Integrated Services Digital Network (ISDN); Meet-Me Conference (MMC) supplementary service; Functional capabilities and information flows

Stage 2 descriptions for priority 1 and 2 services covered in the MoU on ISDN

Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev konferenca s srečanjem (MMC) - Funkcijske zmožnosti in informacijski pretoki

General Information

Status
Published
Publication Date
30-Jun-1999
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-1999
Due Date
01-Jul-1999
Completion Date
01-Jul-1999

Buy Standard

Standard
P ETS 300 165:1998
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETS 300 165:1999
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Meet-Me Conference (MMC) supplementary service; Functional capabilities and information flows33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 165 E13SIST ETS 300 165:199en01-QRYHPEHU1993SIST ETS 300 165:199SLOVENSKI
STANDARD



SIST ETS 300 165:1999



EUROPEANETS 300 165TELECOMMUNICATIONMarch 1993STANDARDSource: ETSI TC-SPSReference: T/S 22-11ICS:33.080Key words:ISDN, supplementary service.Integrated Services Digital Network (ISDN);Meet-Me Conference (MMC) supplementary serviceFunctional capabilities and information flowsETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1993. All rights reserved.SIST ETS 300 165:1999



Page 2ETS 300 165: March 1993Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 165:1999



Page 3ETS 300 165: March 1993ContentsForeword.51Scope.72Normative references.73Definitions.84Symbols and abbreviations.85Description.86Derivation of the functional model.86.1Functional model description.86.2Description of the functional entities.96.3Relationship with a basic service.97Information flows.97.1Information flow diagrams.97.2Definition of individual information flows.108SDL diagrams for functional entities.108.1FE1.109Functional entity actions.229.1FEAs of FE1.2210Allocation of functional entities to physical locations.22Annex A (informative):Multiple connections to a MMC.23History.24SIST ETS 300 165:1999



Page 4ETS 300 165: March 1993Blank pageSIST ETS 300 165:1999



Page 5ETS 300 165: March 1993ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols &Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI),and is now submitted for the Vote phase of the ETSI standards approval procedure.In accordance with CCITT Recommendation I.130 [1], the following three level structure is used todescribe the supplementary telecommunications services as provided by European publictelecommunications operators under the pan-European Integrated Services Digital Network (ISDN):-Stage 1: is an overall service description, from the user's stand-point;-Stage 2: identifies the functional capabilities and information flows needed to support the servicedescribed in stage 1; and-Stage 3: defines the signalling system protocols and switching functions needed to implement theservice described in stage 1.This ETS details the stage 2 aspects (functional capabilities and information flows) needed to support theMeet-Me Conference (MMC) supplementary service. The stage 1 aspects are detailed in ETS 300 164(1992). The individual calls in an MMC are each basic calls with no special signalling functions, therefore nostage three standard is provided.SIST ETS 300 165:1999



Page 6ETS 300 165: March 1993Blank pageSIST ETS 300 165:1999



Page 7ETS 300 165: March 19931ScopeThis standard defines the stage two of the Meet-Me Conference (MMC) supplementary service for thepan-European Integrated Services Digital Network (ISDN) as provided by European publictelecommunications operators. Stage two identifies the functional capabilities and the information flowsneeded to support the service description. The stage two description also identifies user operations notdirectly associated with a call (see CCITT Recommendation I.130 [1]).This standard is specified according to the methodology specified in CCITT Recommendation Q.65 [2].This standard does not formally describe the relationship between this supplementary service and thebasic call, but where possible this information is included for guidance.In addition this standard does not specify the requirements where the service is provided to the user via aprivate ISDN. This standard does not specify the requirements for the allocation of defined functionalentities within a private ISDN; it does however define which functional entities may be allocated to a privateISDN.This standard does not specify the additional requirements where the service is provided to the user via atelecommunications network that is not an ISDN.The MMC supplementary service provides an user with the ability to arrange for a call between more thantwo participants, all participants accessing a conference bridge.No field of application and no conformance is specified to this standard. Therefore no method of testing isavailable.2Normative referencesThis standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references subsequent amendments to or revisions of any of these publications applyto this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]CCITT Recommendation I.130 (1988): "Method for the characterisation oftelecommunication services supported by an ISDN and network capabilities of anISDN".[2]CCITT Recommendation Q.65 (19
...

SLOVENSKI STANDARD
SIST ETS 300 165:1999
01-julij-1999
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL ,6'1 'RSROQLOQDVWRULWHYNRQIHUHQFD
VVUHþDQMHP 00& )XQNFLMVNH]PRåQRVWLLQLQIRUPDFLMVNLSUHWRNL
Integrated Services Digital Network (ISDN); Meet-Me Conference (MMC) supplementary
service; Functional capabilities and information flows
Ta slovenski standard je istoveten z: ETS 300 165 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 165:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 165:1999

---------------------- Page: 2 ----------------------

SIST ETS 300 165:1999
EUROPEAN ETS 300 165
TELECOMMUNICATION March 1993
STANDARD
Source: ETSI TC-SPS Reference: T/S 22-11
ICS: 33.080
ISDN, supplementary service.
Key words:
Integrated Services Digital Network (ISDN);
Meet-Me Conference (MMC) supplementary service
Functional capabilities and information flows
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1993. All rights reserved.
New presentation - see History box

---------------------- Page: 3 ----------------------

SIST ETS 300 165:1999
Page 2
ETS 300 165: March 1993
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 165:1999
Page 3
ETS 300 165: March 1993
Contents
Foreword.5
1 Scope .7
2 Normative references .7
3 Definitions.8
4 Symbols and abbreviations.8
5 Description .8
6 Derivation of the functional model .8
6.1 Functional model description .8
6.2 Description of the functional entities.9
6.3 Relationship with a basic service .9
7 Information flows.9
7.1 Information flow diagrams.9
7.2 Definition of individual information flows.10
8 SDL diagrams for functional entities.10
8.1 FE1.10
9 Functional entity actions.22
9.1 FEAs of FE1.22
10 Allocation of functional entities to physical locations.22
Annex A (informative): Multiple connections to a MMC .23
History.24

---------------------- Page: 5 ----------------------

SIST ETS 300 165:1999
Page 4
ETS 300 165: March 1993
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 165:1999
Page 5
ETS 300 165: March 1993
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols &
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI),
and is now submitted for the Vote phase of the ETSI standards approval procedure.
In accordance with CCITT Recommendation I.130 [1], the following three level structure is used to
describe the supplementary telecommunications services as provided by European public
telecommunications operators under the pan-European Integrated Services Digital Network (ISDN):
- Stage 1: is an overall service description, from the user's stand-point;
- Stage 2: identifies the functional capabilities and information flows needed to support the service
described in stage 1; and
- Stage 3: defines the signalling system protocols and switching functions needed to implement the
service described in stage 1.
This ETS details the stage 2 aspects (functional capabilities and information flows) needed to support the
Meet-Me Conference (MMC) supplementary service. The stage 1 aspects are detailed in ETS 300 164
(1992). The individual calls in an MMC are each basic calls with no special signalling functions, therefore no
stage three standard is provided.

---------------------- Page: 7 ----------------------

SIST ETS 300 165:1999
Page 6
ETS 300 165: March 1993
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 165:1999
Page 7
ETS 300 165: March 1993
1 Scope
This standard defines the stage two of the Meet-Me Conference (MMC) supplementary service for the
pan-European Integrated Services Digital Network (ISDN) as provided by European public
telecommunications operators. Stage two identifies the functional capabilities and the information flows
needed to support the service description. The stage two description also identifies user operations not
directly associated with a call (see CCITT Recommendation I.130 [1]).
This standard is specified according to the methodology specified in CCITT Recommendation Q.65 [2].
This standard does not formally describe the relationship between this supplementary service and the
basic call, but where possible this information is included for guidance.
In addition this standard does not specify the requirements where the service is provided to the user via a
private ISDN. This standard does not specify the requirements for the allocation of defined functional
entities within a private ISDN; it does however define which functional entities may be allocated to a private
ISDN.
This standard does not specify the additional requirements where the service is provided to the user via a
telecommunications network that is not an ISDN.
The MMC supplementary service provides an user with the ability to arrange for a call between more than
two participants, all participants accessing a conference bridge.
No field of application and no conformance is specified to this standard. Therefore no method of testing is
available.
2 Normative references
This standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references subsequent amendments to or revisions of any of these publications apply
to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] CCITT Recommendation I.130 (1988): "Method for the characterisation of
telecommunication services supported by an ISDN and network capabilities of an
ISDN".
[2] CCITT Recommendation Q.65 (1988): "Stage 2 of the method for the
characterisation of services supported by an ISDN".
[3] CCITT Recommendation I.112 (1988): "Vocabulary of terms for ISDNs".
[4] CCITT Recommendation Q.71 (1988): "ISDN 64 kbit/s circuit mode switched
bearer service".
[5] CCITT Recommendation I.210 (1988): "Principles of telecommunication services
supported by an ISDN and the means used to describe them".
[6] CCITT Recommendation Z.100 (1988): "Functional Specification and Description
Language (SDL)".
[7] Final draft prETS 300 164 (1992): "Integrated Services Digital Network (ISDN);
Meet-Me Conference (MMC) supplementary service; Service description".

---------------------- Page: 9 ----------------------

SIST ETS 300 165:1999
Page 8
ETS 300 165: March 1993
3 Definitions
For the purposes of this standard,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.