-27] Operation of the IO PC .71
8.7 [TREQ-28] Requirements cluster 7 – Functional user interface .71
9 Functional user interface requirements .72
9.1 General description .72
9.1.1 Navigational pathway from standardized use cases to VM-specific
navigation position .72
9.1.2 VM RMI system standardised navigation .73
9.2 Requirements cluster 8 — Standardized access mode .75
9.2.1 [FREQ-1] RMI access mode . .75
9.2.2 [FREQ-2] Registration and login support .76
9.3 Requirements cluster 9 — Use cases map .76
9.3.1 [FREQ-3] VM RMI system implemented use cases map .76
9.3.2 [FREQ-4] Download area .78
9.4 Requirements cluster 10 – Navigational pathway .78
9.4.1 [FREQ-5] Navigational pathway .78
10 Conformance test cases .79
10.1 Conformance test case — General structure . .79
10.1.1 Overview .79
10.1.2 Test case reference number and title [RMI-CT_.] [title] .79
10.1.3 Test purpose .79
10.1.4 Configuration .79
10.1.5 Preamble (setup state) .79
10.1.6 Test execution .79
10.1.7 Postamble.80
10.1.8 Result criteria .80
10.2 CT cluster 1 – Access-related data administration .80
10.2.1 [RMI-CT_TREQ-13, 14, 15, 16, 18, Annex B] Test client configuration .80
10.2.2 [RMI-CT_TREQ-17] Test presentation formats for information packages .81
10.3 CT cluster 2 — Test client’s external interfaces .82
10.3.1 [RMI-CT_TREQ-9] Test vehicle communication interface (VCI) .82
10.3.2 [RMI-CT_TREQ-11] Test parts ordering for security-related features .83
10.3.3 [RMI-CT_TREQ-12] Test partnered accessory provider systems .83
10.4 CT cluster 3 — Test user authentication, authorization and administration .84
10.4.1 [RMI-CT_UC1.1] Test to register IO for use of the VM RMI system .84
10.4.
...

SLOVENSKI STANDARD
oSIST prEN ISO 18541-6:2015
01-oktober-2015
Cestna vozila - Standardizirani dostop do informacij o popravilih in vzdrževanju
avtomobilov (RMI) - 6. del: Posebni primeri uporabe RMI in zahteve za vozila
kategorije L (ISO/DIS 18541-6:2015)
Road vehicles - Standardized access to automotive repair and maintenance information
(RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO/DIS
18541-6:2015)
Straßenfahrzeuge - Standardisierter Zugang zur Reparatur und Wartung (RMI) - Teil 6:
Spezifische RMI Anwendungsfälle und Anfoderungen fü L-Kategorie Fahrzeuge
(ISO/DIS 18541-6:2015)
Véhicules routiers - Normalisation de l'accès aux informations relatives à la réparation et
à la maintenance pour l'automobile (RMI) - Partie 6: Exigences et cas d'usage RMI
spécifiques aux véhicules de catégorie L (ISO/DIS 18541-6:2015)
Ta slovenski standard je istoveten z: prEN ISO 18541-6
ICS:
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
43.180 'LDJQRVWLþQDYGUåHYDOQDLQ Diagnostic, maintenance and
SUHVNXVQDRSUHPD test equipment
oSIST prEN ISO 18541-6:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 18541-6:2015

---------------------- Page: 2 ----------------------
oSIST prEN ISO 18541-6:2015
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18541-6
ISO/TC 22/SC 31 Secretariat: DIN
Voting begins on: Voting terminates on:
2015-08-06 2015-11-06
Road vehicles — Standardized access to automotive repair
and maintenance information (RMI) —
Part 6:
L-Category vehicle specific RMI use cases and requirements
Véhicules routiers — Normalisation de l’accès aux informations relatives à la réparation et à la
maintenance pour l’automobile (RMI) —
Partie 6: Exigences et cas d’usage RMI spécifiques aux véhicules de catégorie L
ICS: 43.040.15; 43.180
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the European Committee for Standardization
(CEN), and processed under the CEN lead mode of collaboration as defined in the
Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 18541-6:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6
Contents Page
Foreword . v
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 8
4 Document overview and structure . 9
5 General information . 10
5.1 Access to vehicle RMI . 10
5.2 Standardized access to RMI benefit examples . 12
5.3 L-Category and subcategories. . 12
5.4 Multi stage and RMI . 12
5.5 RMI obligations for manufacturers of systems, components and separate technical units . 14
6 Basic principles, use case and requirement overview . 14
6.1 Basic principles . 14
6.2 Use case clusters . 17
6.3 Requirements clusters . 24
6.4 Functional user interface requirements clusters . 27
6.5 Conformance test clustering . 28
7 Use cases . 33
7.1 UC 1 User authentication, authorization and administration . 33
7.2 UC 2 Payment for RMI . 38
7.3 UC 3 Vehicle identification . 39
7.4 UC 4 Provide selection methods for RMI . 44
7.5 UC 5 Retrieve information packages . 46
7.6 UC 6 Vehicle diagnostics . 54
7.7 UC 7 Updating and replacing modules (ECUs) . 56
7.8 UC 8 Electronic maintenance history . 57
7.9 UC 9 Repair assistance technical support . 57
7.10 UC 10 Request contact for specific RMI . 58
7.11 UC 11 Courses and training information . 64
8 Technical requirements . 65
8.1 Requirements cluster 1 – Access-related data administration. 65
8.2 Requirements cluster 2 – IT architecture . 68
8.3 Requirements cluster 3 – External interfaces . 74
8.4 Requirements cluster 4 – Technical infrastructure . 79
8.5 Requirements cluster 5 – Co-existence of MA software on IO client . 82
8.6 Requirements cluster 6 – Operations . 85
8.7 [TREQ-28] Requirements cluster 7 – Functional user interface . 86
9 Functional user interface requirements . 87
9.1 General description . 87
9.2 Requirements cluster 8 – Standardized access mode . 89
9.3 Requirements cluster 9 – Use cases map . 90
9.4 Requirements cluster 10 – Navigational pathway . 93
10 Conformance test cases . 94
10.1 Conformance test case – General structure . 94
© ISO 2015 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6
10.2 Result criteria . 95
10.3 CT cluster 1 – Access-related data administration . 95
10.4 CT cluster 2 – Test client's external interfaces. 97
10.5 CT cluster 3 – Test user authentication, authorization and administration . 100
10.6 CT cluster 4 – Test functional user interface implementation . 108
10.7 CT cluster 5 – Test payment for RMI. 113
10.8 CT cluster 6 –Test for vehicle identification . 114
10.9 CT cluster 7 – Test selection methods for RMI . 118
10.10 CT cluster 8 – Test retrieval of information packages . 122
10.11 CT cluster 9 – Test vehicle diagnostics . 138
10.12 CT cluster 10 – Test updating and replacing of modules (ECUs) . 141
10.13 CT cluster 11 – Test electronic maintenance history. 142
10.14 CT cluster 12 – Test repair assistance, technical support . 143
10.15 CT cluster 13 – Test request for contact information . 144
10.16 CT cluster 14 – Test courses and training information . 153
10.17 CT cluster 15 – Test data administration requirements. 154
10.18 CT cluster 16 – Test MA software installation on the IO client . 158
10.19 CT cluster 17 – Test MA RMI operations . 163
10.20 CT cluster 18 – Test trust centre (certificate management) . 164
Annex A (normative) Adopted elements from ISO 18541-1,-2,-3,-4 . 166
A.1 General . 166
A.2 Definitions . 166
A.3 Use cases . 169
A.4 Technical requirements . 171
A.5 Functional user interface requirements . 174
A.6 Conformance test cases . 174
Annex B (informative) PC specification . 182
B.1 PC specification – Hardware . 182
B.2 PC specification – Software . 182
Bibliography . 183


iv © ISO 2015 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 18541-6 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 31, and by
Technical Committee CEN/TC 301, Road vehicles in collaboration.
ISO 18541 consists of the following parts, under the general title Road vehicles — Standardized access to
automotive repair and maintenance information (RMI):
 Part 1: General information and use case definition
 Part 2: Technical requirements
 Part 3: Functional user interface requirements
 Part 4: Conformance test
 Part 5: Heavy duty specific provision
 Part 6: L-Category vehicle specific RMI use cases and requirements
Introduction
This standard includes the requirements to be fulfilled by Repair and Maintenance Information (RMI) systems
as applied by the
EUROPEAN COMMISSION - ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL, Consumer goods
- Automotive industry EC mandate M/421 [1]
"MANDATE TO THE EUROPEAN STANDARDIZATION ORGANISATIONS FOR STANDARDIZATION IN
THE FIELD OF VEHICLE OBD, REPAIR AND MAINTENANCE INFORMATION"
dated Brussels, 21 January 2008.
© ISO 2015 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6
This mandate relates to the EC type-approval system for vehicles falling into the scopes of Directives
2007/46/EC [4], 2002/24/EC [2] and 2003/37/EC [3] and, in particular, to requirements for access to vehicle
repair and maintenance information by independent operators.
The purpose of the EC Mandate M/421 [1] is to develop a standard or set of standards which specify the
requirements to provide "standardized access to repair and maintenance information (RMI)" for independent
operators.
This standard part covers the access to automotive repair and maintenance information for L-category
vehicles (two- or three-wheel vehicles and quadricycles) based on Regulation (EU) 168 / 2013 [4] and related
delegated and implementing acts.
The information included in this part of the standard derives from the legislative requirements on European
level in the field of repair and maintenance information and related security requirements and can be
referenced by legislation in other countries.

vi © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 18541-6:2015
DRAFT INTERNATIONAL STANDARD ISO/DIS 18541-6

Road vehicles — Standardized access to automotive repair and
maintenance information (RMI) — Part 6: L-Category vehicle
specific RMI use cases and requirements
1 Scope
ISO 18541-6 contains all elements - definitions, use cases, technical requirements, functional user interfaces
requirements and conformance test cases - applicable for the standardized access to repair and maintenance
information for two- and three-wheeled vehicles and quadricycles (L-category vehicles)
The development of this standard part has been based on parts 1, 2, 3 and 4 of ISO 18541. This standard part
constitutes an adaptation of standardized access to RMI prescriptions for passenger cars to L-category
vehicles keeping the objectives and principles of the mandate M/421 from the European commission.
This standard references the usage of a Digital Annex of standardized search terms for RMI. The provision of
such a Digital Annex shall follow the process described in ISO 18542 Road vehicles – Standardized RMI
terminology.
CEN shall nominate a Registration Authority according to ISO 18542 for the creation and maintenance of an
appropriate Digital Annex.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 18541-1: 2014, Road vehicles — Standardized access to automotive RMI — Part 1: General information
and use case definition
ISO 18541-2: 2014, Road vehicles — Standardized access to automotive RMI — Part 2: Technical
requirements
ISO 18541-3: 2014, Road vehicles — Standardized access to automotive RMI — Part 3: Functional user
interface requirements
ISO 18541-4: 2015, Road vehicles — Standardized access to automotive RMI — Part 4: Conformance test
ISO 18542: 2014, Road vehicles — Standardized repair and maintenance information (RMI) terminology, all
parts
ISO 22900-2, Road vehicles — Modular vehicle communication interface (MVCI) — Part 2: D-PDU API
SAE J2534-1, Recommended Practice for Pass-Thru Vehicle Programming
SAE J2534-2, Optional Pass-Thru Features
SERMI scheme, Scheme for accreditation, approval and authorization to access security-related repair and
maintenance information (created by the SERMI de-facto association), source: http://www.vehiclesermi.eu/
© ISO 2015 – All rights reserved
1

---------------------- Page: 9 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1.1
access levels
one of the levels of access to RMI. Two access levels are defined by this standard, an access to RMI-relevant
to security and another one to RMI not relevant to security
EXAMPLE One may consider an access to RMI-relevant to security and another one to RMI not relevant to security.
They represent two different access levels.
3.1.2
accessories
supplementary features and components selected by a vehicle owner to enhance safety, performance,
comfort, etc. and whose fitting does not impact the vehicle approval
3.1.3
alternate fuel
a type of fuel that is either gaseous at atmospheric temperature and pressure or substantially non-mineral oil
derived
3.1.4
alternative fuels retrofit systems
engine systems mounted on an already registered vehicle for the purpose of operation with alternative fuels
3.1.5
alternative fuels system manufacturer
manufacturer of an engine system operating with an alternative fuel
3.1.6
appropriate software level
applicable software version for the individual vehicle
3.1.7
authorized repairer
AR
a provider of repair and maintenance services for motor vehicles operating within the distribution system set
up by a supplier of motor vehicles; see Regulation (EC) 461/2010 article 1 (1)(c)
3.1.8
base vehicle
a type-approved motor vehicle used at the initial stage of a multi-stage type-approval process
Note 1 to entry: A base vehicle may be a complete or an incomplete vehicle.
3.1.9
certificate
an electronic document which uses a digital signature to bind a public key with an identity
3.1.10
complete vehicle
a vehicle which needs not to be completed in order to meet the relevant technical requirements for type-
approval according to Regulation (EU) 168/2013
© ISO 2015 – All rights reserved
2

---------------------- Page: 10 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6
3.1.11
completed vehicle
a vehicle, resulting from the process of multi-stage type-approval, which meets the relevant technical
requirements for type-approval according to Regulation (EU) 168/2013
Note 1 to entry: A completed vehicle is also a complete vehicle.
3.1.12
component
a device subject to the requirements of this Regulation (EU) 168 /2013 or any of the delegated or
implementing acts adopted pursuant to this Regulation, which is intended to be part of a vehicle and which
may be type- approved independently of a vehicle in accordance with this Regulation and the delegated or
implementing acts adopted pursuant to this Regulation where those acts make express provision for so doing
3.1.13
detailed diagnosis
a diagnostic process that identifies, with precision, potential malfunction causes
Note 1 to entry: A precise diagnosis may be achieved in several steps, whereby the user may be requested to perform
test actions on the vehicle or to enter symptoms.
3.1.14
diagnostic information
a description of an error or symptom and a list of potential causes or hints for further investigation to the same
level and content as provided to AR
3.1.15
diagnostic trouble code
DTC
a numeric or alphanumeric identifier which identifies or labels a malfunction
Note 1 to entry: Adopted from United Nations – Global Technical Regulation No.°5 [6].
3.1.16
electronic maintenance history
a digital information package with virtual stamps that confirms the execution of the prescribed maintenance
actions according to the MA's schedule
3.1.17
final manufacturer
manufacturer responsible for the type approval of a complete or completed vehicle in a multi-stage type-
approval
3.1.18
incomplete vehicle
a vehicle which must undergo at least one further stage of completion in order to meet the relevant technical
requirements of the Regulation (EU) 168 / 2013
3.1.19
independent operator
IO
undertakings other than authorized dealers and repairers which are directly or indirectly involved in the repair
and maintenance of motor vehicles, in particular repairers, manufacturers or distributors of repair equipment,
tools or spare parts, publishers of technical information, automobile clubs, roadside assistance operators,
operators offering inspection and testing services, operators offering training for installers, manufacturers and
repairers of equipment for alternative fuel vehicles
Note 1 to entry: Undertaking is to be understood as the company or legal entity.
© ISO 2015 – All rights reserved
3

---------------------- Page: 11 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6
3.1.20
IO approval
process by which, upon payment of a reasonable and proportionate fee, the CAB sanctions or approves a
legitimate commercial enterprise to engage in security-related RMI activities
3.1.21
IO authorization
process by which, upon payment of a reasonable and proportionate fee, the CAB assesses that an individual
employee of an approved IO complies with the requirements specified in this document and is entitled to be
given access to security-related RMI
Note 1 to entry: As part of this authorization, the individual employee will be allocated, upon payment of a [reasonable
and proportionate] fee, a secure hardware token containing a personal digital certificate and a PIN that will be supplied by
the Trust Centre.
3.1.22
IO legal representative
a natural person empowered to legally represent the IO in all aspects of the access to vehicle RMI
3.1.23
information package
a collection of information provided by the MA RMI system in response to a specific request
3.1.24
information type
a category, group or set of information
EXAMPLE Workshop procedures (for body repair, temporary repair, periodic technical inspection), wiring diagrams,
technical service bulletins, recall information and maintenance information.
3.1.25
integrated diagnostics
a process which interprets via an integrated application the memory content of ECUs and provides a
diagnostic and repair recommendation
Note 1 to entry: Diagnostic application and MA RMI system cooperate online, so technical information is provided
during the diagnostics process and used for the diagnostic steps.
3.1.26
IO employee
a natural person employed by the IO
3.1.27
maintenance history
history of the performed, prescribed actions for maintaining a vehicle
EXAMPLE Oil changes and other periodic maintenance.
3.1.28
maintenance schedule
a prescribed sequence of maintenance actions for a vehicle following the requirements of the manufacturer
3.1.29
manufacturer
MA
any natural or legal person who is responsible to the approval authority for all aspects of the type-approval or
authorisation process, for ensuring conformity of production and who is also responsible for market
surveillance concerns for the vehicles, systems, components and separate technical units produced, whether
© ISO 2015 – All rights reserved
4

---------------------- Page: 12 ----------------------
oSIST prEN ISO 18541-6:2015
ISO/DIS 18541-6
or not the natural or legal person is directly involved in all stages of the design and construction of the vehicle,
system, component or separate technical unit which is the subject of the approval process
Note 1 to entry: Adopted from Regulation (EU) 168/2013 [5].
3.1.30
manufacturer repair and maintenance information system
MA RMI system
the information system by which the manufacturer provides access to RMI through a website
3.1.31
Multi-stage vehicle
a complete vehicle manufactured and type-approved in two or more stages by usually different manufacturers
per stage
3.1.32
on-board diagnostics
OBD
a system on board of a vehicle or engine which has the capability of detecting malfunctions, and, if applicable,
of indicating their occurrence by means of an alert system, of identifying the likely area of the malfunctions by
means of information stored in computer memory, and/or communicating that information off-board
3.1.33
p-code
standardized DTC for powertrain errors according to ISO 15031-6
3.1.34
partnered accessories
accessories which have been tested, quality assured and certified by the MA and for which the MA assumes
product liability
3.1.35
potential repair descriptions
a list
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.