Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

This part of EN 12200 gives guidance for the assessment of conformity of formulations, products, joints and assemblies in accordance with EN 12200 1:2016 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of third-party certification procedures.
NOTE   In order to help the reader, a basic test matrix is given in Annex A.
In conjunction with EN 12200 1:2016, this document is applicable to piping systems made of unplasticized poly(vinyl chloride) (PVC-U) intended to be used for above ground external rainwater, and to fittings and brackets made of acrylic materials which may be used in combination with the pipes.

Kunststoff-Rohrleitungssysteme für außenliegende Regenfalleitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 2: Empfehlungen für die Beurteilung der Konformität

Dieser Teil der EN 12200 gibt Empfehlungen für die Beurteilung der Konformität von Formmassen, Erzeugnissen, Verbindungen und Bauteilkombinationen, die, in Übereinstimmung mit EN 12200-1:2016, für eine Einbeziehung in den Qualitätssicherungsplan des Herstellers als Teil des Qualitätsmanagementsystems und für die Erstellung von Drittstellenzertifizierungsverfahren vorgesehen sind.
ANMERKUNG   Zur Unterstützung des Lesers enthält Anhang A einen Überblick über das Prüfsystem.
Dieses Dokument gilt in Verbindung mit EN 12200-1:2016 für Rohrleitungssysteme aus weichmacherfreiem Polyvinylchlorid (PVC-U), die für außen liegende Regenfallleitungen vorgesehen sind, und für Formstücke und Rohrschellen aus Acrylwerkstoffen, die in Verbindung mit den Rohren verwendet werden dürfen.

Systèmes de canalisations de descentes d’eaux pluviales en plastique à usage externe en aérien - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 2 : Guide pour l'évaluation de la conformité

Cevni sistemi iz polimernih materialov za odvod padavinskih voda za zunanjo uporabo - Nemehčan polivinilklorid (PVC-U) - 2. del: Smernice za ugotavljanje skladnosti

Ta del standarda EN 12200 vsebuje navodila za ugotavljanje skladnosti formulacij, izdelkov, spojev in sestavov s standardom EN 12200 1:2016, ki naj bi se vključila v poslovnik kakovosti proizvajalca kot del sistema vodenja kakovosti, vsebuje pa tudi navodila za vzpostavitev postopka certificiranja, ki ga izvajajo tretje osebe.
OPOMBA   V pomoč bralcem dodatek A vsebuje osnovno preskusno matriko.
Ta dokument se v povezavi s standardom EN 12200 1:2016 uporablja za cevne sisteme iz nemehčanega polivinilklorida (PVC-U), ki so namenjeni za uporabo kot nadzemni zunanji sistemi za padavinske vode, ter za fitinge in nosilce iz akrilnih materialov, ki se lahko uporabljajo skupaj s cevmi.

General Information

Status
Published
Public Enquiry End Date
29-Oct-2016
Publication Date
27-Feb-2017
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Feb-2017
Due Date
28-Apr-2017
Completion Date
28-Feb-2017

Relations

Buy Standard

Technical specification
kTS FprCEN/TS 12200-2:2016
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Technical specification
TS CEN/TS 12200-2:2017
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 12200-2:2016
01-oktober-2016
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DRGYRGSDGDYLQVNLKYRGD]D]XQDQMR
XSRUDER1HPHKþDQSROLYLQLONORULG 39&8 GHO6PHUQLFH]DXJRWDYOMDQMH
VNODGQRVWL
Plastics rainwater piping systems for above ground external use - Unplasticized poly
(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
Kunststoff-Rohrleitungssysteme für außenliegende Regenfalleitungen -
Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 2: Empfehlungen für die Beurteilung
der Konformität
Systèmes de canalisations de descentes d’eaux pluviales en plastique à usage externe
en aérien - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 2 : Guide pour
l'évaluation de la conformité
Ta slovenski standard je istoveten z: FprCEN/TS 12200-2
ICS:
23.040.03 Cevovodi za zunanje sisteme Pipeline and its parts for
transporta vode in njihovi deli external water conveyance
systems
kSIST-TS FprCEN/TS 12200-2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016

---------------------- Page: 2 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016


FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 12200-2
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

August 2016
ICS 23.040.01 Will supersede CEN/TS 12200-2:2003
English Version

Plastics rainwater piping systems for above ground
external use - Unplasticized poly(vinyl chloride) (PVC-U) -
Part 2: Guidance for the assessment of conformity
Systèmes de canalisations de descentes d'eaux Kunststoff-Rohrleitungssysteme für außenliegende
pluviales en plastique à usage externe en aérien - Regenfalleitungen - Weichmacherfreies
Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie Polyvinylchlorid (PVC-U) - Teil 2: Empfehlungen für
2 : Guide pour l'évaluation de la conformité die Beurteilung der Konformität


This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 155.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 12200-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016
FprCEN/TS 12200-2:2016 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions, . 6
4 Abbreviated terms . 9
5 General . 10
6 Testing and inspection . 10
6.1 Material specification . 10
6.1.1 PVC-U material . 10
6.1.2 Acrylic material . 11
6.1.3 Other material . 11
6.2 Grouping . 12
6.2.1 General . 12
6.2.2 Size groups . 12
6.2.3 Fitting groups . 12
6.3 Type testing . 12
6.4 Batch release tests . 16
6.5 Process verification tests . 17
6.6 Audit tests . 18
6.7 Indirect tests (IT) . 19
6.8 Test records . 19
Annex A (informative) Basic test matrix . 20
Bibliography . 21

2

---------------------- Page: 4 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016
FprCEN/TS 12200-2:2016 (E)
European foreword
This document (FprCEN/TS 12200-2:2016) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems”, the secretariat of which is held by NEN.
This document is currently submitted to the vote.
This document will supersede CEN/TS 12200-2:2003.
Compared with CEN/TS 12200-2:2003, the following changes have been made:
a) use of the template drafted by CEN/TC 155/WG 21 for assessment of conformity documents
(change of “Terms and definitions” and addition of 1 column “Sampling procedures” in Tables);
b) introduction of “Limits of addition of PVC reprocessed and recycled material” in a separate table
(Table 2);
c) addition of an informative Annex A: Basic test matrix.
EN 12200 consists of the following Parts, under the general title “Plastics rainwater piping systems for
above ground external use — Unplasticized poly (vinyl chloride) (PVC-U)”.
— Part 1: Specifications for pipes, fittings and the system;
— Part 2: Guidance for the assessment of conformity;
3

---------------------- Page: 5 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016
FprCEN/TS 12200-2:2016 (E)
Introduction
Figures 1 and 2 are intended to provide general information on the concept of testing and organization
of those tests used for the purpose of the assessment of conformity. For each type of test, i.e. type test
(TT), batch release test (BRT), process verification test (PVT) and audit test (AT), this part of EN 12200
details the applicable characteristics to be assessed and the frequency and sampling of testing.
A typical scheme for the assessment of conformity of materials (formulations), pipes, fittings or
assemblies by manufacturers is given in Figure 1.

Figure 1 — Typical scheme for the assessment of conformity by a manufacturer
A typical scheme for the assessment of conformity of materials (formulations), pipes, fittings, valves or
assemblies by manufacturers, including a third-party certification, is given in Figure 2.
4

---------------------- Page: 6 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016
FprCEN/TS 12200-2:2016 (E)

Figure 2 — Typical scheme for the assessment of conformity by a manufacturer, including
certification
5

---------------------- Page: 7 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016
FprCEN/TS 12200-2:2016 (E)
1 Scope
This part of EN 12200 gives guidance for the assessment of conformity of formulations, products, joints
and assemblies in accordance with EN 12200-1:2016 intended to be included in the manufacturer’s
quality plan as part of the quality management system and for the establishment of third-party
certification procedures.
NOTE In order to help the reader, a basic test matrix is given in Annex A.
In conjunction with EN 12200-1:2016, this document is applicable to piping systems made of
unplasticized poly(vinyl chloride) (PVC-U) intended to be used for above ground external rainwater,
and to fittings and brackets made of acrylic materials which may be used in combination with the pipes.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 12200-1:2016, Plastics rainwater piping systems for above ground external use - Unplasticized
poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3 Terms and definitions,
For the purposes of this document, the terms and definitions given in EN 12200-1:2016, and the
following apply.
3.1
certification body
impartial body, governmental or non-governmental, possessing the necessary competence and
responsibility to carry out certification of conformity according to given rules of procedure and
management
Note 1 to entry: A certification body is preferably accredited to EN ISO/IEC 17021 [4].
3.2
inspection body
body, that performs inspection
[SOURCE: EN ISO/IEC 17020:2012 [5], 2.2]
Note 1 to entry: A body can be an organization, or part of an organization.
Note 2 to entry: A inspection body is preferably compliant with [EN] ISO/IEC 17020 [5].
3.3
testing laboratory
laboratory which measures, tests, calibrates or otherwise determines the characteristics of the
performance of materials and products
Note 1 to entry: In the context of this part of [X], the materials and products can be subjected to type testing,
batch release testing, process verification testing, audit testing, and witness testing, as applicable.
Note 2 to entry: A testing laboratory is preferably compliant with EN ISO/IEC 17025 [6].
6

---------------------- Page: 8 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016
FprCEN/TS 12200-2:2016 (E)
3.4
quality management system
management system to direct and control an organization with regard to quality
[SOURCE: EN ISO 9000:2015 [7], 3.2.3]
Note 1 to entry: Requirements for quality management systems are given in EN ISO 9001 [1].
3.5
quality plan
document setting out the specific quality practices, resources and sequence of activities relevant to a
particular product or range of products
3.6
type testing
TT
testing performed to prove that the formulation, product, joint or assembly is capable of conforming to
the requirements given in the relevant standard
Note 1 to entry: The type test results remain valid until there is a change in the material or product or assembly
provided that the process verification tests are done regularly.
3.7
batch release test
BRT
test performed by or on behalf of the manufacturer on a batch of materials or products, which needs to
be satisfactorily completed before the batch can be released
3.8
process verification test
PVT
test performed by, or on behalf of the manufacturer on materials, products or joints or assemblies at
specific intervals to confirm that the process continues to be capable of producing products which
conform to the requirements given in the relevant standard
Note 1 to entry: Such tests are not required to release batches of materials or products; rather they are carried
out as a measure of process control.
3.9
audit test
AT
test performed by a test laboratory on behalf of an inspection body or certification body to confirm that
the material, product, joint or assembly continues to conform to the requirements given in the relevant
standard and to provide information to assess the effectiveness of the quality management system
3.10
indirect test
IT
test performed by or on behalf of the manufacturer, different from that specified test for that particular
characteristic, having previously verified its correlation with the specified test
7

---------------------- Page: 9 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016
FprCEN/TS 12200-2:2016 (E)
3.11
witness test
WT
test accepted by an inspection or a certification body for type testing and/or audit testing, which is
carried out by or on behalf of the manufacturer and supervised by a representative of the inspection or
certification body, qualified in testing
3.12
material
generic term for formulations grouped by families, expressed by generic names, e.g. poly(vinyl chloride)
(PVC), stainless steel, brass or EPDM
Note 1 to entry: Definition from European Commission, Directorate-General for Enterprise and Industry, Sub-
group on Product Testing Procedures (EC, DG ENT and IND, SG PTP).]
3.13
formulation
clearly defined homogenous mixture of base polymer with additives, i.e. anti-oxidants, pigments,
stabilizers and others, at a dosage level necessary for the processing and the intended use of the final
product
Note 1 to entry: The term “compound” is sometime used with similar meaning as “formulation”.
3.14
material batch
clearly identified quantity of a given homogeneous formulation manufactured under uniform conditions
and defined and identified by the formulation manufacturer
3.15
product
pipe or fitting of a clearly identified type intended to be a part of a piping system which the
manufacturer puts on the market
3.16
product batch
clearly identified collection of products, manufactured consecutively or continuously under the same
conditions, using the same formulations and conforming to the same specification
Note 1 to entry: The production batch is defined and identified by the product manufacturer.
3.17
sample
one or more products drawn from the same production batch, selected at random without regard to
their quality
Note 1 to entry: The number of products in the sample is the sample size.
3.18
group
collection of similar products from which samples are selected for testing purposes
8

---------------------- Page: 10 ----------------------

kSIST-TS FprCEN/TS 12200-2:2016
FprCEN/TS 12200-2:2016 (E)
3.19
component
product manufactured out of a specific formulation, brought to the market as part of another product or
as a spare part
3.20
joint
connection between two products
3.21
assembly
product that can be dismantled into a set of components
EXAMPLE A test piece consisting of various products.
3.22
sampling plan
specification of the type of sampling to be used in combination with the operational specification of the
entities or increments to be taken, the samples to be constituted and the measurements or tests to be
made
EXAMPLE A specific plan which indicates the number of units of products or assemblies to be inspected.
3.23
product type
generic description of a product
EXAMPLE A pipe or its main parts, of the same design, from a particular formulation.
3.24
cavity
(moulding) space within a mould to be filled to form the moulded product
EXAMPLE That part of the injection mould which gives the form to the injection moulded product.
4 Abbreviated terms
To avoid misunderstanding, the abbreviations in this clause are defined as being the same in each
language. For the same reason, the terms are given in the three languages, English, French and German.
 EN FR DE
AT audit test essai d’audit Überwachungsprüfung
BRT batch release test essai de libération de campagne de Freigabeprüfung einer Charge
fabrication
IT indirect test essai indirect indirekte Prüfung
PVT process verification essai de vérification du procédé de Prozessüberprüfung
test fabrication
TT type test essai de type Typprüfung
WT witness testing essai témoin Prüfung unter Aufsicht
9

------------------
...

SLOVENSKI STANDARD
SIST-TS CEN/TS 12200-2:2017
01-april-2017
1DGRPHãþD
SIST- TS CEN/TS 12200-2:2003
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DRGYRGSDGDYLQVNLKYRGD]D]XQDQMR
XSRUDER1HPHKþDQSROLYLQLONORULG 39&8 GHO6PHUQLFH]DXJRWDYOMDQMH
VNODGQRVWL
Plastics rainwater piping systems for above ground external use - Unplasticized poly
(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
Kunststoff-Rohrleitungssysteme für außenliegende Regenfalleitungen -
Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 2: Empfehlungen für die Beurteilung
der Konformität
Systèmes de canalisations de descentes d’eaux pluviales en plastique à usage externe
en aérien - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 2 : Guide pour
l'évaluation de la conformité
Ta slovenski standard je istoveten z: CEN/TS 12200-2:2017
ICS:
23.040.03 Cevovodi za zunanje sisteme Pipeline and its parts for
transporta vode in njihovi deli external water conveyance
systems
SIST-TS CEN/TS 12200-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 12200-2:2017

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 12200-2:2017


CEN/TS 12200-2
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

February 2017
TECHNISCHE SPEZIFIKATION
ICS 23.040.05 Supersedes CEN/TS 12200-2:2003
English Version

Plastics rainwater piping systems for above ground
external use - Unplasticized poly(vinyl chloride) (PVC-U) -
Part 2: Guidance for the assessment of conformity
Systèmes de canalisations de descentes d'eaux Kunststoff-Rohrleitungssysteme für außenliegende
pluviales en plastique à usage externe en aérien - Regenfallleitungen - Weichmacherfreies
Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie Polyvinylchlorid (PVC-U) - Teil 2: Empfehlungen für
2 : Guide pour l'évaluation de la conformité die Beurteilung der Konformität
This Technical Specification (CEN/TS) was approved by CEN on 4 December 2016 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 12200-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 12200-2:2017
CEN/TS 12200-2:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions, . 6
4 Abbreviated terms . 9
5 General . 9
6 Testing and inspection . 9
6.1 Material specification . 9
6.1.1 PVC-U material . 9
6.1.2 Acrylic material . 10
6.1.3 Other material . 11
6.2 Grouping . 11
6.2.1 General . 11
6.2.2 Size groups . 11
6.2.3 Fitting groups . 11
6.3 Type testing . 11
6.4 Batch release tests . 14
6.5 Process verification tests . 15
6.6 Audit tests . 16
6.7 Indirect tests (IT) . 18
6.8 Test records . 18
Annex A (informative) Basic test matrix . 19
Bibliography . 20

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 12200-2:2017
CEN/TS 12200-2:2017 (E)
European foreword
This document (CEN/TS 12200-2:2017) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 12200-2:2003.
Compared with CEN/TS 12200-2:2003, the following changes have been made:
a) use of the template drafted by CEN/TC 155/WG 21 for assessment of conformity documents
(change of “Terms and definitions” and addition of 1 column “Sampling procedures” in Tables);
b) introduction of “Limits of addition of PVC reprocessed and recycled material” in a separate table
(Table 2);
c) addition of an informative Annex A: Basic test matrix.
EN 12200 consists of the following Parts, under the general title “Plastics rainwater piping systems for
above ground external use — Unplasticized poly (vinyl chloride) (PVC-U)”.
— Part 1: Specifications for pipes, fittings and the system;
— Part 2: Guidance for the assessment of conformity;
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 12200-2:2017
CEN/TS 12200-2:2017 (E)
Introduction
Figures 1 and 2 are intended to provide general information on the concept of testing and organization
of those tests used for the purpose of the assessment of conformity. For each type of test, i.e. type test
(TT), batch release test (BRT), process verification test (PVT) and audit test (AT), this part of EN 12200
details the applicable characteristics to be assessed and the frequency and sampling of testing.
A typical scheme for the assessment of conformity of materials (formulations), pipes, fittings or
assemblies by manufacturers is given in Figure 1.

Figure 1 — Typical scheme for the assessment of conformity by a manufacturer
A typical scheme for the assessment of conformity of materials (formulations), pipes, fittings, valves or
assemblies by manufacturers, including a third-party certification, is given in Figure 2.
4

---------------------- Page: 6 ----------------------

SIST-TS CEN/TS 12200-2:2017
CEN/TS 12200-2:2017 (E)

Figure 2 — Typical scheme for the assessment of conformity by a manufacturer, including
certification
1 Scope
This part of EN 12200 gives guidance for the assessment of conformity of formulations, products, joints
and assemblies in accordance with EN 12200-1:2016 intended to be included in the manufacturer’s
quality plan as part of the quality management system and for the establishment of third-party
certification procedures.
NOTE In order to help the reader, a basic test matrix is given in Annex A.
In conjunction with EN 12200-1:2016, this document is applicable to piping systems made of
unplasticized poly(vinyl chloride) (PVC-U) intended to be used for above ground external rainwater,
and to fittings and brackets made of acrylic materials which may be used in combination with the pipes.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 12200-1:2016, Plastics rainwater piping systems for above ground external use - Unplasticized
poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
5

---------------------- Page: 7 ----------------------

SIST-TS CEN/TS 12200-2:2017
CEN/TS 12200-2:2017 (E)
3 Terms and definitions,
For the purposes of this document, the terms and definitions given in EN 12200-1:2016, and the
following apply.
3.1
certification body
impartial body, governmental or non-governmental, possessing the necessary competence and
responsibility to carry out certification of conformity according to given rules of procedure and
management
Note 1 to entry: A certification body is preferably accredited to EN ISO/IEC 17021 [2].
3.2
inspection body
body, that performs inspection
[SOURCE: EN ISO/IEC 17020:2012 [3], 2.2]
Note 1 to entry: A body can be an organization, or part of an organization.
Note 2 to entry: A inspection body is preferably compliant with EN ISO/IEC 17020 [3].
3.3
testing laboratory
laboratory which measures, tests, calibrates or otherwise determines the characteristics of the
performance of materials and products
Note 1 to entry: In the context of this part of EN 12202, the materials and products can be subjected to type
testing, batch release testing, process verification testing, audit testing, and witness testing, as applicable.
Note 2 to entry: A testing laboratory is preferably compliant with EN ISO/IEC 17025 [4].
3.4
quality management system
management system to direct and control an organization with regard to quality
[SOURCE: EN ISO 9000:2015 [5], 3.2.3]
Note 1 to entry: Requirements for quality management systems are given in EN ISO 9001 [1].
3.5
quality plan
document setting out the specific quality practices, resources and sequence of activities relevant to a
particular product or range of products
3.6
type testing
TT
testing performed to prove that the formulation, product, joint or assembly is capable of conforming to
the requirements given in the relevant standard
Note 1 to entry: The type test results remain valid until there is a change in the material or product or assembly
provided that the process verification tests are done regularly.
6

---------------------- Page: 8 ----------------------

SIST-TS CEN/TS 12200-2:2017
CEN/TS 12200-2:2017 (E)
3.7
batch release test
BRT
test performed by or on behalf of the manufacturer on a batch of materials or products, which needs to
be satisfactorily completed before the batch can be released
3.8
process verification test
PVT
test performed by, or on behalf of the manufacturer on materials, products or joints or assemblies at
specific intervals to confirm that the process continues to be capable of producing products which
conform to the requirements given in the relevant standard
Note 1 to entry: Such tests are not required to release batches of materials or products; rather they are carried
out as a measure of process control.
3.9
audit test
AT
test performed by a test laboratory on behalf of an inspection body or certification body to confirm that
the material, product, joint or assembly continues to conform to the requirements given in the relevant
standard and to provide information to assess the effectiveness of the quality management system
3.10
indirect test
IT
test performed by or on behalf of the manufacturer, different from that specified test for that particular
characteristic, having previously verified its correlation with the specified test
3.11
witness test
WT
test accepted by an inspection or a certification body for type testing and/or audit testing, which is
carried out by or on behalf of the manufacturer and supervised by a representative of the inspection or
certification body, qualified in testing
3.12
material
generic term for formulations grouped by families, expressed by generic names, e.g. poly(vinyl chloride)
(PVC), stainless steel, brass or EPDM
Note 1 to entry: Definition from European Commission, Directorate-General for Enterprise and Industry, Sub-
group on Product Testing Procedures (EC, DG ENT and IND, SG PTP).]
3.13
formulation
clearly defined homogenous mixture of base polymer with additives, i.e. anti-oxidants, pigments,
stabilizers and others, at a dosage level necessary for the processing and the intended use of the final
product
Note 1 to entry: The term “compound” is sometime used with similar meaning as “formulation”.
7

---------------------- Page: 9 ----------------------

SIST-TS CEN/TS 12200-2:2017
CEN/TS 12200-2:2017 (E)
3.14
material batch
clearly identified quantity of a given homogeneous formulation manufactured under uniform conditions
and defined and identified by the formulation manufacturer
3.15
product
pipe or fitting of a clearly identified type intended to be a part of a piping system which the
manufacturer puts on the market
3.16
product batch
clearly identified collection of products, manufactured consecutively or continuously under the same
conditions, using the same formulations and conforming to the same specification
Note 1 to entry: The production batch is defined and identified by the product manufacturer.
3.17
sample
one or more products drawn from the same production batch, selected at random without regard to
their quality
Note 1 to entry: The number of products in the sample is the sample size.
3.18
group
collection of similar products from which samples are selected for testing purposes
3.19
component
product manufactured out of a specific formulation, brought to the market as part of another product or
as a spare part
3.20
joint
connection between two products
3.21
assembly
product that can be dismantled into a set of components
EXAMPLE A test piece consisting of various products.
3.22
sampling plan
specification of the type of sampling to be used in combination with the operational specification of the
entities or increments to be taken, the samples to be constituted and the measurements or tests to be
made
EXAMPLE A specific plan which indicates the number of units of products or assemblies to be inspected.
3.23
product type
generic description of a product
8

---------------------- Page: 10 ----------------------

SIST-TS CEN/TS 12200-2:2017
CEN/TS 12200-2:2017 (E)
EXAMPLE A pipe or its main parts, of the same design, from a particular formulation.
3.24
cavity
(moulding) space within a mould to be filled to form the moulded product
EXAMPLE That part of the injection mould which gives the form to the injection moulded product.
4 Abbre
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.