SIST EN 61788-19:2014

Oznaka standarda: SIST EN 61788-19:2014
Koda projekta: 24410
Organizacija: SIST
Naslov (angleški): Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
Naslov (slovenski): Superprevodnost - 19. del: Merjenje mehanskih lastnosti - Natezni preskus reaktivnih Nb3Sn kompozitnih superprevodnikov pri sobni temperaturi (IEC 61788-19:2013)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 61788-19:2014 angleški jezik Active SIST-I: 85.91 EUR
PDF
Papir
Tehnični odbor: I09 - Imaginarni 09
ICS: 29.050
Status: Objavljen
Objavljen: 01-apr-2014
Refer. št. objave: Sporocila 2014-04
Referenčna oznaka: EN 61788-19:2014
Področje projekta (angleško): This part of IEC61788 covers a test method detailing the tensile test procedures to be carried out on reacted Cu/Nb3Sn composite superconducting wires at room temperature. The object of this test is to measure the modulus of elasticity and to determine the proof strength of the composite due to yielding of the copper and the copper tin components from the stress versus strain curve. Furthermore, the elastic limit, the tensile strength, and the elongation after fracture can be determined by means of the present method, but they are treated as optional quantities because the measured quantities of the elastic limit and the elongation after fracture have been reported to be subject to significant uncertainties according to the international round robin test. The sample covered by this test procedure should have a bare round or rectangular crosssection with an area between 0,15 mm2 and 2,0 mm2 and a copper to non-copper volume ratio of 0,2 to 1,5 and should have no insulation.

Najbolje prodajani standardi