Jewellery - Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:2014)

ISO 11210:2014 specifies a gravimetric method for the determination of platinum in platinum jewellery alloys, preferably within the range of fineness stated in ISO 9202.
These alloys can contain palladium, iridium, rhodium, copper, cobalt, gold, ruthenium, gallium, chromium, indium, and less than 5 % tungsten. Some modifications are indicated where palladium, iridium, rhodium, gold, or ruthenium are present.

Schmuck - Bestimmung von Platin in Platin-Schmucklegierungen - Gravimetrische Bestimmung durch Fällung als Diammoniumhexachloroplatinat (ISO 11210:2014)

Diese Internationale Norm legt ein gravimetrisches Verfahren zur Bestimmung von Platin in Platinschmucklegierungen fest, vorzugsweise innerhalb eines Reinheitsbereichs wie in ISO 9202 festgelegt.
Diese Legierungen dürfen Palladium, Iridium, Rhodium, Kupfer, Kobalt, Gold, Nickel, Ruthenium, Gallium, Chrom, Indium und weniger als 5 % Wolfram enthalten. Es sind einige Änderungen angezeigt, wenn Palladium, Iridium, Rhodium, Gold, oder Ruthenium enthalten sind.

Joaillerie, bijouterie - Dosage du platine dans les alliages de platine pour la bijouterie-joaillerie - Méthode gravimétrique après précipitation de l'hexachloroplatinate de diammonium (ISO 11210:2014)

ISO 11210:2014 prescrit une méthode gravimétrique de dosage du platine dans les alliages de platine utilisés en bijouterie-joaillerie, de titres compris, de préférence, dans les limites indiquées dans l'ISO 9202.
Ces alliages peuvent contenir du palladium, de l'iridium, du rhodium, du cuivre, du cobalt, de l'or, du ruthénium, du gallium, du chrome, de l'indium et moins de 5 % de tungstène. Des modifications sont indiquées en cas de présence de palladium, d'iridium, de rhodium, d'or ou de ruthénium.

Nakit - Določevanje platine v zlitinah za nakit iz platine - Gravimetrična metoda po obarjanju diamonijevega heksakloroplatinata (ISO 11210:2014)

Standard ISO 11210:2014 določa gravimetrično metodo za določanje platine v zlitinah za nakit iz platine, po možnosti v razponu finosti, ki je naveden v standardu ISO 9202.
Te zlitine lahko vsebujejo paladij, iridij, rodij, baker, kobalt, zlato, rutenij, galij, krom, indij in manj kot 5 % volframa. Pri nekaterih zlitinah s spremenjeno sestavo je označena prisotnost paladija, iridija, rodija, zlata ali rutenija.

General Information

Status
Withdrawn
Public Enquiry End Date
29-Jun-2016
Publication Date
23-Oct-2016
Withdrawal Date
29-Mar-2023
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
29-Mar-2023
Due Date
21-Apr-2023
Completion Date
30-Mar-2023

Relations

Buy Standard

Standard
EN ISO 11210:2016
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11210:2016
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11210:2016
01-december-2016
1DGRPHãþD
SIST EN ISO 11210:1998
1DNLW'RORþHYDQMHSODWLQHY]OLWLQDK]DQDNLWL]SODWLQH*UDYLPHWULþQDPHWRGDSR
REDUMDQMXGLDPRQLMHYHJDKHNVDNORURSODWLQDWD ,62
Jewellery - Determination of platinum in platinum jewellery alloys - Gravimetric method
after precipitation of diammonium hexachloroplatinate (ISO 11210:2014)
Schmuck - Bestimmung von Platin in Platin-Schmucklegierungen - Gravimetrische
Bestimmung durch Fällung als Diammoniumhexachloroplatinat (ISO 11210:2014)
Joaillerie, bijouterie - Dosage du platine dans les alliages de platine pour la bijouterie-
joaillerie - Méthode gravimétrique après précipitation de l'hexachloroplatinate de
diammonium (ISO 11210:2014)
Ta slovenski standard je istoveten z: EN ISO 11210:2016
ICS:
39.060 Nakit Jewellery
SIST EN ISO 11210:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11210:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 11210:2016


EN ISO 11210
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2016
EUROPÄISCHE NORM
ICS 39.060 Supersedes EN ISO 11210:1995
English Version

Jewellery - Determination of platinum in platinum
jewellery alloys - Gravimetric method after precipitation of
diammonium hexachloroplatinate (ISO 11210:2014)
Joaillerie, bijouterie - Dosage du platine dans les Schmuck - Bestimmung von Platin in Platin-
alliages de platine pour la bijouterie-joaillerie - Schmucklegierungen - Gravimetrische Bestimmung
Méthode gravimétrique après précipitation de durch Fällung als Diammoniumhexachloroplatinat (ISO
l'hexachloroplatinate de diammonium (ISO 11210:2014)
11210:2014)
This European Standard was approved by CEN on 26 August 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11210:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11210:2016
EN ISO 11210:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11210:2016
EN ISO 11210:2016 (E)
European foreword
The text of ISO 11210:2014 has been prepared by Technical Committee ISO/TC 174 “Jewellery” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 11210:2016.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be
withdrawn at the latest by April 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 11210:1995.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11210:2014 has been approved by CEN as EN ISO 11210:2016 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 11210:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 11210:2016
INTERNATIONAL ISO
STANDARD 11210
Second edition
2014-12-01
Jewellery — Determination of
platinum in platinum jewellery
alloys — Gravimetric method after
precipitation of diammonium
hexachloroplatinate
Joaillerie — Dosage du platine dans les alliages de platine pour la
bijouterie-joaillerie — Méthode gravimétrique après précipitation de
l’hexachloroplatinate de diammonium
Reference number
ISO 11210:2014(E)
©
ISO 2014

---------------------- Page: 7 ----------------------

SIST EN ISO 11210:2016
ISO 11210:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11210:2016
ISO 11210:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Reagents . 1
5 Apparatus . 2
6 Sampling . 2
7 Procedure. 2
7.1 Platinum jewellery alloys with less than 5 % iridium, rhodium, ruthenium, or tungsten . 2
7.2 Platinum jewellery alloys with more than 5 % iridium, rhodium, or ruthenium, or
more than 0,5 % gold . 3
8 Methods of calculation and expression of results . 3
8.1 Calculation . 3
8.2 Repeatability . 4
9 Test report . 4
Annex A (informative) Reduction apparatus according to Rose . 5
Bibliography . 6
© ISO 2014 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 11210:2016
ISO 11210:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL
...

SLOVENSKI STANDARD
oSIST prEN ISO 11210:2016
01-junij-2016
1DNLW'RORþHYDQMHSODWLQHY]OLWLQDK]DQDNLWL]SODWLQH*UDYLPHWULþQDPHWRGDSR
REDUMDQMXGLDPRQLMHYHJDKHNVDNORURSODWLQDWD ,62
Jewellery - Determination of platinum in platinum jewellery alloys - Gravimetric method
after precipitation of diammonium hexachloroplatinate (ISO 11210:2014)
Schmuck - Bestimmung von Platin in Platin-Schmucklegierungen - Gravimetrische
Bestimmung durch Fällung als Diammoniumhexachloroplatinat (ISO 11210:2014)
Joaillerie, bijouterie - Dosage du platine dans les alliages de platine pour la bijouterie-
joaillerie - Méthode gravimétrique après précipitation de l'hexachloroplatinate de
diammonium (ISO 11210:2014)
Ta slovenski standard je istoveten z: prEN ISO 11210
ICS:
39.060 Nakit Jewellery
oSIST prEN ISO 11210:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11210:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11210:2016
INTERNATIONAL ISO
STANDARD 11210
Second edition
2014-12-01
Jewellery — Determination of
platinum in platinum jewellery
alloys — Gravimetric method after
precipitation of diammonium
hexachloroplatinate
Joaillerie — Dosage du platine dans les alliages de platine pour la
bijouterie-joaillerie — Méthode gravimétrique après précipitation de
l’hexachloroplatinate de diammonium
Reference number
ISO 11210:2014(E)
©
ISO 2014

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11210:2016
ISO 11210:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11210:2016
ISO 11210:2014(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Reagents . 1
5 Apparatus . 2
6 Sampling . 2
7 Procedure. 2
7.1 Platinum jewellery alloys with less than 5 % iridium, rhodium, ruthenium, or tungsten . 2
7.2 Platinum jewellery alloys with more than 5 % iridium, rhodium, or ruthenium, or
more than 0,5 % gold . 3
8 Methods of calculation and expression of results . 3
8.1 Calculation . 3
8.2 Repeatability . 4
9 Test report . 4
Annex A (informative) Reduction apparatus according to Rose . 5
Bibliography . 6
© ISO 2014 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 11210:2016
ISO 11210:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword — Supplementary information.
The committee responsible for this document is ISO/TC 174, Jewellery.
This second edition cancels and replaces the first edition (ISO 11210:1995), which has been technically
revised with the following changes:
— addition of an analytical balance in Clause 5;
— change of requirement for sampling in Clause 6;
— addition in 7.1 to allow dissolution in a sealed container under pressure;
— addition in 7.1 to allow drying of the crucibles in a programmable furnace;
— deletion of the temperature for reduction in 7.1;
— International Standard editorially revised.
iv © ISO 2014 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 11210:2016
ISO 11210:2014(E)

Introduction
The following definitions apply in understanding how to implement an ISO International Standard and
other normative ISO deliverables (TS, PAS, IWA).
— “shall” indicates a requirement
— “should” indicates a recommendation
— “may” is used to indicate that something is permitted
— “can” is used to indicate that something is possible, for example, that an organization or individual
is able to do something
ISO/IEC Directives, Part 2 (sixth edition, 2011), 3.3.1 defines a requirement as an “expression in the
content of a document conveying criteria to be fulfilled if compliance with the document is to be claimed
and from which no deviation is permitted.”
ISO/IEC Directives, Part 2 (sixth edition, 2011), 3.3.2 defines a recommendation as an “expression in the
content of a document conveying that among several possibilities, one is recommended as particularly
suitable, without mentioning or excluding others, or that a certain course of action is preferred but not
necessarily required, or that (in the negative form) a certain possibility or course of action is deprecated
but not prohibited.”
© ISO 2014 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 11210:2016

---------------------- Page: 8 ----------------------
oSIST prEN ISO 11210:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.