iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 295-1:1996

(Main)

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements

Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements

This standard specifies the performance criteria for the internal pressure strength, the external pressure strength, the longitudinal bending strength, the crushing resistance, the tightness, the resistance to abrasion and the permeability to pollutants of pipes used for waste liquid (above all water) transport. This standard includes the corresponding test methods and the evaluation of conformity of the product to this standard.

Steinzeugrohre und Formstücke sowie Rohrverbindungen für Abwasserleitungen und -kanäle - Teil 1: Anforderungen

Dieser Teil dieser Europäischen Norm legt Anforderungen fest für Steinzeugrohre und Formstücke mit flexiblen Verbindungen mit oder ohne Muffen zum Bau von Abwasserleitungen und -kanälen. Diese werden in der Regel zwar als Freispiegelleitungen betrieben; für Rohre und Formstücke nach dieser Norm ist jedoch ein zeitweiser Überdruck zulässig.

Tuyaux et accessoires en gres et assemblages de tuyaux pour les réseaux de branchement et d'assainissement - Partie 1: Exigences

Cette partie de la présente norme européenne définit les exigences auxquelles doivent satisfaire les tuyaux et raccords en gres a joint souple, avec ou sans manchon, destinés a la construction de réseaux d'évacuation et d'assainissement. Bien que les tuyaux et accessoires, couverts par cette norme, fonctionnent normalement par gravité, ils peuvent toutefois accepter des mises en pression temporaires.

Keramične cevi, fazonski kosi in spoji za odvod odpadne vode in kanalizacijo - 1. del: Zahteve

General Information

Status
Withdrawn
Publication Date
30-Nov-1996
Withdrawal Date
13-May-2013
ICS
23.040.50 - Pipes and fittings of other materials
93.030 - External sewage systems
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-May-2013
Due Date
05-Jun-2013
Completion Date
14-May-2013
Directive
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
EN 295-1:1991 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements

Relations

Amended By
SIST EN 295-1:1996/A2:1998 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
Effective Date
22-Dec-2008
Amended By
SIST EN 295-1:1996/A1:1998 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
Effective Date
22-Dec-2008
Replaced By
SIST EN 295-1:2013 - Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
Effective Date
13-Feb-2013
Amended By
SIST EN 295-1:1996/A3:2000 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
Effective Date
22-Dec-2008
Amended By
SIST EN 295-1:1996/A1:1998 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
Effective Date
08-Jun-2022
Replaced By
SIST EN 295-1:2013 - Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
Effective Date
08-Jun-2022
Amended By
SIST EN 295-1:1996/A3:2000 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
Effective Date
08-Jun-2022
Amended By
SIST EN 295-1:1996/A2:1998 - Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
Effective Date
08-Jun-2022
Revised
SIST EN 295-1:2013 - Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
Effective Date
01-Jul-2010

Buy Standard

EN 295-1:1996EN 295-1:1996
PreviousNext
Standard
EN 295-1:1996
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 295-1:1996
01-december-1996
.HUDPLþQHFHYLID]RQVNLNRVLLQVSRML]DRGYRGRGSDGQHYRGHLQNDQDOL]DFLMR
GHO=DKWHYH
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1:
Requirements
Steinzeugrohre und Formstücke sowie Rohrverbindungen für Abwasserleitungen und -
kanäle - Teil 1: Anforderungen
Tuyaux et accessoires en gres et assemblages de tuyaux pour les réseaux de
branchement et d'assainissement - Partie 1: Exigences
Ta slovenski standard je istoveten z: EN 295-1:1991
ICS:
23.040.50 Cevi in fitingi iz drugih Pipes and fittings of other
materialov materials
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST EN 295-1:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 295-1:1996

---------------------- Page: 2 --------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TP CEN/TR 16626:2014(Main)
Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures
CEN/TR 16626:2014

CEN/TR 16626 gives guidance for the assessment of conformity of vitrified clay pipe systems for drains and sewers including pipes, fittings, manholes, perforated pipes, jacking pipes and associated products by the establishment of voluntary third-party certification procedures. It is recommended that the quality management system conforms to or is no less stringent than the relevant requirements to EN ISO 9001.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 295-1:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints
EN 295-1:2013

This European Standard specifies requirements for vitrified clay pipes, fittings and flexible joints for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure. This standard also specifies requirements for rubber, polyurethane and polypropylene materials and other components used for jointing clay pipes and fittings. This standard specifies different strength classes, systems of joint dimensions, lengths and fittings. This standard does not apply to special fittings, adaptors and compatible accessories, perforated pipes and fittings, manholes and inspection chambers and pipes and joints for pipe jacking, which are specified in other parts of the standard series EN 295.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 295-5:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings
EN 295-5:2013

This European Standard specifies requirements for perforated pipes and compatible fittings made from vitrified clay with or without sockets for the construction of land drains and drainage of waste tips. They are also used for percolation into the ground. This standard specifies different strength classes and areas of perforations.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 295-7:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
EN 295-7:2013

This European Standard specifies requirements for vitrified clay pipes and joints for pipe jacking for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure. Pipe jacking techniques include micro-tunnelling, pipe-eating, pipe bursting and where appropriate lining with discrete pipes. This standard also specifies requirements for rubber, polyurethane, polypropylene, stainless steel and other materials used for joints for pipe jacking.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 295-6:2013(Main)
Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers
EN 295-6:2013

This European Standard applies for components for vitrified clay manholes and inspection chambers for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure. It specifies different strength classes and heights of sections. It also specifies the requirements for components used for joints, systems of joint dimensions and the materials rubber, polyurethane and polypropylene used for joints.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 295-4:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
EN 295-4:2013

This European Standard specifies requirements for adaptors and connectors made from vitrified clay and/or other suitable materials for use with vitrified clay pipes and fittings for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure. Adaptors and connectors include insertable fittings, sealing rings for cut pipes and heat-shrinkable sleeves. This standard also applies for metal banded flexible couplings and adaptors and specifies requirements for rubber, polyurethane, stainless steel and other components used for them.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 295-2:2013(Main)
Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
EN 295-2:2013

This European Standard specifies requirements for the evaluation of conformity of products manufactured from vitrified clay and other materials(referred to as "products") specified in the following standards:
- pipes, fittings and joints according to EN 295-1;
- adapters, connectors and flexible couplings according to EN 295-4;
- perforated pipes and fittings according to EN 295-5;
- components of manholes and inspection chambers according to EN 295-6; and
- pipes and joints for pipe jacking according to EN 295-7.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 295-3:2012(Main)
Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
EN 295-3:2012

This part of this European Standard is the specification for the methods of test for requirements of EN 295-1. Note: Where reference is made to clauses in EN 295-1 it is clearly stated.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1916:2003/AC:2008(Corrigendum)
Concrete pipes and fittings, unreinforced, steel fibre and reinforced
EN 1916:2002/AC:2008

TC Correction of Figure I.1 (this third Corrigendum to EN 1916:2002 contains the text of AC1, AC2 and AC3)

  • Corrigendum
    24 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1916:2003(Main)
Concrete pipes and fittings, unreinforced, steel fibre and reinforced
EN 1916:2002

This European Standard specifies performance requirements as defined in table 1 and describes test methods for precast concrete pipes and fittings, unreinforced, steel fibre and reinforced, with flexible joints (with seals either integrated in the units or supplied separately) and nominal sizes not exceeding DN 3200 for units with a circular bore or WN/HN 1400/2100 for units with an egg-shaped bore, for which the main intended use is the conveyance of sewage, rainwater and surface water under gravity or occasionally at low head of pressure, in pipelines that are generally buried.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day