Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers

2019-07-05: to be launched to the enquiry together with pr = 70011 (SV)
2019-07-05: Represents common mods. to EN 62841-2-6 (PR=70011)

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-6: Besondere Anforderungen für handgeführte Hämmer

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 2-6 : Exigences particulières pour les marteaux portatifs

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-6. del: Posebne zahteve za ročna kladiva - Dopolnilo A11

General Information

Status
Published
Public Enquiry End Date
31-Oct-2019
Publication Date
18-Oct-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
16-Oct-2020
Due Date
21-Dec-2020
Completion Date
19-Oct-2020

Buy Standard

Amendment
EN IEC 62841-2-6:2020/A11:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 62841-2-6:2019/oprAA:2019
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62841-2-6:2020/A11:2020
01-december-2020
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-
6. del: Posebne zahteve za ročna kladiva - Dopolnilo A11
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
Ta slovenski standard je istoveten z: EN IEC 62841-2-6:2020/A11:2020
ICS:
25.140.20 Električna orodja Electric tools
25.140.30 Orodja za ročno uporabo Hand-operated tools
SIST EN IEC 62841-2-6:2020/A11:2020 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62841-2-6:2020/A11:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62841-2-6:2020/A11:2020


EUROPEAN STANDARD EN IEC 62841-2-6:2020/A11

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2020
ICS 25.140.20

English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 2-6: Particular
requirements for hand-held hammers
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 2-6 : Exigences transportable Werkzeuge und Rasen- und

particulières pour les marteaux portatifs Gartenmaschinen - Sicherheit - Teil 2-6: Besondere
(IEC 62841-2-6:2020) Anforderungen für handgeführte Hämmer
(IEC 62841-2-6:2020)
This amendment A11 modifies the European Standard EN IEC 62841-2-6:2020; it was approved by CENELEC on 2020-08-10. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62841-2-6:2020/A11:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62841-2-6:2020/A11:2020
EN IEC 62841-2-6:2020/A11:2020 (E)
European foreword
This document EN IEC 62841-2-6:2020/A11:2020 has been prepared by CLC/TC 116 “Safety and
environmental aspects of motor-operated electric tools”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2021-08-10
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2024-08-10
to be
conflicting with this document have
withdrawn
This document modifies by common modifications EN IEC 62841-2-6:2020, which consists of the text of
116/459/FDIS (future IEC 62841-2-6, Ed. 1) prepared by IEC/TC 116 ”Safety of motor-operated electric
tools“.
This European Standard is divided into four parts:
Part 1: General requirements which are common to most hand-held electric motor operated tools
(for the purpose of this standard referred to simply as tools) which could come within the
scope of this standard;
Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the
requirements given in Part 1 to account for the particular hazards and characteristics of these
specific tools.
The following print types are used:
— requirements; in roman type
— test specifications: in italic type;
— notes: in smaller roman type.
The terms defined in Clause 3 are printed in bold typeface.
Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting
from 101.
Clauses, subclauses, notes, tables, figures and annexes which are additional to those in
IEC 62841-2-6:2020 are prefixed “Z”.
This document follows the overall requirements of EN ISO 12100.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Compliance with the clauses of Part 1 together with Part 2-6 provides one means of conforming with the
essential health and safety requirements of the Directive concerned.
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62841-2-6:2020/A11:2020
EN IEC 62841-2-6:2020/A11:2020 (E)
1 Modification to Clause 1, “Scope”
Add the following to the existing Clause 1:
“This document covers all significant hazards, hazardous situations or hazardous events relevant for tools
covered by this standard.
NOTE Z101 Essential requirements not mentioned in Table ZZ.1 are deemed to be not applicable, because the
corresponding hazards are either not relevant for tools covered by this standard or do not require specific action by the
designer.”
2 Modification to Annex I, “Measurement of noise and vibration emissions”
Replace the title of Annex I with the following:
“Annex I
(normative)

Measurement of noise and vibration emissions”
and delete the NOTE.
3 Modification to Annex K, “Battery tools and battery packs”
Add the following new subclause:
K.21.18.Z101 Isolation and disabling device
Rotary hammers with an integral battery shall be equipped
— with an isolation device to prevent the risk of injury from mechanical hazards during servicing or user
maintenance; or
— with a disabling device that prevents unintentional starting of the tool.
An isolation device shall
— provide disconnection of all poles of the battery from the serviceable region of the tool;
— be equipped with an unambiguous indication of the state of the disconnection device which
corresponds to each position of its manual control (actuator);
— be provided with protection against accidental reconnection.
NOTE 1 Examples of methods to achieve this disconnection include removable jumpers, integral batteries that
can be disconnected for servicing or user maintenance, or an electromechanical power switch with a direct
mechanical link between the actuator and the contact.
NOTE 2 The risk of accidental reconnection for a power switch is addressed by the requirement of 21.18.1.2. The
other examples in NOTE 1 achieve this by the necessary actions for reconnection.
A disabling device may be achieved by any of the following:
— a self-restoring or non-self-restoring lock-off device where two separate and dissimilar actions are
necessary before the motor is switched on (e.g. a power switch which has to be pushed in before it
can be moved laterally to close the contacts to start the motor). It shall not be possible to achieve these
two actions with a single grasping motion or a straight-line motion;
— a removable disabling device provided with the tool where it shall not be possible for the tool to be
operated when either applied or removed.
3

---------------------- Page: 5 ----------------------
SIST EN IEC 62841-2-6:2020/A11:2020
EN IEC 62841-2-6:2020/A11:2020 (E)
Compliance is checked by inspection and by manual test.
4 Modification to Annex L, “Battery tools and battery packs provided with mains
connection or non-isolated sources”
Add the following new subclause:
L.21.18.Z101 Isolation and disabling device
Rotary hammers with an integral battery shall be equipped
— with an isolation device to prevent the risk of injury from mechanical hazards during servicing or user
maintenance; or
— with a disabling device that prevents unintentional starting of the tool.
An isolation device shall
— provide disconnection of all poles of the battery from the serviceable region of the tool;
— be equipped with an unambiguous in
...

SLOVENSKI STANDARD
oSIST prEN IEC 62841-2-6:2019/oprAA:2019
01-oktober-2019
Elektromotorna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 2-6. del:
Posebne zahteve za ročna kladiva - Dopolnilo AA
Electric motor-operated tools, transportable tools and lawn and garden machinery -
Safety - Part 2-6: Particular requirements for hand-held hammers
Ta slovenski standard je istoveten z: prEN IEC 62841-2-6:2019/prAA:2019
ICS:
25.140.20 Električna orodja Electric tools
25.140.30 Orodja za ročno uporabo Hand-operated tools
oSIST prEN IEC 62841-2- en
6:2019/oprAA:2019
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62841-2-6:2019/oprAA:2019

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62841-2-6:2019/oprAA:2019

EUROPEAN STANDARD DRAFT
prEN IEC 62841-2-6:2019
NORME EUROPÉENNE

EUROPÄISCHE NORM
prAA
August 2019
ICS
English Version
Electric motor-operated tools, transportable tools and lawn and
garden machinery - Safety - Part 2-6: Particular requirements for
hand-held hammers
To be completed To be completed
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 62841-2-6:2019; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2019-11-08.

It has been drawn up by CLC/TC 116.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 70061 Ref. No. prEN IEC 62841-2-6:2019/prAA:2019 E

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62841-2-6:2019/oprAA:2019
prEN IEC 62841-2-6:2019/prAA:2019 (E)
1 European foreword
2 This document prEN IEC 62841-2-6:2019/prAA:2019 has been prepared by CLC/TC 116 “Safety of
3 motor-operated electric tools”.
4 This document is currently submitted to the Enquiry.
5 The following dates are proposed:
– latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
– latest date by which this document has to be implemented (dop) dor + 12 months
at national level by publication of an identical
national standard or by endorsement
– latest date by which the national standards conflicting (dow) dor + 48 months
with this document have to be withdrawn (to be confirmed or
modified when voting)
6 This document modifies by common modifications EN IEC 62841-2-6:2019, which consists of the text of
7 116/414/CDV (future IEC 62841-2-6, Ed. 1) prepared by IEC/TC 116 "Safety of motor-operated electric
8 tools".
9 If approved, this draft amendment will be published as EN IEC 62841-2-6:20XX/A11:20XX.
10 This document will supersede EN 60745-2-6:2010 and all of its amendments and corrigenda (if any).
11 This series is divided into four parts:
12 Part 1: General requirements which are common to most hand-held electric motor operated tools (for the
13 purpose of this standard referred to simply as tools) which could come within the scope of this standard;
14 Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the
15 requirements given in Part 1 to account for the particular hazards and characteristics of these specific
16 tools.
17 This Part 2-6 is to be used in conjunction with EN 62841-1:2015.
18 This Part 2-6 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it
19 into the European Standard: Particular requirements for hand-held hammers.
20 Where a particular subclause of Part 1 is not mentioned in this Part 2-6, that subclause applies as far as
21 relevant. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1
22 is to be adapted accordingly.
23 The following print types are used:
24 - requirements; in roman type
25 - test specifications: in italic type;
26 - notes: in smaller roman type.
27 The terms defined in Clause 3 are printed in bold typeface.
28 Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting
29 from 101.
30 Clauses, subclauses, notes, tables, figures and annexes which are additional to those in
31 IEC 62841-2-6:20XX are prefixed “Z”.
32 This European Standard follows the overall requirements of EN ISO 12100.
2

---------------------- Page: 4 ----------------------
oSIST prEN IEC 62841-2-6:2019/oprAA:2019
prEN IEC 62841-2-6:2019/prAA:2019 (E)
33 This document has been prepared under a mandate given to CENELEC by the European Commission
34 and the European Free Trade Association, and supports essential requirements of EU Directive(s).
35 For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
36 document.
37 Compliance with the clauses of Part 1 together with this Part 2-6 provides one means of conforming with
38 the essential health and safety requirements of the Directive concerned.
3

---------------------- Page: 5 ----------------------
oSIST prEN IEC 62841-2-6:2019/oprAA:2019
prEN IEC 62841-2-6:2019/prAA:2019 (E)
39 1 Modification to Clause 1, “Scope”
40 Add the following to the existing Clause 1:
41 “This document covers all significant hazards, hazardous situations or hazardous events relevant for
42 machines covered by this standard.
43 NOTE Z102 Essential requirements not mentioned in Table ZZ.1 are deemed to be not applicable, becaus
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.