SIST EN ISO 5810:1998

SLOVENSKI STANDARD
SIST EN ISO 5810:1998
01-november-1998
âNURELQãNUREQLGHULYDWL'RORþHYDQMHNORULGD3RWHQFLRPHWULMVNDPHWRGD
Starches and derived products - Determination of chloride content - Potentiometric
method
Stärke und Stärkederivate - Bestimmung des Chloridgehaltes - Potentiometrisches
Verfahren
Amidons, fécules et produits dérivés - Détermination de la teneur en chlorures - Méthode
potentiométrique
Ta slovenski standard je istoveten z: EN ISO 5810:1994
ICS:
67.180.20 Škrob in izdelki iz njega Starch and derived products
SIST EN ISO 5810:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 5810:1998

---------------------- Page: 2 ----------------------

SIST EN ISO 5810:1998

---------------------- Page: 3 ----------------------

SIST EN ISO 5810:1998

---------------------- Page: 4 ----------------------

SIST EN ISO 5810:1998
Internatio.nal Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWE~YHAPOC\HAR OPH-bl3AUMfI fl0 CTAH~PTM3A~W~RGANISATION INTERNATIONALE DE NORMALISATION
Starches and derived products - Determination of
chloride content - Potentiometric method
Determination de Ia teneur en Chlorures - Methode potentiombtrique
Amidons, fkcules et produits d&=iv& -
First edition - 1982-12-01
Ref. No. ISO 58104982 (E)
UDC 664.2 : 543.257 : 546.131
determination of content, chlorides, potentiometric analysis.
Descriptors : starches, Chemical analysis,
Price based on 2 pages

---------------------- Page: 5 ----------------------

SIST EN ISO 5810:1998
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bedies). The work of developing International
Standards is carried out through ISO technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 5810 was developed by Technical Committee ISO/TC 93,
Starch (incfuding derivatives and by-products), and was circulated to the member
bodies in February 1982.
lt has been approved by the member bodies of the following countries :
Austria Netherlands USA
Egypt, Arab Rep. of Portugal USSR
France
Romania
Germany, F. R. South Africa, Rep. of
No member body expressed disapproval of the document.
0
International Organization for Standardization, 1982
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 5810:1998
ISO 5810-1982 (E)
INTERNATIONAL STANDARD
Starches and derived products - Determination of
Potentiometric method
chloride content -
Scope and field sf application
1 4.6 Electrodes.
This International Standard specifies a potentiometric method
4.6.1 Silver/silver chloride electrode.
for the determination of the chloride content of starches and
derived products, except cationic starches and amyloids sol-
This may be purchased or may be prepared from a silver elec-
uble when cold, the viscosity of these being too high to allow
trode as follows:
for correct stirring when titrating.
- Immerse the silver electrode in an approximately
0,l mol/12) potassium chloride Solution and connect it to
2 Principle
the positive pole of a 4 V battery.
Potentiometric titration of a Solution or Suspension of the
- Connect the negative pole to a second silver or
Sample using a Standard volumetric silver nitrate Solution.
platinum electrode and pass the current through for about
5 min until the surface of the positive electrode becomes
dark in colour. Wash this positive electrode carefully with
3 Reagents
water and keep in water until required for use.
During the analysis, use onfy reagents of recognized analytical
4.62 Reference electrode.
quality and only distilled water or water of at least equivalent
purity.
Use an appropriate electrode System for the potentiometric
determination of chloride (such Systems are commercially
3.1 Nitrit acid, concentrated, ,920 ‘
...