SIST EN 1270:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Spielfeldgeräte - Basketballgeräte - Funktionelle und sicherheitstechnische Anforderungen, PrüfverfahrenEquipements de jeux - Equipements de basket-ball - Exigences fonctionnelles et de sécurité, méthodes d'essaisPlaying field equipment - Basketball equipment - Functional and safety requirements, test methods97.220.30Oprema za dvoranske športeIndoor sports equipmentICS:Ta slovenski standard je istoveten z:EN 1270:2005SIST EN 1270:2006en,fr,de01-februar-2006SIST EN 1270:2006SLOVENSKI
STANDARDSIST EN 1270:1998/A1:2002SIST EN 1270:19981DGRPHãþD



SIST EN 1270:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1270October 2005ICS 97.220.30Supersedes EN 1270:1998
English VersionPlaying field equipment - Basketball equipment - Functional andsafety requirements, test methodsEquipements de jeux - Equipements de basket-ball -Exigences fonctionnelles et de sécurité, méthodes d'essaisSpielfeldgeräte - Basketballgeräte - Funktionelle undsicherheitstechnische Anforderungen, PrüfverfahrenThis European Standard was approved by CEN on 26 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1270:2005: ESIST EN 1270:2006



EN 1270:2005 (E) 2
Contents Foreword.3 1 Scope.4 2 Normative references.4 3 Requirements.4 4 Safety requirements.12 5 Test methods.15 6 Instruction for use.17 7 Warning label.17 8 Marking.17 Annex A (informative)
Examples of design.18 Annex B (informative)
Choice-table for basketball equipment.19 Annex C (informative)
A-Deviation.20
SIST EN 1270:2006



EN 1270:2005 (E)
3 Foreword This European Standard (EN 1270:2005) has been prepared by Technical Committee CEN/TC 136 “Sports, play-ground and other recreational equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April 2006. Regarding types 1 and 2 France asked for a national deviation due to a French national regulation (decree
no 96-465 of June 4, 1996), see Annex C. This document supersedes EN 1270:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto-nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1270:2006



EN 1270:2005 (E) 4
1 Scope This European Standard specifies functional requirements (see Clause 3) and safety requirements (see Clause 4) for basketball equipment. This European Standard is applicable to 8 types of basketball equipment within the classes A to E (see 3.1). This European Standard is not applicable to home basketball equipment, which is considered to be covered by EN 71-1, and to ball throwing equipment. NOTE The intended use of ball throwing equipment is for the purpose of practising attempts to propel the basketball into the basket. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 913:1996, Gymnastic equipment — General safety requirements and test methods. EN 10025-1, Hot-rolled products of structural steels — Part 1: General technical delivery conditions. EN 10025-2, Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels. EN ISO 2062, Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break (ISO 2062:1993). 3 Requirements 3.1 Classification Basketball equipment shall be classified by the design (types) and the free space (see Table 2) as typical perform-ance criterion (classes) as shown in Tables 1 and 2. Table 1 — Types Type Description Example 1 freestanding 3 250 mm and 2 250 mm extension figure 1 2 freestanding (other extensions) figure 2 3 folding figure 3 4 fixed wall mounted figure 4 5 ceiling mounted figure 5 6 removable with sockets figure 6 7 fixed in the ground figure 7 8 adjustable with height setting from 2 600 mm to 3 050 mm
NOTE Specifications concerning fixing are under preparation
SIST EN 1270:2006



EN 1270:2005 (E)
5 Table 2 — Classes
Dimensions in millimetres Class Free space min. Remark A 3 250 a B 2 250
C 1 650
D 1 200
E 600 to 1 200
a in line with/with interpretation of FIBA (Fédération Internationale de Basketball) rules
Rings shall be classified as either: a) fixed rings; or b) pressure release rings.
Figure 1 — Example of type 1 Figure 2 — Example of type 2 Figure 3 — Example of type 3 SIST EN 1270:2006



EN 1270:2005 (E) 6
Figure 4 — Example of type 4 Figure 5 — Example of type 5 Figure 6 — Example of type 6
Figure 7 — Example of type 7 3.2 Dimensions Basketball equipment shall comply with the dimensions shown in Figures 8 to 11 and Tables 3 and 4. A complete set of basketball equipment shall have the following components: a) 1 backboard; b) 1 ring; c) 1 net; d) the supporting frame; e) stability devices. SIST EN 1270:2006



EN 1270:2005 (E)
7
a) Backboard 1 800 mm × 1 050 mm b) Backboard 1 800 mm × 1 200 mm Figure 8 — Main functional dimensions for classes A to D
Table 3 — Main functional dimensions for classes A to D Dimensions in millimetres Nominal size Nominal dimension h1 ± 6
h2 ± 6 Type 3 050 3 050 2 900 (2 750)a 1 to 7 3 050/2 600 2 600 2 450 (2 300)a 8 a for backboard height = 1 200 mm
SIST EN 1270:2006



EN 1270:2005 (E) 8
Figure 9 — Dimensions of backboard and markings
Table 4 — Dimensions of backboard and markings Dimensions in millimetres Backboard Markings l1 h1 l2 h2 h3 h4 l3 1 800 1 050
590 450 150 50 50 (1 800)a
(1 200)a 590 450 300 50 50 1 200
900 — — — — — 1 100
700 — — — — —
900
600 — — — — — any other any other — — — — — a For replacement only. Since 1998-07-26 not permitted according to the official rules of FIBA
SIST EN 1270:2006



EN 1270:2005 (E)
9 Dimensions in millimetres
Figure 10 — Ring mounting plate for classes A, B and C (classes D and E are not restricted) NOTE The hole pattern as drawn in Figure 10 is a conclusion of all existing hole patterns (agreed with FIBA and FIBA rules). Any hole pattern shall be within those dimensions. Fixing of a board need not be done by holes. Any other fixing is allowed provided that the safety requirements are taken into consideration. SIST EN 1270:2006



EN 1270:2005 (E) 10
Dimensions in millimetres
Key 1 fixing plate Figure 11 — Ring 3.3 Material 3.3.1 Backboard The materials for the backboard shall comply with 3.4.1. 3.3.2 Ring For classes A and B the rings shall be made of solid steel, to at least S 235 JR as specified in EN 10025. 3.3.3 Net The net shall be made of synthetic or natural fibres. SIST EN 1270:2006



EN 1270:2005 (E)
11 3.4 Design 3.4.1 Backboard 3.4.1.1 For the backboard the colours of Table 5 shall be used. Table 5 — Colours
Class A Material Front Markings timber white black synthetics or composit white black synthetics transparent colourless white safety glass colourless, clear view without distortion white metal white black
3.4.1.2 The front of the backboard, directed towards the playing court, shall be flat. 3.4.2 Ring For classes A and B the colour of the ring shall be orange. For classes A and B, 12 net fixings shall be equally spaced on the underside of the ring element. When tested in accordance with 5.2.2, pressure release rings, after release and with the load no longer applied, shall return automatically and instantly to the original position. When tested in accordance with 5.2.3, all rings shall show no rupture and no permanent deformation of more than 10 mm. 3.4.3 Nets in classes A to D The colour of the net shall be white. The net shall be made of net yarn with a breaking force of at le
...