SIST EN 12847:2022
(Main)Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
Bitumen and bituminous binders - Determination of settling tendency of bituminous emulsions
This document specifies a method for the determination of the settling tendency of bituminous emulsions.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Absetzverhaltens von Bitumenemulsionen
Dieses Dokument legt ein Verfahren zur Bestimmung des Absetzverhaltens von Bitumenemulsionen fest.
WARNUNG - Die Anwendung dieses Dokumentes kann die Anwendung gefährlicher Stoffe, Arbeitsgänge und Geräte mit sich bringen. Dieses Dokument beansprucht nicht, alle damit verbundenen Sicherheitsprobleme zu behandeln. Es liegt in der Verantwortung des Anwenders dieses Dokuments, geeignete Sicherheits und Gesundheitsschutz¬maßnahmen vorzusehen und im Vorfeld die Anwendbarkeit von einschränkenden Vorschriften zu klären.
Bitumes et liants bitumineux - Détermination de la tendance à la décantation des émulsions bitumineuses
Ce document spécifie une méthode pour la détermination de la tendance à la décantation des émulsions bitumineuses.
AVERTISSEMENT - L'utilisation de ce document implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. Le présent document n'est pas censé aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de son utilisateur d'établir des règles d'hygiène et de sécurité appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določanje težnje bitumenskih emulzij k posedanju
Ta dokument določa metodo za določanje težnje bitumenskih emulzij k posedanju.
OPOZORILO: Pri uporabi tega dokumenta so lahko prisotni nevarni materiali, postopki in oprema. Ta dokument ne obravnava vseh varnostnih težav, ki se navezujejo na njegovo uporabo. Za vzpostavitev ustreznih varnostnih in zdravstvenih praks ter za določitev uporabnosti regulativnih omejitev pred uporabo je odgovoren uporabnik tega dokumenta.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12847:2022
01-september-2022
Nadomešča:
SIST EN 12847:2009
Bitumen in bitumenska veziva - Določanje težnje bitumenskih emulzij k posedanju
Bitumen and bituminous binders - Determination of settling tendency of bituminous
emulsions
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Absetzverhaltens von
Bitumenemulsionen
Bitumes et liants bitumineux - Détermination de la tendance à la décantation des
émulsions bitumineuses
Ta slovenski standard je istoveten z: EN 12847:2022
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 12847:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12847:2022
---------------------- Page: 2 ----------------------
SIST EN 12847:2022
EN 12847
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2022
EUROPÄISCHE NORM
ICS 75.140; 91.100.50 Supersedes EN 12847:2009
English Version
Bitumen and bituminous binders - Determination of
settling tendency of bituminous emulsions
Bitumes et liants bitumineux - Détermination de la Bitumen und bitumenhaltige Bindemittel -
tendance à la décantation des émulsions bitumineuses Bestimmung des Absetzverhaltens von
Bitumenemulsionen
This European Standard was approved by CEN on 13 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12847:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12847:2022
EN 12847:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Sampling . 5
7 Procedure. 5
7.1 General . 5
7.2 Test . 5
8 Calculation . 6
9 Expression of results . 6
10 Precision . 6
10.1 General . 6
10.2 Repeatability . 6
10.3 Reproducibility . 7
11 Test report . 7
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 12847:2022
EN 12847:2022 (E)
European foreword
This document (EN 12847:2022) has been prepared by Technical Committee CEN/TC 336 “Bituminous
binders”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12847:2009.
The main technical change is the possibility of using drying balance (EN 16849) for determination of
water content in bituminous emulsions under certain conditions (for emulsions containing less than
1,5 % of a volatile flux) and with precautions to be taken (test temperature). The test method used for
the determination of water content (EN 1428 or EN 1431 or EN 16849) is mentioned in the test report.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 12847:2022
EN 12847:2022 (E)
1 Scope
This document specifies a method for the determination of the settling tendency of bituminous
emulsions.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This
document does not purport to address all of the safety problems associated with its use. It is the
responsibility of the user of this document to establish appropriate safety and health practices and to
determine the applicability of regulatory limitations prior to use.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirem
...
SLOVENSKI STANDARD
oSIST prEN 12847:2021
01-marec-2021
Bitumen in bitumenska veziva - Določanje težnje bitumenskih emulzij k posedanju
Bitumen and bituminous binders - Determination of settling tendency of bituminous
emulsions
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Absetzverhaltens von
Bitumenemulsionen
Bitumes et liants bitumineux - Détermination de la tendance à la décantation des
émulsions bitumineuses
Ta slovenski standard je istoveten z: prEN 12847
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN 12847:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12847:2021
---------------------- Page: 2 ----------------------
oSIST prEN 12847:2021
DRAFT
EUROPEAN STANDARD
prEN 12847
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 75.140; 91.100.50 Will supersede EN 12847:2009
English Version
Bitumen and bituminous binders - Determination of
settling tendency of bituminous emulsions
Bitumes et liants bitumineux - Détermination de la Bitumen und bitumenhaltige Bindemittel -
tendance à la décantation des émulsions bitumineuses Bestimmung des Absetzverhaltens von
Bitumenemulsionen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12847:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12847:2021
prEN 12847:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Reagents and materials . 5
5.1 General . 5
5.2 Cleaning agents . 5
6 Apparatus . 5
7 Sampling . 5
8 Procedure. 5
8.1 General . 5
8.2 Test . 5
9 Calculation . 6
10 Expression of results . 6
11 Precision . 7
11.1 General . 7
11.2 Repeatability . 7
11.3 Reproducibility . 7
12 Test report . 7
Bibliography . 9
2
---------------------- Page: 4 ----------------------
oSIST prEN 12847:2021
prEN 12847:2021 (E)
European foreword
This document (prEN 12847:2021) has been prepared by Technical Committee CEN/TC 336 “Bituminous
binders”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12847:2009.
The main technical change is the possibility of using drying balance (EN 16849) for determination of
water content in bituminous emulsions under certain conditions (for emulsions containing less than
1,5 % of a volatile flux) and with precautions to be taken (test temperature). The test method used for
the determination of water content (EN 1428 or EN 1431 or EN 16849) is mentioned in the test report.
3
---------------------- Page: 5 ----------------------
oSIST prEN 12847:2021
prEN 12847:2021 (E)
1 Scope
This document specifies a method for the determination of the settling tendency of bituminous
emulsions.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This
document does not purport to address all of the safety problems associated with its use. It is the
responsibility of the user of this document to establish appropriate safety and health practices and to
determine the applicability of regulatory limitations prior to use.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 58, Bitumen and bituminous binders - Sampling bituminous binders
E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.