Textile child care articles - Safety requirements and test methods for children's cot duvets - Part 1: Duvet (excluding duvet covers)

This European Standard specifies requirements for the safety of children's cot duvets, excluding
removable duvet covers, used in the child’s sleeping environment (i.e. not under supervision), and
designed to provide sufficient warmth when sleeping in a cot or similar product (e.g. crib/cradle) in
which a child is contained. This document specifies requirements for cot duvets suitable for children up
to 36 months. Cot duvets with permanent decorative outer fabrics also known as cot quilts or coverlet
are also in the scope.
NOTE The informative Annex E lists topics of further investigations which might lead to necessary
improvement of the safety requirements of children's cot duvets.
The requirements for removable cot duvet covers are excluded from this document and are covered in
EN 16779-2.
If a part of the children's cot duvet is designed to offer additional function (e.g. play function), in
addition of the following requirements, this part will be subjected to safety requirements related to
relevant standards (see A.1).

Textile Artikel für Kleinkinder und Säuglinge - Sicherheitstechnische Anforderungen und Prüfverfahren für Kinderbettdecken - Teil 1: Bettdecken (ausgenommen Bettbezüge)

Diese Europäische Norm legt Anforderungen an die Sicherheit von Kinderbettdecken, ausgenommen abziehbare Bettbezüge, fest, die im Schlafumfeld des Kindes (d. h. nicht beaufsichtigt) verwendet werden und dafür gestaltet sind, dem in einem Kinderbett oder in einem ähnlichen Produkt (z. B. Krippe/Wiege) schlafenden Kind ausreichend Wärme zu bieten. Dieses Dokument legt Anforderungen an Kinderbettdecken für Kinder im Alter bis zu 36 Monaten fest. In den Anwendungsbereich fallen auch Kinderbettdecken mit dauerhaftem dekorativem Bezug, auch bekannt als Steppdecke oder Tagesdecke.
ANMERKUNG   Im informativen Anhang E sind Themen zu weiteren Untersuchungen aufgeführt, die zur notwendigen Verbesserung der sicherheitstechnischen Anforderungen an Kinderbettdecken führen können.
Die Anforderungen an abziehbare Kinderbettbezüge sind von diesem Dokument ausgenommen und werden in EN 16779 2 behandelt.
Wenn ein Teil des Kinderschlafsacks so gestaltet ist, dass er eine zusätzliche Funktion bietet (z.B. Spielfunktion), unterliegt dieser Teil zusätzlich zu den folgenden Anforderungen auch den sicherheitstechnischen Anforderungen der zutreffenden Normen.

Articles textiles de puériculture - Exigences de sécurité et méthodes d’essai pour les couettes pour lit d’enfant - Partie 1 : Couette (excluant les housses de couette)

Le présent projet de Norme européenne spécifie les exigences pour la sécurité des couettes pour lit d’enfant, à l’exclusion des housses de couette amovibles, utilisées dans l’environnement de sommeil de l’enfant (autrement dit hors surveillance) et conçues pour apporter une chaleur suffisante pendant le sommeil dans un lit d’enfant ou un produit similaire (berceau par exemple) dans lequel l’enfant est installé. Le présent document spécifie les exigences relatives aux couettes pour lit d’enfant adaptées aux enfants jusqu’à 36 mois. Les couettes pour lit d’enfant munies d’étoffes extérieures décoratives permanentes, aussi appelées couvertures piquées pour lit d’enfant ou couvre-lits, entrent également dans le domaine d’application.
NOTE   L’Annexe E, informative, présente des pistes de recherches complémentaires susceptibles de faire évoluer les exigences de sécurité des couettes pour lit d’enfant.
Le présent document ne traite pas des exigences concernant les housses de couette amovibles pour lit d’enfant. Celles-ci sont traitées dans le prEN 16779 2 (en préparation).
Si une partie d’une couette pour lit d’enfant est conçue pour permettre une fonction supplémentaire (fonction de jouer par exemple), en plus des exigences suivantes, cette partie sera soumise aux exigences de sécurité des normes correspondantes (voir A.1).

Tekstilni izdelki za otroke - Varnostne zahteve in preskusne metode za prešite odeje za otroško posteljico - 1. del: Prešite odeje (razen prevleke za odeje)

Ta evropski standard določa varnostne zahteve za prešite odeje za otroške posteljice, razen odstranljive prevleke za odeje, ki se uporabljajo v otrokovem spalnem okolju (tj. brez nadzora), ki so zasnovane za zagotavljanje zadostne toplote pri spanju v otroški posteljici ali podobnem izdelku (npr. zibelki), v katerem se nahaja otrok. Ta dokument določa zahteve za prešite odeje za otroške posteljice, primerne za otroke, stare do 36 mesecev. Prešite odeje za otroške posteljice s trajno dekorativno zunanjo tkanino, znane tudi kot pregrinjala, so tudi del področja uporabe tega standarda.
OPOMBA Informativni dodatek E navaja seznam tem za nadaljnje raziskave, ki lahko vodijo do nujnih izboljšav varnostnih zahtev za prešite odeje za otroške posteljice.
Zahteve za odstranljive prevleke za odeje niso del tega dokumenta in so obravnavane v standardu EN 16779-2.
Če je del prešite odeje za otroške posteljice zasnovan tako, da ponuja dodatno funkcijo (npr. predvajanje), za ta del poleg navedenih zahtev veljajo tudi varnostne zahteve ustreznih standardov (glejte A.1).

General Information

Status
Published
Public Enquiry End Date
06-Nov-2014
Publication Date
11-Sep-2018
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Jul-2018
Due Date
28-Sep-2018
Completion Date
12-Sep-2018

Buy Standard

Standard
EN 16779-1:2018
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tekstilni izdelki za otroke - Varnostne zahteve in preskusne metode za prešite odeje za otroško posteljico - 1. del: Prešite odeje (razen prevleke za odeje)Textile Artikel für Kleinkinder und Säuglinge - Sicherheitstechnische Anforderungen und Prüfverfahren für Kinderbettdecken - Teil 1: Bettdecken (ausgenommen Bettbezüge)Articles textiles de puériculture - Exigences de sécurité et méthodes d’essai pour les couettes pour lit d’enfant - Partie 1 : Couette (excluant les housses de couette)Textile child care articles - Safety requirements and test methods for children's cot duvets - Part 1: Duvet (excluding duvet covers)97.190Otroška opremaEquipment for children97.160Tekstilije za dom. PeriloHome textiles. LinenICS:Ta slovenski standard je istoveten z:EN 16779-1:2018SIST EN 16779-1:2018en,fr,de01-oktober-2018SIST EN 16779-1:2018SLOVENSKI
STANDARD



SIST EN 16779-1:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16779-1
August
t r s z ICS
{ yä s x râ
{ yä s { r English Version
Textile child care articles æ Safety requirements and test methods for children 5s cot duvets æ Part
sã Duvet Articles textiles de puériculture æ Exigences de sécurité et méthodes d 5essai pour les couettes pour lit à nacelle
Textile Artikel für Kleinkinder und Säuglinge æ Sicherheitstechnische Anforderungen und Prüfverfahren für Kinderbettdecken æ Teil
sã This European Standard was approved by CEN on
z February
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x y y {æ sã t r s z ESIST EN 16779-1:2018



EN 16779-1:2018 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Requirements and test methods . 9 4.1 Design characteristics (see A.2) . 9 4.1.1 General . 9 4.1.2 Cot duvet ensemble . 9 4.1.3 Threads (including cot duvet seams) . 9 4.1.4 Labels . 10 4.1.5 Embellishments . 10 4.1.6 Fabrics and filling materials . 10 4.1.7 Slide fasteners . 10 4.2 Mechanical and physical hazards (see A.3) . 11 4.2.1 Entrapment of fingers and toes, ischemia . 11 4.2.2 Small part aspiration or ingestion, internal asphyxiation (choking) . 12 4.2.3 Cutting, puncture, abrasion . 13 4.3 Chemical hazards (see A.4) . 13 4.3.1 Migration of certain substances . 13 4.3.2 Formaldehyde . 14 4.3.3 Flame retardants . 14 4.4 Thermal hazards - hypothermia and hyperthermia (see A.5) . 15 4.4.1 General . 15 4.4.2 Requirements . 15 4.4.3 Test method . 15 4.5 Fire hazards (see A.6) . 15 4.6 Hygiene hazards (see A.7) . 15 4.6.1 Requirements and methods . 15 5 User information . 16 5.1 General . 16 5.2 Marking . 16 5.3 Purchase information . 17 5.4 Instruction for use . 17 5.5 Plastic packaging . 18 Annex A (informative)
Rationale . 19 A.1 General . 19 A.2 Design hazards . 19 A.3 Mechanical and physical hazards . 21 A.3.1 Hazards of entrapment of fingers and toes, ischemia . 21 A.3.2 Hazards of strangulation . 21 SIST EN 16779-1:2018



EN 16779-1:2018 (E) 3 A.3.3 Hazards of internal asphyxiation (choking) by aspiration, or ingestion of small parts . 21 A.3.4 Hazards of external asphyxiation (suffocation) . 22 A.3.5 Hazards of cutting, puncture, abrasion . 22 A.4 Chemical hazards . 22 A.4.1 Hazards related to harmful substances . 22 A.4.2 Hazards related to migration of certain substances . 23 A.4.3 Hazards related to formaldehyde . 23 A.5 Thermal hazards (Hyperthermia and hypothermia) . 23 A.6 Fire hazards . 24 A.7 Hygiene hazards . 24 A.7.1 Washable (see 4.6.1.1) . 24 A.7.2 Clean and free from infestation and foreign materials (see 4.6.1.2) . 24 A.7.3 Feather filled products (see 4.6.1.3) . 24 A.7.4 Used recycled fibres (see 4.6.1.4) . 25 Annex B (informative)
Supplementary information on thermal hazards . 26 B.1 Background information. 26 B.2 Thermal resistance measurement . 26 B.3 Rationale for guidance to the purchaser and/or user . 27 B.4 Relationship between thermal resistance and thickness or mass per unit area (surface density) . 28 Annex C (informative)
Specific marking, purchase information and user instruction . 30 Annex D (informative)
Guidance for the cot duvet dimensions . 31 Annex E (informative)
Topics for further investigations . 32 E.1 Thermal comfort . 32 E.2 Cot duvet characteristics . 32 Annex F (informative)
A–deviations . 33 Bibliography . 34 SIST EN 16779-1:2018



EN 16779-1:2018 (E) 4 European foreword This document (EN 16779-1:2018) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2019, and conflicting national standards shall be withdrawn at the latest by February 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Following the publication and implementation of this document in CEN member countries, it has been agreed by CEN TC 248 that there should be an 18 month transition period from the date of availability to allow manufacturers to develop and produce garments that conform to the standard. This period is also to allow the supply chain, from manufacturer through to the consumer, to be cleared of non-conforming children's cot duvets. EN 16779 is composed with the following parts: — Textile child care articles — Safety requirements and test methods for children's cot duvets — Part 1: Duvet (excluding duvet covers) [the present document; currently at Formal Vote stage]; — Textile child care use articles — Safety requirements and test methods for children's cot duvets —Part 2: Duvet covers (excluding duvets) [currently in preparation]. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16779-1:2018



EN 16779-1:2018 (E) 5 Introduction The European Commission Mandate M/497, followed by Product and Service safety in the Directorate-General Health and Consumers, under the title “Standardisation mandate to CEN, CENELEC and ETSI on the safety of child-care articles; Cluster 2- risks in the sleeping environment; Mattresses for cots, cot bumpers, suspended beds for children, duvets for children, sleep bags for children”, issued on 2011-10-20 and accepted by CEN/BT on 2011-12-20, requested that CEN develop standards or specifications including safety requirements and test methods, warnings and instructions to adult users in order to address the possible hazard posed by these products. The aim of this European Standard is to minimize the main risks posed by products in the sleep environment of babies and young children, such as: — internal asphyxiation (choking); — entrapment; — hyperthermia (overheating); — strangulation; — external asphyxiation (suffocation); — flammability; — injuries due to ingestion of small parts; — injuries due to chemicals. For the development of this document, attention was paid to: — the child’s stages of development (age, height, weight, ability, etc.); cot duvets were studied in relation to children up to 3 years of age; — the intended or foreseeable use of the cot duvet, bearing in mind a child’s behaviour; such behaviour exposes children to injury in ways that differ from those of adults, making children a particularly vulnerable group in society; — the hazard presented by the cot duvet in the circumstances under which the cot duvet and the child come into contact with each other. IMPORTANT — In order to comply with the essential safety requirements, this document is hazard based. As this document only deals with a particular textile child-care article, i.e. children's cot duvets, design characteristics have been specified only when necessary in order to introduce inherently safe design. These characteristics have been specified in a manner which allows compliance to be checked by interested parties, from designers to market surveillance authority officers. SIST EN 16779-1:2018



EN 16779-1:2018 (E) 6 1 Scope This European Standard specifies requirements for the safety of children's cot duvets, excluding removable duvet covers, used in the child’s sleeping environment (i.e. not under supervision), and designed to provide sufficient warmth when sleeping in a cot or similar product (e.g. crib/cradle) in which a child is contained. This document specifies requirements for cot duvets suitable for children up to 36 months. Cot duvets with permanent decorative outer fabrics also known as cot quilts or coverlet are also in the scope. NOTE The informative Annex E lists topics of further investigations which might lead to necessary improvement of the safety requirements of children's cot duvets. The requirements for removable cot duvet covers are excluded from this document and are covered in EN 16779-2. If a part of the children's cot duvet is designed to offer additional function (e.g. play function), in addition of the following requirements, this part will be subjected to safety requirements related to relevant standards (see A.1). 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-3:2013,1 Safety of toys - Part 3: Migration of certain elements EN 1103, Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour EN 1162, Feather and down - Test methods - Determination of the oxygen index number EN 1164, Feather and down - Test methods - Determination of the turbidity of an aqueous extract EN 12935, Feather and down - Hygiene and cleanliness requirements EN 16732:2015, Slide fasteners (zips) - Specification EN ISO 105-E01, Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01) EN ISO 139, Textiles - Standard atmospheres for conditioning and testing (ISO 139) EN ISO 6330, Textiles - Domestic washing and drying procedures for textile testing (ISO 6330) EN ISO 11092, Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092) EN ISO 14184-1, Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1) EN ISO 17226-1, Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography (ISO 17226-1)
1 Impacted by EN 71-3:2013+A2:2017 SIST EN 16779-1:2018



EN 16779-1:2018 (E) 7 ISO 105-F10, Textiles — Tests for colour fastness — Part F10: Specification for adjacent fabric: Multifibre ISO 4915, Textiles — Stitch types — Classification and terminology ISO 5085-1, Textiles — Determination of thermal resistance — Part 1: Low thermal resistance ISO 7000, Graphical symbols for use on equipment — Registered symbols 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses:
IEC Electropedia: available at http://www.electropedia.org/
ISO Online browsing platform: available at http://www.iso.org/obp 3.1 cot duvet bedding item intended to cover the child’s body, consisting of a filling material permanently sewn into a textile cover intended to be used with or without duvet cover in the cot or in a similar product Note 1 to entry:
The terms “cot quilt” or “coverlet” are interchangeable with “cot duvet”. 3.2 cot duvet cover removable bedding item intended to envelop cot duvet(s) 3.3 cot bed for a child consisting of a base and enclosed by high sides to prevent the child from falling out 3.4 harm injury or damage to the health of people [SOURCE: ISO/IEC Guide 51:2014, 3.1, modified - “or damage to property or the environment” has been deleted.] 3.5 hazard potential source of harm (3.4) [SOURCE: ISO/IEC Guide 51:2014, 3.2] 3.6 risk combination of the probability of occurrence of harm (3.4) and the severity of that harm [SOURCE: ISO/IEC Guide 51:2014, 3.9, modified — Note 1 to entry has been deleted.] SIST EN 16779-1:2018



EN 16779-1:2018 (E) 8 3.7 inherently safe design measures taken to eliminate hazards (3.5) and/or to reduce risks (3.6) by changing the design or operating characteristics of the product or system [SOURCE: ISO/IEC Guide 51:2014, 3.5] 3.8 asphyxiation insufficient supply of air to the airways Note 1 to entry:
Insufficient supply of air could be caused e.g. by closing off the flow of air as a result of choking or suffocation or by entrapment in an unventilated, confined space. [SOURCE: EN 71-1:2014, 3.3] 3.9 choking closing off the flow of air as a result of internal asphyxiation Note 1 to entry:
Choking can, for example, be caused by inhalation of an object, by an object becoming wedged in the mouth or pharynx, or by an object becoming lodged over the entrance to the lower airways. [SOURCE: EN 71-1:2014, 3.9] 3.10 suffocation closing off the flow of air as a result of airway obstruction external to the mouth and nose [SOURCE: EN 71-1:2014, 3.59] 3.11 cord cord, chain, ribbon, string or tape of any textile or non-textile material, including elastic material 3.12 monofilament thread single thread of man-made fibre 3.13 burr roughness, caused by not cleanly severing or finishing the material [SOURCE: EN 71-1:2014, 3.6] 3.14 surface flash rapid spread of flame over the surface of a material without ignition of its basic structure [SOURCE: ISO 4880:1997, 63, Note 1 to entry: “However, if the latter occurs simultaneously or sequentially with surface flash, it is not considered as a part of surface flash.”] SIST EN 16779-1:2018



EN 16779-1:2018 (E) 9 3.15 three dimensional embellishment decorative item attached to a cord that is thicker and/or wider than the cord itself [SOURCE: EN 14682:2014, 2.21] 4 Requirements and test methods NOTE Rationales for the inclusion of some of the requirements given in this document are given in Annex A. Table A.1 summarizes the relation between the design characteristics (4.1), and the hazards (4.2 to 4.6). 4.1 Design characteristics (see A.2) 4.1.1 General 4.1.1.1 Children's cot duvets shall not be designed, manufactured or supplied with drawstrings or cords (see A.3.2). 4.1.1.2 Children's cot duvets shall not have any pockets (see A.2.3), 4.1.1.3 Maximum dimensions: 120 cm x 140 cm (see A.2.2 and Annex D), measured on cot duvet lying flat and without pretension. 4.1.1.4 Children's cot duvets shall not be manufactured with plastic transfer (e.g. plastic print) or coated fabrics (see A.3.4). 4.1.1.5 Children's cot duvets shall not be designed, manufactured or supplied with magnetic components (see A.3.3.3.). 4.1.2 Cot duvet ensemble An ensemble of two or more individual and separable cot duvets shall be designed so that the child cannot slide between the individual cot duvets (e.g. ensemble combined and inserted into a single cot duvet cover which shall then be closed). 4.1.3 Threads (including cot duvet seams) 4.1.3.1 Single thread chain stitches, as described in ISO 4915, are not permitted (see A.3.1.1). 4.1.3.2 Seams shall have a seam allowance (distance between the fabric edge and sewing line) of no less than 5 mm (see A.3.3.2). 4.1.3.3 Seams shall be sewn so as to meet one of the following conditions (see A.3.3.2): a) a minimum of 10 stitches per 3 cm; b) if fewer than 10 stitches per 3 cm is used then the seam shall be tested as follows: Use clamps with jaws to which discs with a diameter of 19 mm are affixed. Attach the clamps not less than 30 mm apart and equidistant to the seam. Gradually apply a force of (70 ± 2) N between the two clamps over a period of approximately 5 s. Maintain the force for 10 s. Apply the test to this seam only once. Determine whether the front part of the 12 mm probe (see Figure 1) can be inserted through any one opening in the seam, using a maximum force of 10 N. NOTE Decorative stitches and quilting stitches are excluded from this requirement. SIST EN 16779-1:2018



EN 16779-1:2018 (E) 10
Figure 1 — Test Probe for seams 4.1.3.4 For exposed faces of the article, the maximum length of uncut float threads or uncut stitches shall be 10 mm, and the maximum length for cut threads or cut stitches shall be 20 mm (see A.3.1.2). 4.1.3.5 Monofilament threads shall not be used (see A.3.1.2, A.3.5.). 4.1.4 Labels 4.1.4.1 Labels shall not be attached on the cot duvet either in form of a loop (loop label), nor in a way they may create a loop when the cot duvet is used (see A.3.1.1, A.3.1.2). 4.1.4.2 Heat sealed or laser cut materials shall not have sharp edges (see A.3.5.). NOTE
Test methods are referred in 4.2.3.2. 4.1.4.3 The ends of labels or the edge of raw edge fabric shall be secured to prevent unravelling (see A.3.1.2). The security of the ends of the labels can be confirmed by carrying out a tactile inspection. 4.1.4.4 Labels with free end shall have no more than 75 mm in length (see A.3.2). 4.1.5 Embellishments 4.1.5.1 There shall be no three dimensional embellishments, such as pom-poms, tassels, beads, sequins, diamantés, glitter prints (e.g. plastic glue glitter and spread over glitter) or cords on children's cot duvets (see A.3.3.1). 4.1.5.2 There shall be no embellishments on slide fastener puller. 4.1.6 Fabrics and filling materials Fabrics and filling materials shall not contain any hard, sharp or foreign objects (i.e. any items which are not intended to be present such as needle, staple, nail, unattached press fastener, wood splinter, or insect or other infestation) (see A.3.5.). NOTE Test methods are referred in 4.2.3.2. 4.1.7 Slide fasteners 4.1.7.1 Requirements 4.1.7.1.1 Slide fasteners shall comply with EN 16732:2015, at least the performance requirements of code C and with the requirements of Table 2, as stated in EN 16732:2015. 4.1.7.1.2 The top stops and the elements (teeth) shall be free from burrs and sharp edges (see A.3.5.). Where components of a slide fastener could come into contact with the skin, the use of a plastic slide fastener with plastic top stops and bottom stops is recommended, in preference to a slide fastener with claw-type metal stops. SIST EN 16779-1:2018



EN 16779-1:2018 (E) 11 NOTE Test methods are referred to in 4.1.7.2. 4.1.7.1.3 Slide fasteners shall not have a removable slider. 4.1.7.1.4 Slide fasteners shall include a top stop (see A.3.3.1) and either a bottom stop or be secured in a manner so that the slider cannot be removed from the chain. Claw type stops are not recommended. 4.1.7.1.5 Slide fasteners with slider locking device shall be used. 4.1.7.2 Test method Slide fastener characteristics shall be carried out in accordance with the test methods as described in EN 16732:2015. The absence of a removable slider may be confirmed by manual inspection. The presence of the top stop and the bottom stop may be confirmed by visual inspection. 4.2 Mechanical and physical hazards (see A.3) 4.2.1 Entrapment of fingers and toes, ischemia 4.2.1.1 Requirements When tested in accordance with 4.2.1.2:
there shall be no openings in any textile materials including loop, mesh, knitted fabric and lace that allow the conical probe for mesh to penetrate to the 7 mm diameter section (see A.3.1.1);
there shall be no completely bounded openings in rigid materials between 5mm and 12mm, unless the depth is less than 10 mm (see A.3.1.1). 4.2.1.2 Test method The test probes shall be made from plastic or other smooth, hard material, which can be mounted on a force measuring device. Check whether the conical probe for mesh (Figure 2) with an applied force of up to 30 N enters into a mesh hole to the 7 mm section. Dimensions in millimetres
Figure 2 — Conical probe for mesh Check whether the 5 mm test probe (Figure 3) with an applied force of up to 30 N, enters 10 mm or more into any completely bounded circular openings in rigid materials, in any possible orientation. SIST EN 16779-1:2018



EN 16779-1:2018 (E) 12 Dimensions in millimetres
Figure 3 — Test Probes for openings in rigid materials If the 5 mm test probe enters 10 mm or more, then the 12 mm test probe (Figure 1) shall also enter 10 mm or more with an applied force of up to 5 N. 4.2.2 Small part aspiration or ingestion, internal asphyxiation (choking) 4.2.2.1 Requirements Cot duvets shall not contain attached component
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.