SIST EN ISO 14175:2008

Oznaka standarda: SIST EN ISO 14175:2008
Koda projekta: 00121443
Organizacija: SIST
Naslov (angleški): Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
Naslov (slovenski): Pomožni materiali za varjenje - Plini in plinske mešanice za obločno varjenje in sorodne postopke (ISO 14175:2008)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN ISO 14175:2008 angleški jezik Active SIST-D: 48.40 EUR
PDF
Papir
Tehnični odbor: VAR - Varjenje
ICS: 25.160.20 71.100.20
Status: Objavljen
Objavljen: 01-jun-2008
Refer. št. objave: Sporočila 2008-06
Področje projekta (angleško): This International Standard specifies requirements for the classification of gases and gas mixtures used in fusion welding and allied processes including, but not limited to: - tungsten arc welding (Process 141); - gas-shielded metal arc welding (Process 13); - plasma arc welding (Process 15); - plasma arc cutting (Process 83); - laser welding (Process 52); - laser cutting (Process 84); - arc braze welding (Process 972). The purpose of this International Standard is to classify and designate shielding, backing, process and assist gases in accordance with their chemical properties and metallurgical behaviour as the basis for correct selection by the user and to simplify the possible qualification procedures. Gas purities and mixing tolerances are specified as delivered by the supplier (manufacturer) and not at the point of use. Gases or gas mixtures may be supplied in either liquid or gaseous form, but when used for welding and allied processes, the gases are always used in the gaseous form. Fuel gases, such as acetylene, natural gas, propane, etc., and resonator gases, as used in gas lasers, are not covered by this International Standard. Transportation and handling of gases and containers shall be in accordance with local, national and regional standards and regulations as required.
Povezava na standarde
Povezava Ime Datum
Nadomešča SIST EN 439:1995 - Dodajni materiali za varjenje - Zaščitni plini za obločno varjenje in rezanje 01-jun-2008


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi