Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (IEC 60384-21:2019)

This part of IEC 60384 is applicable to fixed unencapsulated surface mount multilayer
capacitors of ceramic dielectric, Class 1, for use in electronic equipment. These capacitors
have metallized connecting pads or soldering strips and are intended to be mounted on
printed boards, or directly onto substrates for hybrid circuits.
Capacitors for electromagnetic interference suppression are not included, but are covered by
IEC 60384-14.
The object of this document is to prescribe preferred ratings and characteristics and to select
from IEC 60384-1 the appropriate quality assessment procedures, tests and measuring
methods and to give general performance requirements for this type of capacitor. Test
severities and requirements prescribed in detail specifications referring to this sectional
specification are of equal or higher performance levels; lower performance levels are not
permitted.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 21: Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 1 (IEC 60384-21:2019)

Condensateurs fixes utilisés dans les équipements électroniques - Partie 21: Spécification intermédiaire: Condensateurs multicouches fixes à diélectriques en céramique pour montage en surface, de classe 1 (IEC 60384-21:2019)

IEC 60384-21:2019 est disponible sous forme de IEC 60384-21:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 60384-21:2019 est applicable aux condensateurs multicouches fixes à diélectriques en céramique pour montage en surface non encapsulés, Classe 1, utilisés dans les équipements électroniques. Ces condensateurs possèdent des pastilles de connexion métallisées ou des bandes de brasure et sont destinés à être montés sur des cartes imprimées ou directement sur des substrats de circuits hybrides. Les condensateurs d'antiparasitage ne sont pas inclus, mais ils sont couverts par l'IEC 60384-14. L'objet du présent document est de prescrire des caractéristiques et des valeurs assignées préférentielles et de sélectionner à partir de l'IEC 60384-1 les procédures d'assurance de la qualité, les essais et les méthodes de mesure appropriées et de donner les exigences de performance générales pour ce type de condensateur. Les exigences et les sévérités des essais prescrits dans les spécifications particulières se référant à la présente spécification intermédiaire sont d'un niveau de performance supérieur ou égal, des niveaux de performance inférieurs ne sont pas admis. La présente édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- révision de la structure conformément aux directives ISO/IEC, Partie 2:2016, dans la mesure du possible, et pour l'harmonisation avec l'IEC 60384-22;
- suppression de la description de la puissance réactive admissible en 6.2.2, parce qu'elle n'est pas adaptée aux besoins du présent document;
- les dimensions de 0201M à l'Annexe A ont été ajoutées.


Fiksni kondenzatorji za uporabo v elektronski opremi - 21. del: Področna specifikacija - Fiksni večplastni kondenzatorji za površinsko namestitev s keramičnim dielektrikom, razred 1 (IEC 60384-21:2019)

Ta del standarda IEC 60384 se uporablja za fiksne nezaprte večplastne kondenzatorje za površinsko namestitev s keramičnim dielektrikom razreda 1 za uporabo v elektronski opremi. Ti kondenzatorji imajo metalizirane priključne blazinice ali varilne trakove ter so namenjeni namestitvi na tiskana vezja ali neposredno na podlage za hibridne tokokroge.
Kondenzatorji za preprečevanje elektromagnetnih motenj niso vključeni, vendar so zajeti v standardu IEC 60384-14.
Cilj tega dokumenta je predpisati prednostne vrednosti in lastnosti, izbrati primerne postopke za ovrednotenje kakovosti, preskuse in merilne metode iz standarda IEC 60384-1 ter podati splošne zahteve glede zmogljivosti za ta tip kondenzatorja. Preskusne stopnje in zahteve, predpisane v podrobnih specifikacijah, ki se navezujejo na to področno specifikacijo, so enake ali višje ravni učinkovitosti; nižje ravni niso dovoljene.

General Information

Status
Published
Publication Date
01-Apr-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Mar-2019
Due Date
01-Jun-2019
Completion Date
02-Apr-2019

Relations

Buy Standard

Standard
EN IEC 60384-21:2019
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RGURþQDFestkondensatoren zur Verwendung in Geräten der Elektronik - Teil 21: Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 1 (IEC 60384-21:2019)Condensateurs fixes utilisés dans les équipements électroniques - Partie 21: Spécification intermédiaire: Condensateurs multicouches fixes à diélectriques en céramique pour montage en surface, de classe 1 (IEC 60384-21:2019)Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (IEC 60384-21:2019)31.060.10Fiksni kondenzatorjiFixed capacitorsICS:Ta slovenski standard je istoveten z:EN IEC 60384-21:2019SIST EN IEC 60384-21:2019en01-maj-2019SIST EN IEC 60384-21:2019SLOVENSKI
STANDARDSIST EN 60384-21:20121DGRPHãþD



SIST EN IEC 60384-21:2019



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 60384-21
March 2019 ICS 31.060.10
Supersedes
EN 60384-21:2012
English Version
Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (IEC 60384-21:2019)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 21: Spécification intermédiaire -Condensateurs multicouches fixes à diélectriques en céramique pour montage en surface, de classe 1 (IEC 60384-21:2019)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 21: Rahmenspezifikation - Oberflächenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 1 (IEC 60384-21:2019) This European Standard was approved by CENELEC on 2019-03-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60384-21:2019 E SIST EN IEC 60384-21:2019



EN IEC 60384-21:2019 (E) 2 European foreword The text of document 40/2639/FDIS, future edition 3 of IEC 60384-21, prepared by IEC/TC 40 "Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60384-21:2019. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-12-05 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2022-03-05
This document supersedes EN 60384-21:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60384-21:2019 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60384-14 NOTE Harmonized as EN 60384-14
SIST EN IEC 60384-21:2019



EN IEC 60384-21:2019 (E) 3 Annex ZA (normative)
Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60063 -
Preferred number series for resistors and capacitors EN 60063 -
IEC 60068-1 2013
Environmental testing - Part 1: General and guidance EN 60068-1 2014
IEC 60068-2-58 2015
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) EN 60068-2-58 2015
+ A1 2017
+ A1 2018
IEC 60384-1 2016
Fixed capacitors for use in electronic equipment - Part 1: Generic specification EN 60384-1 2016
IEC 61193-2 2007
Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages EN 61193-2 2007
ISO 3 1973
Preferred numbers - Series of preferred numbers - -
SIST EN IEC 60384-21:2019



SIST EN IEC 60384-21:2019



IEC 60384-21 Edition 3.0 2019-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment –
Part 21: Sectional specification – Fixed surface mount multilayer capacitors
of ceramic dielectric, Class 1
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 21: Spécification intermédiaire – Condensateurs multicouches fixes à diélectriques en céramique pour montage en surface, de Classe 1
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 31.060.10
ISBN 978-2-8322-6389-1
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN IEC 60384-21:2019



– 2 – IEC 60384-21:2019 © IEC 2019 CONTENTS FOREWORD . 6 1 Scope . 8 2 Normative references . 8 3 Terms and definitions . 8 4 Information to be given in a detail specification . 9 4.1 General . 9 4.2 Outline drawing and dimensions . 10 4.3 Mounting . 10 4.4 Rating and characteristics . 10 4.4.1 General . 10 4.4.2 Nominal capacitance range . 10 4.4.3 Particular characteristics . 10 4.4.4 Soldering . 10 4.5 Marking . 11 5 Marking . 11 5.1 General . 11 5.2 Information for marking . 11 5.3 Marking on the body . 11 5.4 Requirements for marking . 11 5.5 Marking of the packaging . 11 5.6 Additional marking . 11 6 Preferred ratings and characteristics . 11 6.1 Preferred characteristics . 11 6.2 Preferred values of ratings . 12 6.2.1 Rated temperature (TR) . 12 6.2.2 Rated voltage (UR) . 12 6.2.3 Category voltage (UC) . 12 6.2.4 Preferred values of nominal capacitance and associated tolerance values . 12 6.2.5 Temperature coefficient (α) . 13 6.2.6 Dimensions . 14 7 Quality assessment procedures . 15 7.1 Primary stage of manufacture . 15 7.2 Structurally similar components . 15 7.3 Certified records of released lots . 15 7.4 Qualification approval . 15 7.4.1 General . 15 7.4.2 Qualification approval on the basis of the fixed sample size procedures . 15 7.4.3 Tests . 16 7.5 Quality conformance inspection . 21 7.5.1 Formation of inspection lots . 21 7.5.2 Test schedule . 21 7.5.3 Delayed delivery . 21 7.5.4 Assessment levels . 21 8 Test and measurement procedures . 22 8.1 General . 22 SIST EN IEC 60384-21:2019



IEC 60384-21:2019 © IEC 2019 – 3 –
8.2 Preliminary drying . 22 8.3 Measuring conditions . 23 8.4 Mounting . 23 8.5 Visual examination and check of dimensions . 23 8.5.1 General . 23 8.5.2 Visual examination . 23 8.5.3 Requirements . 23 8.6 Electrical tests . 25 8.6.1 Capacitance . 25 8.6.2 Tangent of loss angle (tan δ) . 25 8.6.3 Insulation resistance . 26 8.6.4 Voltage proof . 26 8.7 Temperature coefficient (α) and temperature cycle drift . 27 8.7.1 General . 27 8.7.2 Preliminary drying . 27 8.7.3 Measuring conditions . 27 8.7.4 Requirements . 27 8.8 Shear test . 28 8.9 Substrate bending test . 28 8.9.1 General . 28 8.9.2 Initial measurement . 28 8.9.3 Final inspection . 28 8.10 Resistance to soldering heat . 28 8.10.1 General . 28 8.10.2 Initial measurement . 28 8.10.3 Test conditions . 28 8.10.4 Recovery . 30 8.10.5 Final inspection, measurements and requirements. 30 8.11 Solderability . 30 8.11.1 General . 30 8.11.2 Test conditions . 30 8.11.3 Recovery . 31 8.11.4 Final inspection, measurements and requirements. 31 8.12 Rapid change of temperature . 31 8.12.1 General . 31 8.12.2 Initial measurement . 31 8.12.3 Number of cycles . 31 8.12.4 Recovery . 32 8.12.5 Final inspection, measurements and requirements. 32 8.13 Climatic sequence. 32 8.13.1 General . 32 8.13.2 Initial measurement . 32 8.13.3 Dry heat . 32 8.13.4 Damp heat, cyclic, Test Db, first cycle . 32 8.13.5 Cold. 32 8.13.6 Damp heat, cyclic, Test Db, remaining cycles . 32 8.13.7 Final inspection, measurements and requirements. 33 8.14 Damp heat, steady state . 33 8.14.1 General . 33 SIST EN IEC 60384-21:2019



– 4 – IEC 60384-21:2019 © IEC 2019 8.14.2 Initial measurement . 33 8.14.3 Test conditions . 33 8.14.4 Recovery . 34 8.14.5 Final inspection, measurements and requirements. 34 8.15 Endurance . 34 8.15.1 General . 34 8.15.2 Initial measurement . 35 8.15.3 Test conditions . 35 8.15.4 Recovery . 35 8.15.5 Final inspection, measurements and requirements. 35 8.16 Robustness of terminations (only for capacitors with strip termination) . 36 8.16.1 General . 36 8.16.2 Test conditions . 36 8.16.3 Final inspection and requirements . 36 8.17 Component solvent resistance (if required) . 36 8.18 Solvent resistance of the marking (if required) . 36 8.19 Accelerated damp heat, steady state (if required) . 36 8.19.1 General . 36 8.19.2 Initial measurement . 37 8.19.3 Conditioning . 37 8.19.4 Recovery . 37 8.19.5 Final measurements . 37 Annex A (normative)
Guidance for the specification and coding of dimensions of fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 . 38 Annex B (informative)
Combination of temperature coefficient and tolerance for the reference temperature of 25 °C . 39 Annex X (informative)
Cross-reference for reference to IEC 60384-21:2011 . 40 Bibliography . 41
Figure 1 – Fault: crack or fissure. 23 Figure 2 – Fault: crack or fissure. 23 Figure 3 – Separation or delamination . 24 Figure 4 – Exposed electrodes . 24 Figure 5 – Principal faces . 24 Figure 6 – Reflow temperature profile . 29 Figure A.1 – Dimensions . 38
Table 1 – Preferred tolerances on nominal capacitance . 12 Table 2 – Nominal temperature coefficient and tolerance . 13 Table 3 – Combination of temperature coefficient and tolerance . 14 Table 4 – Fixed sample size test plan for qualification approval – Assessment level EZ . 17 Table 5 – Tests schedule for qualification approval . 18 Table 6 – Lot-by-lot inspection . 22 Table 7 – Periodic tests . 22 Table 8 – Tangent of loss angle limits . 25 Table 9 – Test voltages . 27 SIST EN IEC 60384-21:2019



IEC 60384-21:2019 © IEC 2019 – 5 –
Table 10 – Temperature cyclic drift limits . 28 Table 11 – Reflow temperature profiles for Sn-Ag-Cu alloy . 29 Table 12 – Maximum capacitance change . 30 Table 13 – Maximum capacitance change . 32 Table 14 – Number of damp heat cycles . 33 Table 15 – Final inspection, measurements and requirements . 33 Table 16 – Test conditions for damp heat, steady state . 34 Table 17 – Final inspection, measurements and requirements . 34 Table 18 – Endurance test conditions (UC = UR) . 35 Table 19 – Endurance test conditions (UC ≠ UR) . 35 Table 20 – Final inspection, measurements and requirements . 36 Table 21 – Initial requirements . 37 Table 22 – Conditioning . 37 Table A.1 – Dimensions . 38 Table B.1 – Combination of temperature coefficient and tolerance for the reference temperature of 25 °C . 39 Table X.1 – Reference to IEC 60384-21 for clause/subclause . 40 Table X.2 – Reference to IEC 60384-21 for figure/table . 40
SIST EN IEC 60384-21:2019



– 6 – IEC 60384-21:2019 © IEC 2019 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –
Part 21: Sectional specification –
Fixed surface mount multilayer capacitors
of ceramic dielectric, Class 1
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60384-21 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revision of the structure in accordance with ISO/IEC Directives, Part 2:2016 to the extent practicable, and for harmonizing with IEC 60384-22; b) deletion of the description on the permissible reactive power in 6.2.2 because it is not appropriate for the purposes of this document; SIST EN IEC 60384-21:2019



IEC 60384-21:2019 © IEC 2019 – 7 –
c) the dimensions of 0201M in Annex A have been added. The text of this International Standard is based on the following documents: FDIS Re
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.