Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone) (ISO 1833-13:2019)

This document specifies a method, using carbon disulfide/acetone, to determine the mass percentage of chlorofibre, after removal of non-fibrous matter, in textiles made of mixtures of - certain chlorofibres, with - wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, elastomultiester, acrylic, melamine, polypropylene, polypropylene/polyamide bicomponent, polyacrylate and glass fibres. It is also possible to analyse mixtures containing chlorofibres by using the test methods described in ISO 1833-17 or ISO 1833-21.

Textilien - Quantitative chemische Analysen - Teil 13: Mischungen von bestimmten Chlorfasern mit bestimmten anderen Fasern (Schwefelkohlenstoff-/Aceton-Verfahren) (ISO 1833-13:2019)

Dieses Dokument legt ein Schwefelkohlenstoff-/Aceton-Verfahren zur Bestimmung des prozentualen Massenanteils an Chlorfasern, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus Mischungen von
—   bestimmten Chlorfasern
mit
—   Wolle, Tierhaar, Seide, Baumwolle, Viskose, Cupro, Modal, Lyocell, Polyamid, Polyester, Elastomultiester, Polyacryl, Melamin, Polypropylen, Polypropylen-/Polyamid-Bikomponentenfasern, Polyacrylat und Glasfasern fest.
Außerdem besteht die Möglichkeit, Mischungen mit Chlorfasern mithilfe der in ISO 1833 17 oder ISO 1833 21 beschriebenen Verfahren zu analysieren.

Textiles - Analyse chimique quantitative - Partie 13: Mélanges de certaines chlorofibres avec certaines autres fibres (méthode au sulfure de carbone/acétone) (ISO 1833-13:2019)

Le présent document spécifie une méthode de détermination, au sulfure de carbone/acétone, de la masse exprimée en pourcentage de chlorofibres, après élimination des matières non fibreuses, dans les textiles composés de mélanges de:
—          certaines chlorofibres
avec
—          laine, poils animaux, soie, coton, viscose, cupro, modal, lyocell, polyamide, polyester, élastomultiester, acrylique, mélamine, polypropylène, bicomposant polypropylène/polyamide, polyacrylate et fibres de verre.
Il est également possible d'analyser les mélanges contenant des chlorofibres à l'aide des méthodes d'essai décrites dans l'ISO 1833‑17 ou l'ISO 1833‑21.

Tekstilije - Kvantitativna kemična analiza - 13. del: Mešanica nekaterih klorovlaken in nekaterih drugih vlaken (metoda z uporabo ogljikovega disulfida/acetona) (ISO 1833-13:2019)

Ta dokument določa metodo, v kateri se z ogljikovim disulfidom/acetonom določa masni odstotek klorovlaken po odstranitvi nevlakenske snovi v tekstilijah iz mešanic - nekaterih klorovlaken in - volne, živalskih vlaken, svile, bombaža, viskoze, kupro vlaken, modalnih vlaken, liocela, poliamida, poliestra, elastomultiestra, akrila, melamina, polipropilena, dvokomponentnega polipropilena/poliamida, poliakrilata in steklenih vlaken. Mešanice, ki vsebujejo klorovlakna, je mogoče analizirati tudi z uporabo preskusnih metod, opisanih v standardu ISO 1833-17 ali ISO 1833-21.

General Information

Status
Published
Public Enquiry End Date
02-Apr-2019
Publication Date
07-Nov-2019
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Nov-2019
Due Date
09-Jan-2020
Completion Date
08-Nov-2019

Relations

Buy Standard

Standard
EN ISO 1833-13:2019
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 1833-13:2019
German language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1833-13:2019
01-december-2019
Nadomešča:
SIST EN ISO 1833-13:2013
Tekstilije - Kvantitativna kemična analiza - 13. del: Mešanica nekaterih klorovlaken
in nekaterih drugih vlaken (metoda z uporabo ogljikovega disulfida/acetona) (ISO
1833-13:2019)
Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres with
certain other fibres (method using carbon disulfide/acetone) (ISO 1833-13:2019)
Textilien - Quantitative chemische Analysen - Teil 13: Mischungen von bestimmten
Chlorfasern mit bestimmten anderen Fasern (Schwefelkohlenstoff-/Aceton-Verfahren)
(ISO 1833-13:2019)
Textiles - Analyse chimique quantitative - Partie 13: Mélanges de certaines chlorofibres
avec certaines autres fibres (méthode au sulfure de carbone/acétone) (ISO 1833-
13:2019)
Ta slovenski standard je istoveten z: EN ISO 1833-13:2019
ICS:
59.060.20 Umetna vlakna Man-made fibres
71.040.40 Kemijska analiza Chemical analysis
SIST EN ISO 1833-13:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 1833-13:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 1833-13:2019


EN ISO 1833-13
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2019
EUROPÄISCHE NORM
ICS 59.060.01 Supersedes EN ISO 1833-13:2010
English Version

Textiles - Quantitative chemical analysis - Part 13:
Mixtures of certain chlorofibres with certain other fibres
(method using carbon disulfide/acetone) (ISO 1833-
13:2019)
Textiles - Analyse chimique quantitative - Partie 13: Textilien - Quantitative chemische Analysen - Teil 13:
Mélanges de certaines chlorofibres avec certaines Mischungen von bestimmten Chlorfasern mit
autres fibres (méthode au sulfure de carbone/acétone) bestimmten anderen Fasern (Schwefelkohlenstoff-
(ISO 1833-13:2019) /Aceton-Verfahren) (ISO 1833-13:2019)
This European Standard was approved by CEN on 16 May 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-13:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 1833-13:2019
EN ISO 1833-13:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 1833-13:2019
EN ISO 1833-13:2019 (E)
European foreword
This document (EN ISO 1833-13:2019) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1833-13:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 1833-13:2019 has been approved by CEN as EN ISO 1833-13:2019 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 1833-13:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 1833-13:2019
INTERNATIONAL ISO
STANDARD 1833-13
Second edition
2019-10
Textiles — Quantitative chemical
analysis —
Part 13:
Mixtures of certain chlorofibres with
certain other fibres (method using
carbon disulfide/acetone)
Textiles — Analyse chimique quantitative —
Partie 13: Mélanges de certaines chlorofibres avec certaines autres
fibres (méthode au sulfure de carbone/acétone)
Reference number
ISO 1833-13:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 1833-13:2019
ISO 1833-13:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 1833-13:2019
ISO 1833-13:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 2
7 Test procedure . 2
8 Calculation and expression of results . 3
9 Precision . 3
Bibliography .
...

SLOVENSKI STANDARD
oSIST prEN ISO 1833-13:2019
01-marec-2019
7HNVWLOLMH.YDQWLWDWLYQDNHPLþQDDQDOL]DGHO0HãDQLFDQHNDWHULKNORURYODNHQ
LQQHNDWHULKGUXJLKYODNHQ PHWRGD]XSRUDERRJOMLNRYHJDGLVXOILGDDFHWRQD
,62',6
Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres with
certain other fibres (method using carbon disulfide/acetone) (ISO/DIS 1833-13:2019)
Textilien - Quantitative chemische Analysen - Teil 13: Mischungen von bestimmten
Chlorfasern mit bestimmten anderen Fasern (Schwefelkohlenstoff-/Aceton-Verfahren)
(ISO/DIS 1833-13:2019)
Textiles - Analyse chimique quantitative - Partie 13: Mélanges de certaines chlorofibres
avec certaines autres fibres (méthode au sulfure de carbone/acétone) (ISO/DIS 1833-
13:2019)
Ta slovenski standard je istoveten z: prEN ISO 1833-13
ICS:
59.060.20 Umetna vlakna Man-made fibres
oSIST prEN ISO 1833-13:2019 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 1833-13:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 1833-13:2019


ENTWURF
EUROPÄISCHE NORM
prEN ISO 1833-13
EUROPEAN STANDARD

NORME EUROPÉENNE

Januar 2019
ICS 59.060.01 Vorgesehen als Ersatz für EN ISO 1833-13:2010
Deutsche Fassung

Textilien - Quantitative chemische Analysen - Teil 13:
Mischungen von bestimmten Chlorfasern mit bestimmten
anderen Fasern (Schwefelkohlenstoff-/Aceton-Verfahren)
(ISO/DIS 1833-13:2019)
Textiles - Quantitative chemical analysis - Part 13: Textiles - Analyse chimique quantitative - Partie 13:
Mixtures of certain chlorofibres with certain other Mélanges de certaines chlorofibres avec certaines
fibres (method using carbon disulfide/acetone) autres fibres (méthode au sulfure de carbone/acétone)
(ISO/DIS 1833-13:2019) (ISO/DIS 1833-13:2019)
Dieser Europäische Norm-Entwurf wird den CEN-Mitgliedern zur parallelen Umfrage vorgelegt. Er wurde vom Technischen
Komitee CEN/TC 248 erstellt.

Wenn aus diesem Norm-Entwurf eine Europäische Norm wird, sind die CEN-Mitglieder gehalten, die CEN-Geschäftsordnung zu
erfüllen, in der die Bedingungen festgelegt sind, unter denen dieser Europäischen Norm ohne jede Änderung der Status einer
nationalen Norm zu geben ist.

Dieser Europäische Norm-Entwurf wurde von CEN in drei offiziellen Fassungen (Deutsch, Englisch, Französisch) erstellt. Eine
Fassung in einer anderen Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine
Landessprache gemacht und dem CEN-CENELEC-Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die
offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen
jugoslawischen Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland,
Litauen, Luxemburg, Malta, den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz,
Serbien, der Slowakei, Slowenien, Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und
Zypern.

Die Empfänger dieses Norm-Entwurfs werden gebeten, mit ihren Kommentaren jegliche relevante Patentrechte, die sie kennen,
mitzuteilen und unterstützende Dokumentationen zur Verfügung zu stellen.

Warnvermerk : Dieses Schriftstück hat noch nicht den Status einer Europäischen Norm. Es wird zur Prüfung und Stellungnahme
vorgelegt. Es kann sich noch ohne Ankündigung ändern und darf nicht als Europäischen Norm in Bezug genommen werden.


EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

CEN-CENELEC Management-Zentrum: Rue de la Science 23, B-1040 Brüssel
© 2019 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. prEN ISO 1833-13:2019 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 1833-13:2019
prEN ISO 1833-13:2019 (D)
Inhalt
Seite
Europäisches Vorwort.3
Vorwort .4
1 Anwendungsbereich .5
2 Normative Verweisungen .5
3 Begriffe .5
4 Kurzbeschreibung .5
5 Reagenzien .6
6 Prüfgeräte.6
7 Durchführung.6
8 Berechnung und Auswertung der Ergebnisse.7
9 Präzision .7
Literaturhinweise .8

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 1833-13:2019
prEN ISO 1833-13:2019 (D)
Europäisches Vorwort
Dieses Dokument (prEN ISO 1833-13:2019) wurde vom Technischen Komitee ISO/TC 38 „Textiles“ in
Zusammenarbeit mit dem Technischen Komitee CEN/TC 248 „Textilien und textile Erzeugnisse“ erarbeitet,
dessen Sekretariat von BSI gehalten wird.
Dieses Dokument ist derzeit zur parallelen Umfrage vorgelegt.
Dieses Dokument wird EN ISO 1833-13:2010 ersetzen.
Anerkennungsnotiz
Der Text von ISO/DIS 1833-13:2019 wurde von CEN als prEN ISO 1833-13:2019 ohne irgendeine
Abänderung genehmigt.
3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 1833-13:2019
prEN ISO 1833-13:2019 (D)
Vorwort
ISO (die Internationale Organisation für Normung) ist eine weltweite Vereinigung nationaler
Normungsorganisationen (ISO-Mitgliedsorganisationen). Die Erstellung von Internationalen Normen wird
üblicherweise von Technischen Komitees von ISO durchgeführt. Jede Mitgliedsorganisation, die Interesse an
einem Thema hat, für welches ein Technisches Komitee gegründet wurde, hat das Recht, in diesem Komitee
vertreten zu sein. Internationale staatliche und nichtstaatliche Organisationen, die in engem Kontakt mit ISO
stehen, nehmen ebenfalls an der Arbeit teil. ISO arbeitet bei allen elektrotechnischen Themen eng mit der
Internationalen Elektrotechnischen Kommission (IEC) zusammen.
Die Verfahren, die bei der Entwicklung dieses Dokuments angewendet wurden und die für die weitere Pflege
vorgesehen sind, werden in den ISO/IEC-Direktiven, Teil 1 beschrieben. Es sollten insbesondere die
unterschiedlichen Annahmekriterien
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.