SIST EN 12012-3:2002+A1:2008

Oznaka standarda: SIST EN 12012-3:2002+A1:2008
Koda projekta: 00145060
Organizacija: SIST
Naslov (angleški): Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
Naslov (slovenski): Stroji za predelavo gume in plastike - Drobilni stroji - 3. del: Varnostne zahteve za drobilnike
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 12012-3:2002+A1:2008 angleški jezik Active SIST-F: 65.34 EUR
PDF
Papir
Tehnični odbor: VSN - Varnost strojev in naprav
ICS: 83.200
Status: Objavljen
Objavljen: 01-nov-2008
Refer. št. objave: Sporočila 2008-11
Referenčna oznaka: EN 12012-3:2001+A1:2008
Področje projekta (angleško): This standard specifies the essential safety requirements applicable to the design and construction of shredders used for plastic and rubber. The machine begins with the outer edge of the feed hopper and ends with the discharge area. This standard does not deal with equipment for feeding material or discharging shredded material. This standard does not deal with safety measures to reduce the risk from ignition of flammable residues in material to be shredded This standard does not deal with requirements for local exhaust ventilation systems. Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this standard. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard may be necessary to satisfy Directive 94/9/EC. This standard applies to machines which are manufactured after the date of approval of this standard by CEN.
Povezava na standarde
Povezava Ime Datum
Nadomeščen z SIST EN 12012-1:2018 - Stroji za predelavo gume in plastike - Drobilni stroji - 1. del: Varnostne zahteve za rezalne drobilnike in drobilnike 03-okt-2018
Revidiran SIST EN 12012-1:2018 - Stroji za predelavo gume in plastike - Drobilni stroji - 1. del: Varnostne zahteve za rezalne drobilnike in drobilnike 01-jul-2015
Konsolidira SIST EN 12012-3:2002 - Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders 01-nov-2008


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi