iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61727:2001

(Main)

Photovoltaic (PV) systems - Characteristics of the utility interface

Photovoltaic (PV) systems - Characteristics of the utility interface

Addresses the interface requirements between the PV system and the utility, and provides technical recommendations.

Photovoltaische (PV) Systeme - Eigenschaften der Netz-Schnittstelle

Systèmes photovoltaïques (PV) - Caractéristiques de l'interface de raccordement au réseau

Concerne les exigences relatives à l'interface de raccordement entre les systèmes PV et le réseau, et en fournit les recommandations techniques. Complète la CEI 964 et présente les prescriptions de conception pour l'application des unités de visualisation dans les salles de commande principales des centrales nucléaires.

Fotonapetostni (PV) sistemi – Značilnosti omrežnega vmesnika

General Information

Status
Withdrawn
Publication Date
31-Aug-2001
Withdrawal Date
13-Jun-2023
ICS
27.160 - Solar energy engineering
Technical Committee
PVS - Solar photovoltaic energy systems
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Jun-2023
Due Date
06-Jul-2023
Completion Date
14-Jun-2023
Directive
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
EN 61727:1995 - Photovoltaic (PV) systems - Characteristics of the utility interface

Buy Standard

EN 61727:2001EN 61727:2001
PreviousNext
Standard
EN 61727:2001
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61727:2001
01-september-2001
)RWRQDSHWRVWQL 39 VLVWHPL±=QDþLOQRVWLRPUHåQHJDYPHVQLND
Photovoltaic (PV) systems - Characteristics of the utility interface
Photovoltaische (PV) Systeme - Eigenschaften der Netz-Schnittstelle
Systèmes photovoltaïques (PV) - Caractéristiques de l'interface de raccordement au
réseau
Ta slovenski standard je istoveten z: EN 61727:1995
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
SIST EN 61727:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61727:2001

---------------------- Page: 2 ----------------------

SIST EN 61727:2001

---------------------- Page: 3 ----------------------

SIST EN 61727:2001

---------------------- Page: 4 ----------------------

SIST EN 61727:2001

---------------------- Page: 5 ----------------------

SIST EN 61727:2001

---------------------- Page: 6 ----------------------

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 63027:2023(Main)
Photovoltaic power systems - DC arc detection and interruption (IEC 63027:2023)
EN IEC 63027:2023

IEC 63027:2023 applies to equipment used for the detection and optionally the interruption of electric DC arcs in photovoltaic (PV) system circuits. The document covers test procedures for the detection of series arcs within PV circuits, and the response times of equipment employed to interrupt the arcs.
The document defines reference scenarios according to which the testing is conducted. This document covers equipment connected to systems not exceeding a maximum PV source circuit voltage of 1 500 V DC. This document provides requirements and testing procedures for arc-fault protection devices used in PV systems to reduce the risk of igniting an electrical fire.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62109-3:2023(Main)
Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
EN IEC 62109-3:2022

IEC 62109-3:2020 covers the particular safety requirements for electronic elements that are mechanically and/or electrically incorporated with photovoltaic (PV) modules or systems.
Mechanically and/or electrically incorporated means that the whole combination of electronic device with the photovoltaic element is sold as one product. Nevertheless, tests provided in this document may also be used to evaluate compatibility of PV modules and electronic devices that are sold separately and are intended to be installed close to each other.
The purpose of the requirements of this document is to provide additional safety-related testing requirements for the following types of integrated electronics, collectively referred to as module integrated equipment (MIE):
a) Type A MIE where the PV element can be evaluated as a PV module according to IEC 61730-1 and IEC 61730‑2 independently from the electronic element;
b) Type B MIE where the PV element cannot be evaluated as a PV module according to IEC 61730-1 and IEC 61730-2 independently from the electronic element.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60904-5:2011/A1:2023(Amendment)
Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
EN 60904-5:2011/A1:2022

This part of IEC 60904 describes the preferred method for determining the equivalent cell
temperature (ECT) of PV devices (cells, modules and arrays of one type of module), for the
purposes of comparing their thermal characteristics, determining NOCT (nominal operating cell
temperature) or alternatively NMOT (nominal module operating temperature), and translating
measured I-V characteristics to other temperatures.

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62759-1:2022(Main)
Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units
EN IEC 62759-1:2022

Photovoltaic (PV) modules are electrical devices intended for continuous outdoor exposure during their lifetime. Existing type approval standards do not consider mechanical stresses that may occur during transportation to the PV installation destination.
This part of IEC 62759 describes methods for the simulation of transportation of complete package units of modules and combined subsequent environmental impacts.
This standard is designed so that its test sequence can co-ordinate with those of IEC 61215 so that a single set of samples may be used to perform both the transportation simulation and performance evaluation of a photovoltaic module design.This standard applies to flat plate photovoltaic modules.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62108:2022(Main)
Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval
EN IEC 62108:2022

This International Standard specifies the minimum requirements for the design qualification and type approval of concentrator photovoltaic (CPV) modules and assemblies suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1. The test sequence is partially based on that specified in IEC 61215-1 for the design qualification and type approval of flat-plate terrestrial crystalline silicon PV modules. However, some changes have been made to account for the special features of CPV receivers and modules, particularly with regard to the separation of on-site and in-lab tests, effects of tracking alignment, high current density, and rapid temperature changes, which have resulted in the formulation of some new test procedures or new requirements.
The object of this test standard is to determine the electrical, mechanical, and thermal characteristics of the CPV modules and assemblies and to show, as far as possible within reasonable constraints of cost and time, that the CPV modules and assemblies are capable of withstanding prolonged exposure in climates described in the scope. The actual life of CPV modules and assemblies so qualified will depend on their design, production, environment, and the conditions under which they are operated.
This standard shall be used in conjunction with the retest guidelines described in Annex B.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61215-1-4:2021/A1:2022(Amendment)
Amendment 1 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules
EN IEC 61215-1-4:2021/A1:2022
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61215-1-3:2021/A1:2022(Amendment)
Amendment 1 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
EN IEC 61215-1-3:2021/A1:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61215-1-2:2021/A1:2022(Amendment)
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
EN IEC 61215-1-2:2021/A1:2022

No scope available

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62093:2022(Main)
Photovoltaic system power conversion equipment - Design qualification and type approval
EN IEC 62093:2022

This International Standard lays down IEC requirements for the design qualification of power conversion equipment (PCE) suitable for long-term operation in terrestrial photovoltaic (PV) systems.
1.1 Equipment included in this scope
This document covers the following items in its scope: electronic power conversion equipment intended for use in terrestrial PV applications. The term PCE refers to equipment and components for electronic power conversion of electric power into another kind of electric power with respect to voltage, current, and frequency. This standard is suitable for PCE for use in both indoor and outdoor climates as defined in IEC 60721-3-3 and IEC 60721-3-4. Such equipment may include, but is not limited to, grid-tied and off-grid DC-to-AC PCEs, DC-to-DC converters, battery charger converters, and battery charge controllers.
This standard covers PCE that is connected to PV arrays that do not nominally exceed a maximum circuit voltage of 1500 V DC. The equipment may also be connected to systems not exceeding 1000 V AC at the AC mains circuits, non-main AC load circuits, and to other DC source or load circuits such as batteries. If particular ancillary parts whereby manufacturers and models are specified in the manual for use with the PCE, then those parts shall be tested with the PCE.
1.2 Equipment for which other requirements may apply This standard has not been written to address characteristics of power sources other than PV systems, such as wind turbines, fuel cells, rotating machine sources, etc.
This standard has not been written with the intent of addressing the characteristics of power electronic conversion equipment fully integrated into photovoltaic modules. Separate standards exist or are in development for those types of devices. It is, however, applicable to devices where the manufacturer explicitly specifies the capability of full detachment from and subsequent reattachment to the PV module or if the input and output terminals can be accessed and a specification sheet for the PCE is available. Devices meeting these requirements may be tested as individual samples independent from the PV module.
This standard does not apply to power conversion equipment with integrated (built-in) electrochemical energy storage (e.g. lead acid or lithium-ion). It is, however, applicable to equipment where the manufacturer specifies and permits complete removal of the electrochemical energy storage from the PCE so that stand-alone assessment of the PCE with the storage removed becomes possible.
1.3 Object
The object of the test sequences contained herein is to establish a basic level of durability and to show, as far as it is possible within reasonable constraints of cost and time, that the PCE is capable of maintaining this performance after prolonged exposure to the simulated environmental stresses described herein that are based on the intended use conditions specified by the manufacturer. Optional tests contained herein may be selected depending on the intended installation, market, or special environmental conditions that the PCE is anticipated to experience. The categorization imposes differentiated test sequences and test severity levels
reflecting the different requirements of mechanical and electrical 56 components in different environments.
PCE are grouped into categories based on size and installation environment.
The actual life expectancy of components so qualified will depend on their design, their environment, and the conditions under which they are operated. Estimation of a lifetime and wear out is not generally covered by this standard.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60891:2022(Main)
Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
EN IEC 60891:2021

This document defines procedures to be followed for temperature and irradiance corrections to the measured I-V (current-voltage) characteristics (also known as I-V curves) of photovoltaic (PV) devices. It also defines the procedures used to determine factors relevant to these corrections. Requirements for I-V measurement of PV devices are laid down in IEC 60904-1 and its relevant subparts.
The PV devices include a single solar cell with or without a protective cover, a sub-assembly of solar cells, or a module. A different set of relevant parameters for I-V curve correction applies for each type of device. The determination of temperature coefficients for a module (or subassembly of cells) may be calculated from single cell measurements, but this is not the case for the internal series resistance and curve correction factor, which should be separately measured for a module or subassembly of cells. Refer to Annex A for alternative procedures for series resistance determination.
The use of I-V correction parameters are valid for the PV device for which they have been measured. Variations may occur within a production lot or the type class.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day