SIST EN IEC 63078:2020

Oznaka standarda: SIST EN IEC 63078:2020
Koda projekta: 64812
Organizacija: SIST
Naslov (angleški): Installations for electroheating and electromagnetic processing - Test methods for induction through-heating installations (IEC 63078:2019)
Naslov (slovenski): Naprave za električno ogrevanje in elektromagnetno obdelavo - Preskusne metode za indukcijske naprave za segrevanje (IEC 63078:2019)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Ime Jezik Status Cena Dodaj v košarico
SIST EN IEC 63078:2020 angleški jezik Active SIST-H: 78.65 EUR
Tehnični odbor: I09 - Imaginarni 09
ICS: 25.180.10 97.100.01
Status: Objavljen
Objavljen: 01-maj-2020
Refer. št. objave: Sporocila 2020-05
Referenčna oznaka: EN IEC 63078:2020
Področje projekta (angleško): EN-IEC 62282-8-201 defines the evaluation methods of typical performances for electricenergy storage systems using hydrogen. This is applicable to the systems that useelectrochemical reaction devices for both power charge and discharge. This document appliesto systems that are designed and used for service and operation in stationary locations (indoorand outdoor).The conceptual configurations of the electric energy storage systems using hydrogen are shownin Figure 1 and Figure 2. Figure 1 shows the system independently equipped with an electrolysermodule and a fuel cell module. Figure 2 shows the system equipped with a reversible cellmodule. There are an electrolyser, a hydrogen storage and a fuel cell, or a reversible cell, ahydrogen storage and an overall management system (which may include a pressuremanagement) as indispensable components. There may be a battery, an oxygen storage, a heatmanagement system (which may include a heat storage) and a water management system(which may include a water storage) as optional components. The performance measurement isexecuted in the area surrounded by the outside thick solid line square (system boundary).NOTE In the context of this document, the term "reversible" does not refer to the thermodynamic meaning of an idealprocess. It is common practice in the fuel cell community to call the operation mode of a cell that alternates betweenfuel cell mode and electrolysis mode "reversible".This document is intended to be used for data exchanges in commercial transactions betweenthe system manufacturers and customers. Users of this document can selectively execute testitems suitable for their purposes from those described in this document.

Najbolje prodajani standardi