Mechanical standardization of semiconductor devices -- Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch ball grid array (FBGA)

Provides common outline drawings and dimensions for all types of structures and composed materials of fine-pitch ball grid array the terminal pitch of which is less than or equal to 0,80 mm.

Mechanische Normung von Halbleiterbauelemente -- Teil 6-5: Allgemeine Regeln für die Erstellung von Gehäusezeichnungen von SMD-Halbleitergehäusen - Konstruktionsleitfaden für Feinraster-Ball-Grid-Arrays (FBGA)

Normalisation mécanique des dispositifs à semiconducteurs -- Partie 6-5: Règles générales pour la préparation des dessins d'encombrement des dispositifs à semiconducteurs à montage en surface - Guide de conception pour les boîtiers matriciels à billes et à pas fins (FBGA)

Mechanical standardization of semiconductor devices - Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device package - Design guide for fine-pitch ball grid array (FBGA) (IEC 60191-6-5:2001)

General Information

Status
Published
Publication Date
31-Aug-2002
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2002
Due Date
01-Sep-2002
Completion Date
01-Sep-2002

Buy Standard

Standard
EN 60191-6-5:2002
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mechanical standardization of semiconductor devices - Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device package - Design guide for fine-pitch ball grid array (FBGA) (IEC 60191-6-5:2001)Mechanische Normung von Halbleiterbauelemente -- Teil 6-5: Allgemeine Regeln für die Erstellung von Gehäusezeichnungen von SMD-Halbleitergehäusen - Konstruktionsleitfaden für Feinraster-Ball-Grid-Arrays (FBGA)Normalisation mécanique des dispositifs à semiconducteurs -- Partie 6-5: Règles générales pour la préparation des dessins d'encombrement des dispositifs à semiconducteurs à montage en surface - Guide de conception pour les boîtiers matriciels à billes et à pas fins (FBGA)Mechanical standardization of semiconductor devices -- Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch ball grid array (FBGA)31.240Mehanske konstrukcije za elektronsko opremoMechanical structures for electronic equipment31.080.01Polprevodniški elementi (naprave) na splošnoSemiconductor devices in general01.100.25Electrical and electronics engineering drawingsICS:Ta slovenski standard je istoveten z:EN 60191-6-5:2001SIST EN 60191-6-5:2002en01-september-2002SIST EN 60191-6-5:2002SLOVENSKI
STANDARD



SIST EN 60191-6-5:2002



EUROPEAN STANDARDEN 60191-6-5NORME EUROPÉENNEEUROPÄISCHE NORMOctober 2001CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2001 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 60191-6-5:2001 EICS 31.080.01English versionMechanical standardization of semiconductor devicesPart 6-5: General rules for the preparation of outline drawings ofsurface mounted semiconductor device packages -Design guide for fine-pitch ball grid array (FBGA)(IEC 60191-6-5:2001)Normalisation mécanique des dispositifsà semiconducteursPartie 6-5: Règles générales pourla préparation des dessinsd'encombrement des dispositifs àsemiconducteurs à montage en surface -Guide de conception pour les boîtiersmatriciels à billes et à pas fins (FBGA)(CEI 60191-6-5:2001)Mechanische Normung vonHalbleiterbauelementeTeil 6-5: Allgemeine Regeln fürdie Erstellung von Gehäusezeichnungenvon SMD-Halbleitergehäusen -Konstruktionsleitfaden für Feinraster-Ball-Grid-Arrays (FBGA)(IEC 60191-6-5:2001)This European Standard was approved by CENELEC on 2001-10-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.SIST EN 60191-6-5:2002



EN 60191-6-5:2001- 2 -ForewordThe text of document 47D/437/FDIS, future edition 1 of IEC 60191-6-5, prepared by SC 47D,Mechanical standardization of semiconductor devices, of IEC TC 47, Semiconductor devices, wassubmitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60191-6-5 on2001-10-01.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2002-07-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2004-10-01Annexes designated "normative" are part of the body of the standard. In this standard, annex ZA is normative.Annex ZA has been added by CENELEC.__________Endorsement noticeThe text of the International Standard IEC 60191-6-5:2001 was approved by CENELEC as aEuropean Standard without any modification.__________SIST EN 60191-6-5:2002



- 3 -EN 60191-6-5:2001Annex ZA(normative)Normative references to international publicationswith their corresponding European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of anyof these publications apply to this European Standard only when incorporated in it by amendment orrevision. For undated references the latest edition of the publication referred to applies (includingamendments).NOTEWhen an international publication has been modified by common modifications, indicated by (mod), the relevantEN/HD applies.PublicationYearTitleEN/HDYearIEC 60191-61990Mechanical standardization ofsemiconductor devicesPart 6: General rules for the preparationof outline drawings of surface mountedsemiconductor device packages--SIST EN 60191-6-5:2002



SIST EN 60191-6-5:2002



INTERNATIONALSTANDARDIEC60191-6-5First edition2001-08Mechanical standardizationof semiconductor devices –Part 6-5:General rules for the preparation of outlinedrawings of surface mounted semiconductordevice packages –Design guide for fine-pitch ball grid array (FBGA)Normalisation mécanique des dispositifs à semiconducteursPartie 6-5:Règles générales pour la préparation des dessinsd'encombrement des dispositifs à semiconducteursà montage en surface –Guide de conception pour les boîtiers matriciels à billeset à pas fins (FBGA)PRICE CODE IEC 2001

Copyright - all rights reservedNo part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photocopying and microfilm, without permission in writing from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: +41 22 919 0300e-mail: inmail@iec.ch IEC web site
http://www.iec.chKFor price, see current catalogue Commission Electrotechnique Internationale International Electrotechnical CommissionSIST EN 60191-6-5:2002



– 2 –60191-6-5 © IEC:2001(E)INTERNATIONAL ELECTROTECHNICAL COMMISSION–––––––––––MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES –Part 6-5: General rules for the preparation of outline drawingsof surface mounted semiconductor device packages –Design guide for fine-pitch ball grid array (FBGA)FOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the InternationalOrganization for Standardization (ISO) in accordance with conditions determined by agreement between thetwo organizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4)In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60191-6-5 has been prepared by subcommittee 47D: Mechanicalstandardization of semiconductor devices, of IEC technical committee 47: Semiconductordevices.The text of this standard is based on the following documents:FDISReport on voting47D/437/FDIS47D/455/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.Thi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.