Technical product documentation - Lettering - Part 1: General requirements (ISO 3098-1:2015)

This part of ISO 3098 specifies the general requirements for lettering, in accordance with the other parts
of ISO 3098, to be used in technical product documentation (in particular on technical drawings). It
includes basic conventions as well as rules for the application of lettering using the following techniques:
a) free-hand lettering (by means of an underlaid “grid”);
b) templates and manual lettering instruments;
c) dry transfer systems;
d) numerically controlled lettering and draughting systems.

Technische Produktdokumentation - Schriften - Teil 1: Grundregeln (ISO 3098-1:2015)

Documentation technique de produits - Écriture - Partie 1: Prescriptions générales (ISO 3098-1:2015)

L'ISO 3098-1:2015 fixe, en conformité avec les autres parties de l'ISO 3098, les exigences générales d'écriture devant être appliquées dans le domaine de la documentation technique de produits (en particulier aux dessins techniques). Elle comprend des principes conventionnels de base, ainsi que des règles relatives à l'écriture mettant en oeuvre les techniques suivantes: écriture à main levée (au moyen d'un quadrillage «caché en arrière-plan» - sorte de grille typomatique); gabarits de dessin et instruments pour écriture à la main; décalcomanies à sec; systèmes d'écriture et de dessin à commande numérique.

Tehnična dokumentacija izdelkov - Pisava - 1. del: Splošne zahteve (ISO 3098-1:2015)

Ta del standarda ISO 3098 določa splošne zahteve za pisavo, v skladu z drugimi deli standarda ISO 3098, ki se uporablja v tehnični dokumentaciji izdelkov (zlasti na tehničnih risbah). Vključuje osnovne konvencije in pravila za pisavo pri uporabi naslednjih tehnik:
a) prostoročno pisanje (s podlago iz »mreže«);
b) predloge in ročni instrumenti za pisanje;
c) suhi sistemi za prenos;
d) numerično krmiljeno pisanje in skicirni sistemi.

General Information

Status
Published
Public Enquiry End Date
30-Nov-2014
Publication Date
30-Mar-2015
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Mar-2015
Due Date
16-May-2015
Completion Date
31-Mar-2015

Relations

Buy Standard

Standard
EN ISO 3098-1:2015
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 3098-1:2014
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3098-1:2015
01-maj-2015
1DGRPHãþD
SIST EN ISO 3098-0:1998
7HKQLþQDGRNXPHQWDFLMDL]GHONRY3LVDYDGHO6SORãQH]DKWHYH ,62

Technical product documentation - Lettering - Part 1: General requirements (ISO 3098-
1:2015)
Technische Produktdokumentation - Schriften - Teil 1: Grundregeln (ISO 3098-1:2015)
Documentation technique de produits - Écriture - Partie 1: Prescriptions générales (ISO
3098-1:2015)
Ta slovenski standard je istoveten z: EN ISO 3098-1:2015
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
01.140.10 3LVDQMHLQSUHþUNRYDQMH Writing and transliteration
SIST EN ISO 3098-1:2015 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3098-1:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 3098-1:2015

EUROPEAN STANDARD
EN ISO 3098-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2015
ICS 01.100.01 Supersedes EN ISO 3098-0:1997
English Version
Technical product documentation - Lettering - Part 1: General
requirements (ISO 3098-1:2015)
Documentation technique de produits - Écriture - Partie 1: Technische Produktdokumentation - Schriften - Teil 1:
Exigences générales (ISO 3098-1:2015) Grundregeln (ISO 3098-1:2015)
This European Standard was approved by CEN on 12 December 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3098-1:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3098-1:2015
EN ISO 3098-1:2015 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3098-1:2015
EN ISO 3098-1:2015 (E)
Foreword
This document (EN ISO 3098-1:2015) has been prepared by Technical Committee ISO/TC 10 “Technical
product documentation” in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2015, and conflicting national standards shall be
withdrawn at the latest by September 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3098-0:1997.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3098-1:2015 has been approved by CEN as EN ISO 3098-1:2015 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 3098-1:2015

---------------------- Page: 6 ----------------------

SIST EN ISO 3098-1:2015
INTERNATIONAL ISO
STANDARD 3098-1
Second edition
2015-03-01
Technical product documentation —
Lettering —
Part 1:
General requirements
Documentation technique de produits — Écriture —
Partie 1: Exigences générales
Reference number
ISO 3098-1:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 3098-1:2015
ISO 3098-1:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 3098-1:2015
ISO 3098-1:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 2
5 Dimensions . 2
5.1 Nominal size . 2
5.2 Location of central lines . 3
5.3 Range of nominal sizes . 4
5.4 Lettering angle . 5
5.5 Types of lettering . 5
5.6 Underlined and overlined texts or text fields . 7
6 Designation . 8
Bibliography . 9
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 3098-1:2015
ISO 3098-1:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 10, Technical product documentation,
Subcommittee SC 1, Basic conventions. This second edition of ISO 3098-1 cancels and replaces the first
edition of ISO 3098-0:1997, of which it constitutes a minor revision.
ISO 3098 consists of the following parts, under the general title Technical product documentation — Lettering:
— Part 1: General requirements
— Part 2: Latin alphabet, numerals and marks
— Part 3: Greek alphabet
— Part 4: Diacritical and particular marks for the Latin alphabet
— Part 5: CAD letter
...

SLOVENSKI STANDARD
kSIST FprEN ISO 3098-1:2014
01-november-2014
7HKQLþQDGRNXPHQWDFLMDL]GHONRY3LVDYDGHO6SORãQH]DKWHYH ,62)',6

Technical product documentation - Lettering - Part 1: General requirements (ISO/FDIS
3098-1:2014)
Technische Produktdokumentation - Schriften - Teil 1: Grundregeln (ISO/FDIS 3098-
1:2014)
Documentation technique de produits - Écriture - Partie 1: Prescriptions générales
(ISO/FDIS 3098-1:2014)
Ta slovenski standard je istoveten z: FprEN ISO 3098-1 rev
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
01.140.10 3LVDQMHLQSUHþUNRYDQMH Writing and transliteration
kSIST FprEN ISO 3098-1:2014 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN ISO 3098-1:2014

---------------------- Page: 2 ----------------------
kSIST FprEN ISO 3098-1:2014
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 3098-1
ISO/TC 10/SC 1
Technical product documentation —
Secretariat: ANSI
Lettering —
Voting begins on:
2014-09-11
Part 1:
Voting terminates on:
General requirements
2014-11-11
Documentation technique de produits — Écriture —
Partie 1: Prescriptions générales
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 3098-1:2014(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2014

---------------------- Page: 3 ----------------------
kSIST FprEN ISO 3098-1:2014
ISO/FDIS 3098-1:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 4 ----------------------
kSIST FprEN ISO 3098-1:2014
ISO/FDIS 3098-1:2014(E)

ISO/CEN PARALLEL PROCESSING
This final draft has been developed within the International Organization for Standardization (ISO), and pro-
cessed under the ISO-lead mode of collaboration as defined in the Vienna Agreement. The final draft was
established on the basis of comments received during a parallel enquiry on the draft.
This final draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
two-month approval vote in ISO and formal vote in CEN.
Positive votes shall not be accompanied by comments.
Negative votes shall be accompanied by the relevant technical reasons.
© ISO 2014 – All rights reserved iii

---------------------- Page: 5 ----------------------
kSIST FprEN ISO 3098-1:2014
ISO/FDIS 3098-1:2014(E)

Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 2
5 Dimensions . 2
5.1 Nominal size . 2
5.2 Location of central lines . 3
5.3 Range of nominal sizes . 4
5.4 Lettering angle . 5
5.5 Types of lettering . 5
5.6 Underlined and overlined texts or text fields . 7
6 Designation . 8
Bibliography . 9
iv © ISO 2014 – All rights reserved

---------------------- Page: 6 ----------------------
kSIST FprEN ISO 3098-1:2014
ISO/FDIS 3098-1:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 10, Technical product documentation,
Subcommittee SC 1, Basic conventions. This second edition of ISO 3098-1 cancels and replaces the first
edition of ISO 3098-0:1997, of which it constitutes a minor revision.
ISO 3098 consists of the following parts, under the general title Technical product documentation —
Lettering:
— Part 1: General requirements
— Part 2: Latin alphabet, numerals and marks
— Part 3: Greek alphabet
— Part 4: Diacritical and particular marks for the Latin alphabet
— Part 5: CAD lettering of the Latin alphabet, numerals and marks
— Part 6: Cyrillic alphabet
© ISO 2014 – All rights reserved v

---------------------- Page: 7 ----------------------
kSIST FprEN ISO 3098-1:2014
ISO/FDIS 3098-1:2014(E)

vi © ISO 2014 – All rights reserved

---------------------- Page: 8 ----------------------
kSIST FprEN ISO 3098-1:2014
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 3098-1:2014(E)
Technical product documentation — Lettering —
Part 1:
General requirements
1 Scope
This part of ISO 3098 specifies the general requirements for lettering, in accordance with the other parts
of ISO 3098, to be used in technical product documentation (in particular on technical drawings). It
includes basic conventions as well as rules for the application of lettering using the following techniques:
a) free-hand lettering (by means of an underlaid “grid”);
b) templates and manual lettering instruments;
c) dry transfer systems;
d) numerically controlled lettering and draughting systems.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.